REPAIR / REPLACEMENT OF JOINERY, PANELLING AND OTHER CONNECTED BR WORKS AT B ARTY BDE AND OTHER LOCATION UNDER AGE B/R (P1), AGE B/R (P2) AT FARIDKOT MIL STN

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by engr-in-charge.

M&L Light shade Vitrified Ceramic tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over including 15 mm th screed bed CM (1:6) and poined in white or colour cement to match complete all as specified & directed by Engr-In-Charge.

S&F Premium quality glazed ceramic tile of size 450mm x 300mm thickness 7mm, water absorption between 10% to 20% pasted with spacer, tile adhesive and epoxy grouted with same make as of tile M

Taking down cement plaster from ceilings & brick walls including any type of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed by Engr-In-Charge.

M&L rendering 15mm thick in cement mortar 1:4 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed by Engr-In-Charge.

M&L rendering 15mm thick in cement mortar (1:6) on any face of Brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed by Engr-In-Charge.

Dismantling Wall and ceiling boards (fibre ,pulp,insulation etc ) or insulation board /slabs /blankts ,any thickness ,inculding cover fillets complete all as specified and directed by Engr-In-Charge

S & F Gypsum board 7 mm thick in ceiling fixed with screws as per manufacturer instructions plain/colour fixed with steel/GI snap grid(powder coated from bottom side) with T and L (26x24x1 mm thick) section of size 600x600 mm placed in ceiling L section fixed with wall with PVC rawl plugs and steel screws @ 600 mm centre to centre and suspended/ provided 14 Gauge(2 mm) galvanised bar not less than @ 1 sqm hanging arrangement and level including adjustable clips, complete all as specified and directed by Engr-In-Charge(and as specified in clause 10.38 of MES Scedule part-I complete) (Note: if any minor electrical fitting and fixtures distrubuted their in will be match and fix as adjusting)

S & F hollow PVC wall lining interlocking type 7mm thick plain/coloured /wood grain fitted in to the wall with PVC rawal plug and steel screws including fillets on joints as per manufacturers instruction etc complete all as specified and directed by Engineer-in Charge. Note : If any minor electric fittings and fixtures disturbed there will be match and fixed as existing.

Taking down of chowkats or frames exc 1.5 Sqm but n exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified

ake over including 15 mm thick rendereing CM (1:4) and poined in white or colour cement to match complete all as specified and directed. Make : Glosstra series of Samany or equivalent in Johnson/Kajaria

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and screw withdrawal strength of 2200 N (Face) and 1100N (edge), minimum compressive strength 58 N/ mm ² ,modules of elasticity 900 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note :- (i) Density is not less than 650 Kg/Cum (ii) Variation in profile size of frame ±5mm is allowed and contractor's quoted rate is deemed to include the same.

S&F 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed.

Taking down shutter of any description exc 1 sqm but n.exc 2sqm each & refixing the shutter in same opening including easing and adjusting complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter 30 mm thick comprising of virgin polymer of K value 58-60 (suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) and 900N (edge), minimum compressive strength 50 N/ mm², modules of elasticity 850 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant .WPC to be laminated with PVC coil of minium 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed countersunk stainless steel screws with decorative type beading complete all as specified and directed.

S&F 150 mm long, Stainless Steel butt hinges with stainless steel steel screws complete all as specified and directed.

S&F Stainless Steel barrel tower bolts, 200 mm long of extruded section complete all as specified and directed.

S&F Stainless Steel sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed complete all as specified and directed .

S&F 140 mm floor door stopper of Stainless Steel body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed .

M&L for preparation of new or previously untreated wood or wooden based surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and screw withdrawal strength of 2200 N (Face) and 1100N (edge), minimum compressive strength 58 N/ mm ² ,modules of elasticity 900 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note:- (i) Density is not less than 650 Kg/Cum (ii) Variation in profile size of frame ±5mm is allowed and contractor's quoted rate is deemed to include the same.

M&L two coats of cement base paint over a coat of white washing to new plastered surface on wall including preparation complete all as specified and directed by Engineer - in - Charge.

S&F stainless Steel handle 150 mm size complete all as specified and directed.

Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed.

Supply and fix aluminum composite sheet cladding using 4 mm thick sheet of approved make consisting of a core of 3mm natural polyethylene core sandwitched between two skins (0.5mm each) of aluminum alloy with outer surface in all colour coating of PVDF paint in fully automatic coil coating process. The PVDF coated finished surface to factory protected with self-adhesive peel offoil tested to withstand at least 6 months exposure to local weathering conditions. The composite sheet cut and bend to shape profiles as required to, including perimeter extrusions base frame, extruded stiffeners, expansion fasteners & silicone sealant (Dow corning 789) required for installation as per approved elevation drawing as directed including necessary accessories complete in all respects. The rates shall be including the cost of all materials, tools, tackles, manpower, fuel, consumables, lead and lifts at all levels, design, fabrication, erection, finishing and dismantling of scaffolding and testing of water tightness, etc. as per manufacturerer's instructions / specifications complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) in Window Grill made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the Grill with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size as Specified and Directed by Engr-in -Charge

Supply and fix factory made uPVC white colour three track three panels sliding window (area exceeding 1 Sqm and not exceeding 2 Sqm) with fly proof SS wire mesh ( Two Nos Glazed & One Number Wire Mesh panels) up to 1.5m height made of (big series) frame 90 x 42 mm & sash 31x57 mm both having wall thickness of 2.3+0.2 mm and single/double glazing bead of appropriate dimension (Area of window above 1.75 Sqm) comprising of uPVC multi chambered frame, within built roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanised mild steel section made from roll forming process of required length section made from forming process of required length (Shape & size according to uPVC profile). Appropriate dimension extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white power coated ) touch locks with hooks, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 Kg) GI fasteners 100x8mm sizes for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality (as per approved sample) including fixing 6 mm thick toughened glass (6 mm thick thoughened glass paid separately) and wire cloth stainless steel 304 grade, natural finish 0.36 mm niominal dia of wire and average width of aperture 1.40mm complete all as specified.

S&F toughened glass of 6 mm thick cutting to required shape , drilling holes as required complete all as specifed and directed .

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-inCharge.

S&F in repair Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-inCharge.

S & F in repairs Mortice lock, vertical type, size 100 mm complete all as specified and directed by engr-in-charge.

S&F in repair 250 mm long SS , sliding door bolt with hasps staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed complete all as specified and directed by engr-in-charge.

S&F in repair door closer hydraulically(Aluminium body) regulated designation No 3 universal type suitable for door shutter 1000mm to 1200mm vide and weight between 60.0 kg to 80.0 kg all as specified and directed by Engr-in-Charge.

M & L in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as direction by Engr in charge.

Hacking out old broken glass any thickness quality from wooden frame or stone glazed with putty complete all as specified and directed by engr-in-charge.

M & L for 4 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters) in Squares n.exc 0.5 sqm each complete all as specified and directed by engr-in-charge.

M & L for 4.0 mm thick frosted glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed by Engr-in-charge.

Securing glass of any description in existing metal frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, fixing neoprene EPDM rubber Gasket to match existing work (New length of frame shall be measured) complete all as specified and directed by Engr-In-Charge.

Dismantling of boarding any description fixed in any position with nails complete all as specified.

M&L for 18/19 mm thick both side prelaminated (One side decorative and one side plain) particle board exterior grade fixed with screws to timber frame work complete all as specified

S &F 30mm width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised all as specified

S&F magnetic catcher of size 100mm fixed with screws complete all as specified and directed.

S&F In repair Framed work such as grills, gratings coolar stand, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying a coat of red oxide zinc chrome primer and two coats of synthetic enamel paint (for steel surfaces) including preparation of surface complete all as specified.

S&F in repair MS powder coated decorative drapery rod (colour as approved) of 20mm dia approved pattern & design including decorative knobs (wall side and free side) & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs/grips complete all as specified

M&L preparation of newly plastered or unplastered surfaces of wall and applying plaster of paris putty of 1mm thickness over plaster surface to prepare the surface even and smooth and distempering walls with two coats of distemper oil emulsion (white/tinted) after finishing the surfaces with a coat of wall care putty by hand roller complete all as specified and directed .

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

S&F 30 mm thick 2nd class hard wood plain framed pannel shutters (any number of pannels) with pannels of timber flat on both sides (feather edges) or of vaneered partical board medium desnsity, wood partical board with commercial face veneers fitted to chowkats complete all as specified and directed by Engr-in -Charge

S&F 100 mm long Stainless steel butt hinges

S&F 150 mm long Stailess steel barrel tower bolts of extruded section and fixed

S & F 150 mm long aluminium handles, fabricated type, anodised complete all as specified and directed by engr-in-charge.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasps staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws,all complete as per the direction of Engineer-in-charge

S&F Aluminium shutters for door/window / ventilator (glazed and gauzed both),side hung type without sash bars, aluminum section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing, clips, rubber packing, anodised aluminium snap beading screws,aluminium fitting such as peg stays 150mm long (01 nos), hinges type B-21 100mm long (02 Nos) suitable handle (01 No), tower bolt 150 mm long (02 Nos) in each shutter if req with powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed. Note: Only Glass and wiremesh will be measured and paid seperately.

M&L 5.5 mm thick, plain sheet glass ordinary quality and glazing with oil putty or with wooden beads in squares exc 0.5 Sqm in each pane complete all as specified by Engineer in Charge.

S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-inCharge.

M&L for marble work 18 to 20 mm thick of any shade (table rubbed and polished ) in steps, jambs , window cill cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over 1:6 CM , 20 MM screed bed complete all as specified and directed .