Electrical renovation work in LASER Additive Manufacturing Lab. of B-block building at RRCAT, Indore.

Amount

Supply, Installation, Testing & Commissioning of indoor decorative 2'X2' surface/recess mounted high efficiency LED luminaire with CRCA powder coated housing with minimum efficacy: 100 lm/W, nominal lumen output: 4000 lm, Colour tempreture: 5700/6500 K, minimum pf: 0.9, THD: < 10%, minimum CRI: 80 , Optics: High quality diffuser complete with all accessories, driver & all required fixing accessories & hardware etc.

Supply, Installation, Testing & Commissioning of indoor decorative recess mounted, round, LED type downlighter with CRCA powder coated housing with minimum efficacy: 100 lm/W,nominal lumen output: 1600 lm, Colour tempreture: 5700/6500 K, minimum pf: 0.9, THD: < 10%, minimum CRI: 80 , Optics: High quality diffuser complete with all accessories, driver & all required fixing accessories & hardware etc.

Supply, installation, testing & commissioning of enegry efficient, output T8 LED tube having nominal output: 4000 lm, nominal wattage as 30 W, light colour: 865, beam angle: 160° on existing all types conventinal linear lumianires installed on wall/ceiling/all type of false ceing along with supply & installtion of suitable size FRLS PVC gre/white wiring required for T8 LED tube with connector & connecting holder (if required). This includes removal of existing lamps, all types of ballasts, starter & associated wiring etc and storing within 2.5 km radius. This item also includes all required material/hardware & scaffoldings/ladder/atcker etc required for installation at site

Incomer: 160 A TP MCCB (Ics ≥ 36 kA) with Microp. trip release for over load & short circuit protection Outgoing: 32/25/20A TP MCB (10 kA) - 8 Nos. 8 way/phase VTPN DB

Incomer: 160 A TP MCCB (Ics ≥ 36 kA) with Microp. trip release for over load & short circuit protection Outgoing: 32/25/20/16A SP MCB (10 kA) - 36 Nos. 12 way/phase VTPN DB

Incomer: 100 A TP MCCB (Ics ≥ 36 kA) with Microp. trip release for over load & short circuit protection Outgoing: 32/25/20/16A SP MCB (10 kA) - 12 Nos. 4 way/phase VTPN DB

Incomer: 32 A FP RCBO Type AC, 30 mA (10 kA) Outgoing: 10/6 A SP MCB (10 kA) - 24 Nos. 8 way/phase VTPN DB

Supply, pulling & end termination of 1100 V voltage grade FRLS PVC insulated copper flexible wires.

Supply and Installation of following size ERW MS conduit pipes to be installed inside the RCC slab/inside the bricks wall/surface/on Metallic structure along with bends, junction boxes, metallic boxes, sadle, clamp, binding wire & all required materials. The jointing of two section of conduit shall be done using threaded section of conduit. For mounting of conduit, any cutting/chasing in the RCC/brick wall shall be part of the work

20 mm ERW MS conduit

25 mm ERW MS conduit

32 mm ERW MS conduit

Supply, Installation, Testing & Commissioning of concealed in wall/surface mounted modular type switch board of suitable size with following accessories: White cover plate with metal frame, concealed in wall/surface mounted metal/plastic box respectively, blanking plate and all required accessories

2 x 16 A, 230/240 V one way switch and 2 x 6/16 A, 3/5 pin Socket board with all accessories

2 x 6 A, 230/240 V one way switch with all accessories

2 x 6 A, 230/240 V two way switch with all accessories

16 x 6 A, 230/240 V one way switch with all accessories

RJ45 Modular data socket board suitable for CAT-6 cable

RJ11 Modular telephone socket board

Supply, pulling and end termination of following communication cable in concealed/surface mounted MS conduit pipes/PVC wireway/raceway/casing-caping along with supply of all required material/hardware

4 Pair unshielded Twisted pair CAT-6 UTP cable including required hardware

2 pair, 0.5 ATC telephone cable including required hardware

Supply, Installation, Testing & Commissioning of concealed/surface mounted prefabricated industrial power outlets along with supply of all required material/harware. The make of MCB/MCCB using for this item shall be identical with swicthgear of upper end wall distribution board.

Prefabricated Three phase 5 pin, 32 A metal clad socket 3P+N+E with 32 A FP MCB and plug & top

Prefabricated single phase 3 Pin, 20A metal clad socket with 20 A SP MCB and plug & top

Only Installation, Testing and Commisioning of 1100 V voltage grade Aluminium XLPE insulated, Armoured, FRLS PVC sheathed power cable on wall/cable tray/trench by supply and fixing of clamps and other required hardware

3.5 C X 70/50 sq. mm. Cable

3.5 C X 35/25 or 4 C X 25/16/10 sq. mm. Cable

Supply, Installation, Testing & Commissioning of end termination of 1100 volt voltage grade Aluminium Armoured XLPE/PVC power cable by using double compression Nickel Plated Brass Gland, Aluminium Small/Medium/Long barrel Lug and earth clamps duly connected to the equipment ground through GI/Copper Conductor. This includes Supply of end jointing materials with all accessories

3.5 C X 70/50 sq. mm

3.5 C X 35/25 or 4 C X 25/16/10 sq. mm

Only Installation, Testing & Commissioning of 0.5 mm, 10 pair JFTC armoured telephone cable in trench/humepipes/cable tray/wall along with supply of all required material/hardware

Supply, Installation, Testing & Commissioning of end termination of 10 pair telephone cable along with supply of all required material/hardware

Supply, Installation, Testing & Commissioning of concealed/ surface mounted 20 pair TDB (IP42) in prefabricated MS enclosure with back mounting frame & KRONE disconnection type module along with supply of all required material/hardware

Supply and Installation of Prefabricated 50 x 50 mm PVC trunking system with covers, bends, raiser & all required mounting accessories & hardware

Supply and Installation of ladder type GI cable tray of 100 mm side channel & 300 mm wide

Supply and Installation of following strip/wire of required size under ground at a depth of 600 mm from FGL including excavation, black bitumin painting, backfilling and consolidation of soil. / in trench / on wall / MS structure / through hume pipes / along cable trays etc. Installtion along cable trays / metallic structure / walls using G. I. clamps / saddle & spacer at interval of 500 mm / as per site requirements including required hardware

G. I. earth strips (50X6/32X6/25X3mm) / 8/10/14/16/18 SWG wire

Earthing copper strip (100x6/100x3/80x6/80x3/50X6/32X6/25X3mm) / 8/10/14/16/18 SWG wire.

Supply, installation, testing & Commissioning of sheet steel panel and M. S. boxes with complete chemical and mechanical process on M. S. sheet or angle etc. Powder coated, rubber, gasket, locking arrangement, earthing bolt etc. shall be provided on the fabricated item as per requirement and specifications

Stuctural Steel work including Supply, Cutting, Fabricating, Welding, necessory scaffolding erecting & fixing in position, including painting with a primer coat of approved steel primer

Supply, Installation, Testing & Commissioning of GI plate Earth Stations of 600X600X6.3mm size along with supply of all required material/hardware

Dismantling of following electrical items

Dismantling and stacking of MCCB/MCB based concealed in wall/surface mounted MS power distribution board size of > 0.5 x 0.5 x 0.3 to < 1.0 x 1.0 x 0.3 m with all switchgears and accessories having following size including removal of switchgears and end termination of power cables etc. and safe storing within the 2.5 km radius with suitable vehicle

Dismantling of switch board / power point / ac point / metal clad / network point / telephone point with all accessories from existing installed location and safe storing within the 2.5 km radius with suitable vehicle

Dismantling of power/lighting/communication circuit (bunch of wires) installed in surface/concealed MS/PVC conduit or PVC casing-n-caping from wall/roof/ceiling including dismantling of surface MS/PVC conduit or PVC casing-n-caping and storing with in the 2.5 km radius

Dismantling of 3.5 C X 400/240/150/120 sq. mm. cable 1100 V voltage grade Aluminium PVC/XLPE insulated, Armoured, PVC sheathed electrical power cables already connected with L. T. panel/power distribution boards including disconnection of end termination from L. T. panel/power distribution boards, from wall & trench & safe storing within the 2.5 km radius with suitable vehicle

Dismantling of 3.5 C X 70/50/35/25 or 4 C X 25/16/10/6 sq. mm cable 1100 V voltage grade Aluminium PVC/XLPE insulated, Armoured, PVC sheathed electrical power cables already connected with L. T. panel/power distribution boards including disconnection of end termination from L. T. panel/power distribution boards, from wall & trench & safe storing within the 2.5 km radius with suitable vehicle

Dismantling of 1 x 40 W or 2 x 40 W flourescent lamp luminaire from existing installed location and safe storing within the 2.5 km radius with suitable vehicle

DYNAMIC ENGINEERS AND CONTRACTORS

P.B.ELECTRICALS

FLASHCUNSULTANT & CONTRACTOR

RAJESH GAWDE