GE 861 EWS-74/2024-25

Amount

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed by Engineer-in-Charge.

Dismantling timber scantlings (unframed) in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by Engineer-in-Charge.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by Engineer-in-Charge.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed by Engineer-in-Charge.

M&L for 15mm thick rendering on fair faces of brick work or concrete wall surfaces with cement mortar (1:4) and rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed by Engineer-in-Charge.

M&L for 15mm thick rendering on fair faces of brick work or concrete wall surfaces with cement mortar (1:6) and rendering is to be finished even and smooth (without using extra cement) complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class hard wood Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads exc 13 Sqcm and n exc 25 sqcm complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class hard wood Plain fillets square, rectangular or triangular in section, clean sawn, bull nosed, splayed, chamfered or rounded on one edge or face secured with nails or brads exc 6 Sqcm and n exc 13 sqcm complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class hard wood Plain fillets. square, rectangular or triangular in section, clean sawn, bull nosed, splayed, chamfered or rounded on one edge or face secured with nails or brads n exc 6 sqcm complete all as specified and directed by Engineer-in-Charge.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed by Engineer-in-Charge.

S&F 6mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work on ceiling complete all as specified and directed by Engineer-in-Charge.

S&F 6mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work on wall surfaces complete all as specified and directed by Engineer-in-Charge.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engineer-in-Charge.

M&L colour non - skid joint free Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding or cement mortar of (1:4) complete all as specified and as directed by Engineer-in-Charge.

Description as as per Srl Item ser No 16 herein above but in vertical surfaces as in skirting, dado etc,. over and including 10mm thick rendering of cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

M&L white colour non - skid joint free Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding or cement mortar of (1:4) complete all as specified and as directed by Engineer-in-Charge.

M&L coloured Glazed ceramic tiles in vertical surfaces 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering of cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15mm thick screed bed or bedding of cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick screed bed or bedding of cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.

S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed by Engineer-in-Charge.

M&L for Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.

M&L for reinforcement cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-Charge.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

M&L for Formwork to soffits of suspended flat slabs such as roof slabs, floor slabs, landings and similar work; rough surface not exceeding 200mm thick (Horizontal or sloping) surface should be fair and finished surface complete all as specified and as directed by Engineer-in-Charge.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding of cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but n exc 4.0 sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames including hardware) complete all as specified and as directed by Engineer-in-Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed by Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engineer-in-Charge.

S&F Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified and as directed by Engineer-in-Charge.

S&F Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed by Engineer-in-Charge.

S&F 2nd class hardwood Plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified complete all as specified and as directed by Engineer-in-Charge.

S&F 35mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats complete all as specified complete all as specified and as directed by Engineer-in-Charge.

S&F 35mm thick 2nd class hardwood factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified complete all as specified and as directed by Engineer-in-Charge.

S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21complete all as specified and as directed by Engineer-in-Charge.

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engineer-in-Charge.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engineer-in-Charge.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 15mm bore Stop valves, fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 32mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engineer-in-Charge.

S&F 100mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs vitreous Chinaware Water closet (Squatt pattern) squatting pan, ‘Orissa’ pattern, size 680 x 470 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets Flushing cistern and flushing pipe (exclusive of brackets), fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Vitreous China bowl urinal flat back, size of 430 x 370 x 340 mm white Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60gms) complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Waste coupling of PTMT (half or full threaded) for urinals, (Minimum weight 32mm-45gms) complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 15mm bore Bib taps, fancy type, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 15mm bore Stop valves, fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 100 mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 125mm long brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-Charge.

Dismantling 1000 ltr capacity PVC water storage tank complete all as specified and as directed by Engineer-in-Charge.

S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered, hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed by Engineer-in-Charge.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed by Engineer-in-Charge.

Taking up or down 15mm dia steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed by Engineer-in-Charge.

Taking up or down 20mm dia steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed by Engineer-in-Charge.

S&F Tubes, 15mm dia bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-Charge.

S&F Tubes, 20mm dia bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Vitreous China wash basin, white, flat back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and vitreous china pedestal complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 32mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engineer-in-Charge.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in-Charge.

S&F 110mm dia PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 15mm bore fancy type Brass CP mixer for wash basin mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engineer-in-Charge.

S&F 4.00mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed by Engineer-in-Charge.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed by Engineer-in-Charge.

M&L including preparation of old decorative wall surfaces with complete removal of existing treatment and applying two coats of oil bound distemper over a coat or alkali resistant primer over a coat of 1mm thick wall care putty complete all as specified and as directed by Engineer-in-Charge.

M&L including preparation of old decorative wall surfaces with complete removal of existing treatment and applying two coats of cement based paint over a coat or alkali resistant primer complete all as specified and as directed by Engineer-in-Charge.

M&L including preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat or alkali resistant primer complete all as specified and as directed by Engineer-in-Charge.

M&L including preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat or alkali resistant primer complete all as specified and as directed by Engineer-in-Charge.

M&L including preparation of old decorated wall surfaces with complete removal of existing treatment and applying three coats of white wash over a coat chalk white primer complete all as specified and as directed by Engineer-in-Charge.

M&L including preparation of newly wooden surfaces and applying two coats of synthetic enamel paint over a coat or pink primer complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully aluminium/copper point wiring (light fan socket or power) complete with fitting such as switches, tube lights, ceiling rose, pendants, regulators, MCB DB, MCB'S, Main switch from control board and making good disturbed surfaces of walls, floor to match with existing and keeping items aside in safe custody for reuse such as regulators, light fitting, MCBs complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS/ wooden sunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed by Engineer-in-Charge.

Description all as per Srl Item No-84 here in above but for one 3 pin 5A socket outlet independent controlled by one switch.

Description all as per Srl Item No-84 here in above but for one 5A socket outlet on the same board controlled by one switch.

Description all as per Srl Item No 84 above but for 3 pin socket outlet 15 Amps independent board with 2.5 Sqmm complete all as specified and directed by Engineer-in-Charge.

Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 230 volts complete all as specified and directed by Engineer-in-Charge.

M&L for switch socket combination out let 5 amps 5 pin flush type, 230 volts complete all as specified and directed by Engineer-in-Charge.

Supply and fixing socket out let, 6 pin 5 and 15 amps multi purpose 2 in 01 flush type, 230 volts complete all as specified and directed by Engineer-in-Charge.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and directed by Engineer-in-Charge.

Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified and directed by Engineer-in-Charge.

S&F in replacement decorative ultra slim linear LED 18 Watt 4' long warm/White colour lighting fixture with extruded al heat sink, environment friendly, energy efficient ready to use pack including LED tube complete with inbuilt electronic driver, PCB, connector block etc. including connecting up three copper flexible cable from ceiling rose to fittingscomplete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED Lamp 9 W complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED Round Down light 6 W Yellow/White complete all as specified and directed by Engineer-in-Charge.

Supply & fixing sheet metal enclosure double door, single pole and neutral, AC 240 volts, 8 way with 200 Amps rated copper bus bar and IP-43 protection with metal double door and flush to wall and making good including two coats of white/ colour washing/ distempering etc to match the existing disturbed surfaces complete all as specified and directed by Engineer-in-Charge.

S&F in replacement MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified and directed by Engineer-in-Charge.

S&F in replacement MCB, DP (Double Pole), AC, 240 volts, B series capacity 32/40 Amps 10kA and making connections complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Isolator 4 Pole 'B' series 63 amps capacity AC 415 V, 10kA complete all as specified and directed by Engineer-in-Charge.

Supply and fixing including taking down old unserviceable 1100 volt grade flexible copper conductor cable 1.5 sqmm two core complete all as specified and directed by Engineer-in-Charge.

Supply and fixing including taking down old unserviceable 1100 volt grade copper conductor cable single core 1 sq mm complete all as specified and directed by Engineer-in-Charge.

Description all as per Srl Item No 101 above but size of cable 1.5 Sqmm complete all as specified and directed by Engineer-in-Charge.

Description all as per Srl Item No 101 above but size of cable 2.5 Sqmm complete all as specified and directed by Engineer-in-Charge.

S&F including taking down 1100 volts grade service cable with PVC insulated aluminium conductor 4 Sq mm nominal cross section 2 core complete all as specified and directed by Engineer-in-Charge.

Description all as per Srl Item No 104 above but size of conductor 6 Sqmm 2 core complete all as specified and directed by Engineer-in-Charge.

Description all as per Srl Item No 104 above but size of conductor 10 Sqmm 2 core complete all as specified and directed by Engineer-in-Charge.

Description all as per Srl Item No 104 above but size of conductor 16 Sqmm 2 core complete all as specified and directed by Engineer-in-Charge.

Supply and fixing casing capping 20 mm complete all as specified and directed by Engineer-in-Charge.

S&F in replacement LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engineer-in-Charge.

S&F in replacement LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed by Engineer-in-Charge.

S&F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Bed switch 5/6A complete all as specified and directed by Engineer-in-Charge.

M&L for switch socket combination out let 5/6 amps 5 pin flush type, 230 volts with box complete all as specified and directed by Engineer-in-Charge.

M&L for switch socket combination out let, 6 pin 5 and 15/16 amps multi purpose 2 in 01 flush type, 230 volts with box complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing exhaust fan 250 mm sweep PVC body with louver, 230 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/sheet, including connection cable, nut bolt and other fixing material complete all as specified and directed by Engineer-in-Charge.

Supply and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat,NRV, connection piece etc. complete as per existing surface complete all as specified and directed by Engineer-in-Charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) ® complete all as specified and directed by Engineer-in-Charge.

S&F in repairs connecting and testing change over switch 4 pole 415 volts on load of rating 63 Amp and including sheet enclosures complete including taking out to old unserviceable switch complete all as specified and directed by Engineer-in-Charge.

S&F tinned copper fuse wire for Transformers and the like as per existing gauge and rating complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking up or down old existing steel tubing and connections of any description/grade and in any position in trenches/under floors/on walls etc complete all as specified and directed by Engineer-in-Charge for the following sizes :-(a) 20mm bore

Supply, laying, jointing and testing in trenches, galvanized iron water tubing medium grade (ISI marked) including provision of all necessary steel fittings/ accessories complete all as specified and directed by Engineer-in-Charge for the following sizes :- (a) 20 mm bore

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr deep in soft/loose soil and getting out for taking down/laying Pipe lines of any description and in any position including forming sides and bottom surface to required level/ gradients complete all as specified and directed by Engineer-in-Charge.

Returning filling in, excavated soil including spreading, levelling, watering and well ramming in layers of thickness not exc. 25cm in each layer complete all as specified and directed by Engineer-in-Charge.

Removing excavated surplus soil to a distance not exc. 50 Mtr and depositing the soil where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed by Engineer-in-Charge.

Supply, fixing, jointing and testing, ISI Marked, of approved quality, gun metal globe/gate valve with iron wheel head, both ends screwed for iron pipe including taking down old one complete all as specified and directed by Engineer-in-Charge for following bore of pipes:- (a) 20mm bore

M&L for Cutting of the existing 100mm bore CI pipe line for rectifying leakage and reducing to required length, in position, for insertion of collars or other fittings including dewatering etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing wall mounted fan 450mm high speed, 230 volts single phase with jerk free oscillation, smooth running, three blades, pull cords including fixing arrangement complete all as specified and directed by Engineer-in-Charge.

Asian Marketing Co (BID ID -3198395)

M/S Manzoor and Co (BID ID -3198028)

M/S SHEIKH FEROOZ AHMAD (BID ID -3187983)

M/S STARE BUILDERS (BID ID -3197908)

M/S NEW IQBAL ENTERPRISES (BID ID -3192333)

JANDOO AND CO (BID ID -3198201)