Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.8 LAccepted-AOC 1308 MAIN ROAD BABINACANTT DIST JHANSI 284 401 | BABINA | JHANSI | UTTAR PRADESH | 284401 | L1 | Accepted-AOC Being a L1 bidder | |
| 2 | L2₹30.7 L+₹1.7 L (5.94%)Rejected-Finance 640 MAIN ROAD BABINA CANTT JHANSI UP 284401 | JHANSI | JHANSI | UP | 284401 | L2 | Rejected-Finance Other than
lowest
bidder | |
| 3 | L3₹31.0 L+₹2.1 L (7.12%)Rejected-Finance | L3 | Rejected-Finance Other than
lowest
bidder | |
| 4 | L4₹33.5 L+₹4.5 L (15.7%)Rejected-Finance | L4 | Rejected-Finance Other than
lowest
bidder | |
| 5 | L5₹34.4 L+₹5.5 L (18.9%)Rejected-Finance | L5 | Rejected-Finance Other than
lowest
bidder |
Tender Value
₹47.8 L
EMD Value
₹95,600
Closing Date
29 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BABINA
GE BABINA CANTT 284401
SPECIAL REPAIR TO CERTAIN BLDGS AT AGE B/R-I UNDER GE BABIBA CANTT
2023_MES_625516_1
8178/E8
Open Tender
Civil Works
Item Rate
180 days
GE BABINA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE BABINA
₹95,600
Yes
30 Jan 2024
28 Oct 2023
1 Dec 2023
28 Oct 2023
29 Nov 2023
15 Nov 2023
Amount
Demolition of PCC/lime concrete (Other than Ground flooors) terracing including felt in any description and in any position over roof etc complete all as specified and as directed by the Engineer-in-Charge.
M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed.
Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.
M&L, roughening surfaces of old concrete roof by picking ,sweeping clean and washing down with water to remove dust etc and applying a coat of cement slurry @ 3 Kg per Sqm complete all as specified and directed.
M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and as directed.
M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stil green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed.Note :- Water proofing compound shall be measured separately as supply only in item no 05
Supply only integral water proofing compound complete all as specified and as directed.
M&L for applying water proofing treatment with the following:- (a) First coat of bitumen primer conforming to IS-3384 @ 0.3Kg / sqm to be applied on prepared surface till the surface is properly impregnated. (b) The water proofing memberne minimum weight 3kg/sqm and minimum 3mm thick reinforced with polyestered non woven fabric (weight not less then 160gms/sqm) shall be laid on the primed surface by torch application method as per manufactured instruction including Aluminium paint complete as spd. (c) All joints and change in direction should be curved with cement mortar (1:3) mixed with SBR latex @ 200ml per bag on cement and cured well before laying of membrane.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cuttingexceeding 10 cm but not exceeding 20 cm girth in brick walls complete all as specified and as directed.
Taking up or down existing steel water tubing 15 mm bore and connections including cleaning for refixing or removal to store complete all as specified and as dircted
Taking up or down existing steel water tubing 20 mm bore and connections including cleaning for refixing or removal to store complete all as specified and as dircted
Supply and fixing, jointing and testing galvanised iron tubing 15 mm bore medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor etc with new fittings complete all as specified and directed.
Supply and fixing, jointing and testing galvanised iron tubing 20 mm bore medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor etc with new fittings complete all as specified and directed.
Fixing only old steel tubing 15mm dia and connections obtained from taken down against item No 3 herein before in new or old position fixed to wall, ceiling or laid in floor with new fittings etc complete all as specified and as directed.
Fixing only old steel tubing 20mm dia and connections obtained from taking down against item No 4 herein before in new or old position fixed to wall, ceiling or laid in floor with new fittings etc complete all as specified and as directed.
S & F 1000ltr rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991 including 20 mm dia GI pipe light grade washout pipe 450 mm long with plug and 20 mm dia GI pipe light grade over flow pipe 600 mm long with fitting and dismantling of existing unserviceable tank and removing from site, complete all as specified and directed.
Fixing only old 1000 ltr capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing complete all as specified and as directed.
S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 210 gms ), complete all as specified and directed
S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.
Demolition of Brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and as directed
M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6) to raise the hight of brick wall complete all as specified and as directed.
M& L, Brickwork, with subclass ‘B’ bricks old size straight or curved on plan exc 6 M radius built in CM 1:6 but except Bricks etc complete all as specified and directed.
Taking down cement plaster on brick or stone wall including raking out joints, hocking for key scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of wall, finish even and smooth without using extra cement on concrete/brick surfaces in CM 1:4, complete all as specified and as directed
M & L for preparation of new plastered surface of wall and applying two coats of cement base paint on external wall surface over a coat of alkali resistant primer complete all as specified and as directed.
Demolition of PCC in any description and in any position etc complete all as specified and as directed
M&L for 75mm thick cement concrete 1:3:6 type C-1, (using 20mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed
M&L for 100mm thick cement concrete 1:2:4 type B2, (using 40mm graded aggregate) as in floor/hardstanding, finished even and smooth without using extra cement complete all as specified
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick in CM(1:6) etc complete all as specified and directed.
S&F stainless steel kitchen plate rack overall size 900mm x 900mm made out of 0.80mm thick stainless steel sheet etc complete all as specified and directed.
S & F in repair Grating doom 125mm dia of PTMT (Minimum weight 25gms) with hole/ without hole including fixing with white cement and making good surface complete all as specified and directed.
Supply and fixing in repair PVC waste pipe with 32 mm bore and 65 cm long with cap complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L, for PCC 1:2:4 type B-0 using 12.5 mm graded stone agg as in levelling course of floors of 25 mm thick complete all as specified and directed.
M&L, screed bed or bedding layer of mortar 15 mm thick in cement mortar 1: 6 to receive tiles etc finished rough complete all as specified and directed.
M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18sqm but not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with floor etc complete all as specified and as directed.
M&L for rendering 10mm thick in cement mortar 1: 3 on faces of brick work or concrete surfaces, finished rough to receive tiles etc complete all as specified and directed.
M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18sqm but not exc 0.36 sqm, in vertical surface as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with floor etc complete all as specified and as directed.
M&L for joint free glazed coloured tiles 350x250x7mm/450x350x7mm thick for work on vertical surface, set & jointed in cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed
Supply and fix vitreous china wash basin white flat back size 630x450mm including cutting for and pinning in ends of brackets or erecting stand,waste coupling,32 mm bore PVC waste pipe of suitable length, and connection complete all as directed complete all as specified and as directed.
S&F stainless steel curtain rod grading H-304, 25mm dia as in curtain rod etc complete and as directed.
Supply and Fixing Stainless steel round knob at both end of curtain rod of 25mm dia etc complete and all as specified and directed.
S&F stainless steel bracket suitable for curtain rod of 25 mm dia and fixed in position on walls with wooden cleat/ rawel plug complete all as specified and directed .
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.
Dismantling fencing wire mesh with MS iron fencing post any type complete all as specified and as directed.
Excavating in post holes (or similar holes) each n exc 0.5cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.
M&L PCC 1:3:6 type C-1 (using 20mm graded stone aggt) as in foundation, filling and mass concrete complete all as specified and directed.
S&F post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for barbed wires etc, flat iron fillets (for securing wire mesh) including all necessary drilling, bolting or riveting etc complete all as specified and as directed.
S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured) complete all as specified and as directed.
S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed
M&L, preparing for new steel surfaces and applying two coats of synthetic enamel paint over one coat of rex oxide primer over 10 cm width or girth complete all as specified and as directed.
M/s Ravi Traders
Shree Jee Associates
M/s Hansraj Shivhare
M/S Chadha Brothers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .