Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹8.0 Craccepted-aoc | ₹8.0 Cr | accepted-aoc |
Tender Value
₹7.5 Cr
EMD Value
₹10 L
Closing Date
16 Mar 2026, 9:30 pmClosed
Bengaluru Central City Corporation
MOHAMED JAVEED
Improvements and construction of Roads, Drains and Footpaths at Shivaji Nagar Assembly Constituency (Package-04) for the year 2025-26 (Comprising of 03 works of Govt anexure-1)
BCCC/2025-26/OW/WORK_INDENT211/CALL-2
BCCC/2025-26/OW/WORK_INDENT211/CALL-2
Open
Other Works
Two Tender Document System(Two Cover)
BCCC Shivajinagar Division
6 documents required · 6 mandatory
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. 1490.00Lakhs)
Satisfactoriy completed (atleast 50%) as prime contractor at-least one such similar work of value not less than Rs. 373.00(50% of estimated cost of tender)
Owning the following key and critical equipment for this work
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
Liquid assets and /or availability of credit facilities of no less than Rs. 223.00 Lakhs (estimated cash flow for 3 months of peak construction period)
Banker Details for reference
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years
List of Financial Resources with Certificates
License
₹5,000
₹10 L
16 Mar 2026
7 Mar 2026
17 Mar 2026
12 Mar 2026
11 Mar 2026
Improvements and construction of Roads, Drains and Footpaths at Shivaji Nagar Assembly Constituency (Package-04) for the year 2025-26 (Comprising of 03 works of Govt anexure-1)
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:
15622 (thickness to be specified by the manufacturer), of approved make,
in all colours, shades except burgundy, bottle gre...
Providing and fixing M.S. grills of required pattern in frames of win - dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to op...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, wit...
Providing and fixing in position fully panelled Honne wood shutters for
doors with , stiles and rails of 35mm. thick with bottom and lock rails
180mm wide top rail and stiles 100mm wide as per drawing...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...
Providing and fixing factory made Green certified, Anti Termite, UV resistant,
high water absorbant single extruded WPC (Wood PolymerComposite) solid
plain flush door shutter of required size comprisi...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete 125x70x4 mm (ordinary type)etc complete as per specifications and as per directions o...
Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. completeetc complete as per specifications and as per dir...
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 ...
Providing and fixing aluminium tubular handle bar 32 mm outer dia,3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.: Anodized (AC 15 ) aluminium tubular ...
Providing and fixing 150 mm bright finished floor brass door stopper
with rubber cushion, necessary brass screws etc. to suit shutter thickness complete as per the direction of Engineer-in-charge.etc ...
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10mmetc complete as per specifications and as per directions of the Engineer-in-Charge.
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer a...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer a...
Painting on Wood Surfaces-Providing and applying two coats of ready mix paint of approved brand on wood surface after thorough cleaning of surface to give an even shade-First Flooretc complete as per...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cl...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cl...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cl...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal sibility for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal sibility for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal sibility for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet a...
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.l. grating brick masonry chamber l00mm x l00mm size P type with Non Modular common burnt clay bricks of designation 3.S& ...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal e...
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :White solid plastic seat with lidetc complete as per specifications and as per directions of the Engineer-in-Charg...
Providing and fixing 100 mm sand cast Iron grating for gully trap.etc complete as per specifications and as per directions of the Engineer-in-Charge.
Providing and fixing 600x450 mm beveled edge mirror of superior glass
(of approved quality) complete with 6 mm thick hard board ground fixed
to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing brass stop cock of approved quality :20 mm nominal boreetc complete as per specifications and as per directions of the Engineer-in-Charge.
Providing and fixing brass bib cock of approved quality :20 mm nominal boreetc complete as per specifications and as per directions of the Engineer-in-Charge.
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :25 mm nominal boreetc complete as per specifications and as per directions of the Engineer-in-Charge.
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 600X850 mm internal ...
Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories completeetc complete as per specifications and as per directions of the Engineer-in...
Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.upto 50 mm conduit in brick wall
Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using N...
Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using N...
Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using N...
Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using N...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...
Supplying and fixing sheet Metal box made out of 18 SWG sheet
metal with necessary holes for cable/conduit entry as required with one
coat of primer of approved make etc.75 x 75 x 65 mm
etc complete ...
Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.100 x 75 x 65 mm
etc complete...
Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.180 x 90 x 65 mmetc complete a...
Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.200 x 90 x 65 mmetc complete a...
Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.135 x 160 x 65 metc complete a...
Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.200 x 200 x 65 mmetc complete ...
Supplying and fixing PVC/metal conduit Deep junction box 19/20 mm deep Junction boxetc complete as per specifications and as per directions of the Engineer-in-Charge.
Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction boxetc complete as per specifications and as per directions of the Engineer-in-Charge.
Supplying and fixing PVC/metal conduit Deep junction box 32 mm deep Junction boxetc complete as per specifications and as per directions of the Engineer-in-Charge.
Supplying And Fixing M.S. Rafter Clamp Set made out of M.S.Flat & 14 mm M.S. rod.etc complete as per specifications and as per directions of the Engineer-in-Charge.
Supplying And Fixing Metal Fan Box with Round Hooketc complete as per specifications and as per directions of the Engineer-in-Charge.
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switchetc complete as per specifications and as per directions of ...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Two Way Switchetc complete as per specifications and as per directions of ...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socketetc complete as per specifications and as per directions o...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Moduleetc complete as per specifications and as per...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.16A One Way Switchetc complete as per specifications and as per directions of...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Bell Pushetc complete as per specifications and as per directions of the E...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socketetc complete as per specifications and as per direction...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.TV/Telephone Socketetc complete as per specifications and as per directions o...
Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz AC supply &completely wired on existing boxetc complete as per specifications and as per d...
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Batten Holderetc complete as per specifications and as per directions of the Engineer-in-Charge.
Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.etc complete as per specifications and as per directions ...
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated volta e 220 V/50 Hz, Rated power upto...
Supplying and fixing of slim box fitting, made out of CRCA Sheet
metal body with locking type holder completely wired. Excluding
Ballast & Fluorescent Tube 1 x 2' Tube light fitting.etc complete as pe...
Supplying and fixing of slim box fitting, made out of CRCA Sheet metal body with locking type holder completely wired. Excluding Ballast & Fluorescent Tube 1 x 4' Tube light fitting.etc complete as pe...
Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has ...
Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector has sw...
Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degr...
Supplying and fixing regular MCCB distribution Panel confirming to
IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum
IP43 protection provided with Polyurethane (PUR) gasket, with
Supplying & fixing miniature circuit breakers on existing MCB
distribution boards using necessary fixing materials and 'C' Type
curve, indicator ON/OFF, energy cross-3 with Short circuit breaking
Supplying & fixing miniature circuit breakers on existing MCB
distribution boards using necessary fixing materials and 'C' Type
curve, indicator ON/OFF, energy cross-3 with Short circuit breaking
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...
Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...
Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water ...
Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired.etc co...
Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/ ISO 8528 I 1002/ISO 3...
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking to the approp...
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking to the approp...
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engi...
Providing and laying red oxide flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete and top layer of 10mm thick plaster with 1:3 cement mortar mixed with red oxide finished wit...
Providing and laying red oxide flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete and top layer of 10mm thick plaster with 1:3 cement mortar mixed with red oxide finished wit...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer a...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer a...
Providing and fixing M.S. grills of required pattern in frames of win - dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to op...
Providing and fixing M.S. grills of required pattern in frames of win - dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to op...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...
Earth work excavation by manual means for drains, canals, waste weir draft, approach channels, key trench, foundation of Buildings & Bridges and such similar works in all kinds of soils , as per drawi...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed raded coarse aggregates and fine aggregates as per relevant IS ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
FabricationSupplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding j...
Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 55...
Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. 300 x 300 x ...
Painting two coats after filling the surface with synthetic
enamel paint in all shades on new plastered concrete surfacetc complete as per specifications and as per directions of the Engineer-in-Charg...
Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material to th...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) etc complete as per specifications and as per directions of the...
Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)etc complete as per specifications and as per directions of the ...
Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) etc complete as per specifications and as per directions of the...
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
50.00 to 100.00 Mtretc complete as per specifications and as per directions of the Engineer-in-Charge.
100.00 to 150.00 Mtretc complete as per specifications and as per directions of the Engineer-in-Charge.
150.00 to 200.00 Mtretc complete as per specifications and as per directions of the Engineer-in-Charge.
200.00 to 250.00 Mtretc complete as per specifications and as per directions of the Engineer-in-Charge.
250.00 to 300.00 Mtretc complete as per specifications and as per directions of the Engineer-in-Charge.
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...
Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgi...
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments. Size 50 mm (SR 2023-24 Volume-5 P.No 154 Sl.No 13.25.1)etc compl...
Supply and delivery at site wrought middle steel (galvanized) GI union confirming to IS 1239-II, 1991 with latest amendments if any. For 50 mm dia GI Union etc complete as per specifications and as pe...
Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for: For 50 mm dia GI elbow etc complete as per specifications and a...
Supply and delivery at site wrought middle steel (galvanized) GI hexagonal nipple confirming to IS 1239-II, 1991 with latest amendments if any. For 50 mm dia GI hexagonal nippleetc complete as per spe...
Supplying and fixing 20" x 20" x 2.5" polished wood board made of not less than 15mm thick plank on both the sides with planks made out of not more than 2 pieces and fixing the same to the wall using ...
Supplying and fixing miniature circuit breakers on existing MCB distribution board using necessary fixing materials and 'C' type curve indicator ON/OFF energy cross-3 with short circuit breaking capac...
Supplying of TPST with rewirable porcelain channels in SM encloser made out of 14 SWG powder coated point of approved colour 32 amps etc complete as per specifications and as per directions of the En...
Supplying and fixing LED type panel board indicating lamp with required colour suitable for 220 V AC 50 HZ 12/24 V DC. etc complete as per specifications and as per directions of the Engineer-in-Charg...
Suppling fully automatic star delta starter unit push button type with suitable wires 2 conductors and adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400/44...
Supplying and fixing single phase preventer using necessary wires over an existing panel board suitable for motar up to 20 HP capacities etc complete as per specifications and as per directions of th...
Supplying fixing and wiring heavy duty low voltage capacitors conforming to IS 2834 phase 400/440 volts grade, for power factor improvement of rotating machinery. etc complete as per specifications an...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C cotouts and other equipments on the meter board using 40mm dia 2.90 thick GI pipe 2.5 mtr long buried in a pit… The pit should ...
Supplying and fixing porcelain fuse channel with cut out on the existing wooden block and wiring complete 63 amps etc complete as per specifications and as per directions of the Engineer-in-Charge.
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 65 mm nominal boreetc complete as per specifications and as per directions of the Engineer-in-Charge.
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 13 over existing cement conc...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Water purification plants: Supplying, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per t...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Mate...
Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approveshape and colour, laid i...
Providing and fixing pre cast solid cement concrete kerb stones made out of M20 with top and bottom width 114 and 165 mm respectively 400mm in length finished with CM 1:3 Plastering and finishing cut...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and fixing 25 mm dia 2.50 m long cold twisted defomed steel anchor rod with 1.25 m length driven into 38 mm dia hole drilled in bed rock and remaining length embedded in concrete / masonry i...
Providing ,Supplying and fixing M.S. gates of Suitable size with required number of M.S. plate , stiffners, and horizontal bracing of ISMC 7540 including rubber guard of ISA 204 of approved quality to...
Supply and erection of 14 Feet Height Street Light Pole 14 Feet Height Street Light Pole on suitable cement concrete foundation with 2.5 Feet height dia 95 mm cast iron decorative round pedestal as pe...
Design, supplying, erecting testing and commissioning of - Passenger/ Bed-cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine ...
Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...
Cost of Haulage Excluding Loading and Unloading Taking output 25t load and lead 10km=250 t.km etc complete as per specifications and as per directions of the Engineer-in-Charge.
Supplying of 1.3 M.P Hikvision/Reputed CCTV Camera (Approved Data Rate)etc complete as per specifications and as per directions of the Engineer-in-Charge.
Supplying of Hikvision 8 Channel NVR(NVR Default without HDD)(Approved Data Rate)etc complete as per specifications and as per directions of the Engineer-in-Charge.
Supplying of 2TB Hard Disk Make: Seagate (Approved Data Rate)etc complete as per specifications and as per directions of the Engineer-in-Charge.
Supplying of 4+4 Pole switch TP Link (Approved Data Rate)etc complete as per specifications and as per directions of the Engineer-in-Charge.
Supplying of 4 pin Spike pin Cona/Reputed (Approved Data Rate)etc complete as per specifications and as per directions of the Engineer-in-Charge.
Supplying of outdoor Supportable CAD6/CADS Cable (Approved Data Rate)etc complete as per specifications and as per directions of the Engineer-in-Charge.
Supplying of Hardware items and fixing charges (Approved Data Rate)etc complete as per specifications and as per directions of the Engineer-in-Charge.
Installation charges for camera and NVR (Approved Data Rate)etc complete as per specifications and as per directions of the Engineer-in-Charge.
IP Configuration (Approved Data Rate)etc complete as per specifications and as per directions of the Engineer-in-Charge.
Supplying of 42" LED TV Make: Samsung/LG/Philips/Videocon (Approved Data Rate) etc complete as per specifications and as per directions of the Engineer-in-Charge.
Supply and fixing of children Play Equipment Maxima N Swing:
Inverted U shaped structural posts of height 2.31 m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm (wall) thickness ...
Supply and fixing of children Play Equipment Monkey Bars - E:
Support posts of height 2.15 m are to be schedule Galvanized steel with a 114 mm OD (Outer Diameter). All the posts are to be finished wit...
Supply and fixing of childern Play Equipment Two seater seesaw: The See Saw consists of 2 poles of Dia 114mm and thickness of 2.5mm which balances the horizontal rod at the 17 center which is of size ...
Supply and fixing of childern Play Equipment Puppy dog Rider / Elephant rider / Horse rider :: HDPE of size 0.83 mx 0.31 mx 0.87 m, Plastic Components [super thick plastic] shall be rotationally molde...
Supply and fixing of children Play Equipment Merry go round - DX: The Merry go round consists of a round platform which is made of galvanized steel and has a thickness of 2.5 mm. It is also power coat...
Providing and suppiying of School Bench of 1.2m Length. Green Ply top with
laminated Colour. MS Frame of size 25mm (Powder Coated). (Excluding GST) etc complete as per specifications and as per dir...
Providing and supplying of School Bench of 1.8m Length, Green Ply top with
laminated Colour. MS Frame of size 25mm (Powder Coated). (Excluding GST) etc complete as per specifications and as per dir...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing Aluminium Turbo ventilator complete as per technical
specifications Non Power Driven with 1.3mm thickness and 38 No.s of Vanes & turbine doom
thickness 1mm and total weight not le...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as perspe...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...
Providing, supplying and fixing of Treadmill of Heavy duty commercial product of Dimensions (L x W x H) 69 x 36 x 62’ (1.75m x 0.9m x 1.5m), Motor 8 HP, Maximum user weight 220 Kgs. Incline level...
Providing, Supplying and fixing of Cross Trainer of Dimensions (L x W x H) - 1900 x 750 x 1800 mm (75" x 30" x 71"), Step up height 5.9 inches, Maximum user weight 180 Kgs, Incline levels 0 to 15, S...
Providing, Supplying and fixing of Exercise Bike of Heavy duty commercial product, beauty in design. Dimensions (L x W x H): 1640 x 600 x 1320 mm (65” x 24” x 52”), Weight 80 Kg, Max user weight...
Provinding, Supplying and fixing of Group Cycle of Dimensions (LxWxH) 1138 x 589 x 1140 mm (45” x 23” x 45”) and 170 mm (6.7 in) space between the pedals, Durable, scratch-resistant stretching ...
Providing, Supplying and fixing of Chest Press machine with Machine weight 283 Kgs & stack weight 130 Kgs, Length: Width: Height: 1350 mm, 1450 mm, 1690 mm, Bio motion, Bio seat, Optimal Grip, Physi...
Providing, Supplying and Fixing of Shoulder Press Machine with Machine weight 216Kgs & stack weight 95Kgs. Dimensions (LxWxH): 980 mm x 1406mm x 1485mm, comprises of Bio motion, Bio seat, Optimal Gr...
Providing, Supplying and Fixing of Leg Extension machine of Dimensions (L x W x H): 1300 mm x 1050 mm x 1485 mm, Machine weight 263 Kgs & stack weight 125 Kgs, including Bottle, mobile & Towel holder...
Providing, Supplying and fixing of Leg Press machine of Dimension (L x W x H): 2068 mm x 1206 mm x 1800 mm, Machine weight 581 Kgs & stack weight 250 Kgs, Reinforced area for calf exercises. 20 degr...
Providing, supplying and fixing of Cable Crossover Machine of Dimension: (L x W x H): 3729mm x 749mm x 2398mm, Machine Weight of 335 kgs, with two adjustable pulleys to accommodate countless excercis...
Providing and supplying of Adjustable Bench of Dimension (L x W x H) 1198mm x 697mm x 1312mm, with 7 backrest angle settings 0, 15, 30, 45, 60, 75, 85 and 3 seat angle settings 0, 15, 30. (Excluding G...
Providing, supplying and fixing of Vertical Dumbbell Rack of Size (L x W x H): 923mm x 888mm x 1345mm, weight 72kg, 3 mm thick frame, powder coated. (Excluding GST) etc complete as per the specificat...
Providing and supplying of heavy duty rubber Dumbbell of 2 kg Weight, with Steel Handle. (Excluding GST) etc complete as per the specification and directions of Engineer incharge etc complete as per ...
Providing and supplying of heavy duty rubber Dumbbell of 4 kg Weight, with Steel Handle. (Excluding GST) etc complete as per the specification and directions of Engineer incharge etc complete as per ...
Providing and supplying of heavy duty rubber Dumbbell of 6 kg Weight, with Steel Handle. (Excluding GST) etc complete as per the specification and directions of Engineer incharge etc complete as per ...
Providing and supplying of heavy duty rubber Dumbbell of 8 kg Weight, with Steel Handle. (Excluding GST) etc complete as per the specification and directions of Engineer incharge etc complete as per ...
Providing and supplying of heavy duty rubber Dumbbell of 10kg Weight, with Steel Handle. (Excluding GST) etc complete as per the specification and directions of Engineer incharge etc complete as per...
Providing and supplying of heavy duty rubber Dumbbell of 12 kg Weight, with Steel Handle. (Excluding GST) etc complete as per the specification and directions of Engineer incharge etc complete as per...
Providing and supplying of heavy duty rubber Dumbbell of 14 kg Weight, with Steel Handle. (Excluding GST) etc complete as per the specification and directions of Engineer incharge etc complete as per ...
Providing and supplying of heavy duty rubber Dumbbell of 16 kg Weight, with Steel Handle. (Excluding GST) etc complete as per the specification and directions of Engineer incharge etc complete as per...
Providing and supplying of heavy duty rubber Dumbbell of 18 kg Weight, with Steel Handle. (Excluding GST) etc complete as per the specification and directions of Engineer incharge etc complete as per ...
Providing and supplying of heavy duty rubber Dumbbell of 20 kg Weight, with Steel Handle, (Excluding GST) etc complete as per the specification and directions of Engineer incharge etc complete as per ...
Providing and supplying of Urethane Plates of weight of 2.5kg, made of a cast iron center encased in a urethane shroud. (Excluding GST) etc complete as per the specification and directions of Enginee...
Providing and supplying of Urethane Plates of weight of 5kg, made of a cast iron center encased in a urethane shroud. (Excluding GST) etc complete as per the specification and directions of Engineer ...
Providing and supplying of Urethane Plates of weight of 10kg, made of a cast iron center encased in a urethane shroud. (Excluding GST) etc complete as per the specification and directions of Engineer...
Providing and supplying of Urethane Plates of weight of 20kg, made of a cast iron center encased in a urethane shroud. (Excluding GST) etc complete as per the specification and directions of Engineer...
Providing and supplying of Set Tricep Cord cod. (Excluding GST) etc complete as per the specification and directions of Engineer incharge etc complete as per specifications and as per directions of th...
Providing and supplying of Power pack DAP. (Excluding GST) etc complete as per the specification and directions of Engineer incharge etc complete as per specifications and as per directions of the Eng...
Providing and supplying of RUBBER BAR FOR LAT MACHINE. (Excluding GST) etc complete as per the specification and directions of Engineer incharge etc complete as per specifications and as per direction...
Providing and supplying of Traction triangle. (Excluding GST) etc complete as per the specification and directions of Engineer incharge etc complete as per specifications and as per directions of the ...
Providing and supplying of TRAZIBAR CROMATO. (Excluding GST) etc complete as per the specification and directions of Engineer incharge etc complete as per specifications and as per directions of the E...
Providing and supplying of PLASTIC HANDLE. (Excluding GST) etc complete as per the specification and directions of Engineer incharge etc complete as per specifications and as per directions of the Eng...
Providing and supplying of LEATHER ANKLE STRAP. (Excluding GST)etc complete as per specifications and as per directions of the Engineer-in-Charge.
Providing and supplying of EXERCISE MAT. (Excluding GST) etc complete as per the specification and directions of Engineer incharge etc complete as per specifications and as per directions of the Engin...
Providing and supplying of WELLNESS BALL PROF 65cm. (Excluding GST) etc complete as per the specification and directions of Engineer incharge etc complete as per specifications and as per directions o...
Adv login Upgrade A0001369 etc complete as per the specification and directions of Engineer incharge etc complete as per specifications and as per directions of the Engineer-in-Charge.
Providing, Supplying and fixing of Lat machine, of Size (L x W x H) 1220mm x 845mm x 2285mm, Machine weight 212 Kgs & stack weight 130 Kgs. Including Bottle, mobile & Towel holder for comfort, Roller ...
Providing, Supplying and fixing of Pulley Machine of size: (L x W x H) 1802mm x 1360mm x 1800mm, machine weight of 324kgs stack weight 125 Kgs, including mini console for connectivity for bio feedba...
Providing, Supplying and fixing of Olympic Incline Bench of size: (L x W x H) 844mm x 1254mm x 1604mm, machine weight of 103kg, with user footplate and Spotter Platform. (Excluding GST) etc complete a...
Providing, Supplying and fixing of Olympic Flat Bench of size: (L x W x H) 1645mm x 1254mm x 1358mm, machine weight of 109kg, with user two footplate featuring magnetic locking system & spring etc co...
Providing, Supplying and fixing of Olympic Decline Bench of size: (L x W x H) 1894mm x 1244mm x 1523mm, machine weight of 108kg, with Adjustable Roll-Pad system and Stop Hooks. (Excluding GST) etc com...
Providing and Supplying of OLYMPIC BENCH WEIGHT STORAGE (Excluding GST) etc complete as per the specification and directions of Engineer incharge etc complete as per specifications and as per directio...
Providing and Supplying of Olympic power bar of length: 2200mm, 50mm sleeve dia and weight of 20kg, (Excluding GST) etc complete as per the specification and directions of Engineer incharge etc comple...
Providing and Supplying of barbell of length: 2010mm, 50mm sleeve dia and weight of 10kg, (Excluding GST) etc complete as per the specification and directions of Engineer incharge etc complete as per ...
Providing and Supplying of barbell of length: 1500mm, 50mm sleeve dia and weight of 7.5kg , (Excluding GST) etc complete as per the specification and directions of Engineer incharge etc complete as pe...
Providing and Supplying of Curl bar of length: 1205mm, 50mm sleeve dia and weight of 9kg, (Excluding GST) etc complete as per the specification and directions of Engineer incharge etc complete as per ...
Removing and resetting of footpath slab etc complete as per specifications and as per directions of the Engineer-in-Charge.
Removing and resetting stone slabs of drains and pointing in C.M (1:3)etc complete as per specifications and as per directions of the Engineer-in-Charge.
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and Fixing pre cast Covering Slab 230mm thick made out of M20 and jelly 20mm Down size with steel reinforcement including form work,curing, including cost of all materials, labour, hire c...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Removing and resetting of Kerb Stones etc complete as per specifications and as per directions of the Engineer-in-Charge.
Providing and fixing pre cast solid cement concrete kerb stones made out of M20 with top and bottom width 114 and 165 mm respectively, 400mm high and 450mm in length finished with CM 1:3 plastering an...
Removing & Resetting existing Heavy Duty Pavers of thickness 60/75/80/100mm using Cement and 40mm thick sand bed ( average thickness ) and compacting with plate vibrator to achieve final desired compa...
Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead etc complete as per spec...
Providing and applying Primer Coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90 kg per m2 using mecha...
Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.5 per cent by weight of total...
Providing and applying Tack Coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on the prepared bituminous surface cleaned with mechanical broom MORTH Speci...
Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 5.4 percent of mix and filler, tr...
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC...
Loading and Unloading of Stone Boulder/Stone aggregates/Sand/ Kankar/Moorum. (Tipper 14 m3 ) etc complete as per specifications and as per directions of the Engineer-in-Charge.
Site Clearance Cuttting and Clearing thin jungle including removal of roots with a initial lead of 50m and life of 1.5m and General Cleaning Removal of dried leaves,solid waste and cleaning of the are...
Scraping and Removing of Top Soil) a. Cleaning the site by scraping and Removing Top layer of Soil.removing unwanted debries grass,along with excavated earth to a distance of 500m from the spot includ...
14.Supplying of Red soil (New Earth Filling):Supplying of Good quality Red soil for Gardening and Growing of plants shrubs etc.,including the %weightage given to B.B.M.P.areaetc complete as per specif...
Shrubs in Groups: Developing the area of Shrubs by digging of pits of size 0.45m and Filling up to 50% of the pits top excavated soil and Remaining 50% withmixture of sand (0.0375cum),Fym(0.075cum),R...
Palnting of Shrubs ( b) Cost of the plant(8 plants per sqm) (Including Transportation and Handling charges)etc complete as per specifications and as per directions of the Engineer-in-Charge.
Digging pits size 0.75m x 0.75m x 0.75 filling up to 50% the pits with top excavated soil and remaining 50% with sand, Fym, Red earth (0,021 Cum) (i.e. in the proportion of 1:2:3) and planting of Fic...
Digging pits size 0.75m x 0.75m x 0.75 filling up to 50% the pits with top excavated soil and remaining 50% with sand, Fym, Red earth (0,021 Cum) (i.e. in the proportion of 1:2:3) and planting of Plum...
Digging pits size 0.75m * 0.75m * 0.75 filling up to 50% the pits with top excavated soil and remaining 50% with sand, Fym, Red earth (0,021 Cum) (i.e. in the proportion of 1:2:3) and planting of Cyca...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW04p4.pdf
Tender Document • 2.81 MB
tender notification ee-sjn-tend-222025-26.doc
Others - Notification • 0.08 MB
tender notification ee-sjn-tend-242025-26.doc
Others - Notification • 0.08 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .