SPECIAL REPAIR TO ROAD IN TRG BN AREA, ADM BN AREA, INTERNAL ROAD ALONGWITH PATH, SUNDER ENCLAVE AND NAGDA ENCLAVE OF JAK RRC UNDER GE (W) JABALPUR

Amount

Scarifying or picking graveled, macadam or bituminous macadam surface in area not exc 400 sqmm and depth exc 50 mm but not exc 100 mm by using mechanical scarify including racking over and grading the broken -up surfaces to the proper chamber or removing to a distance not exc 50 m from the starting point and stacking complete all as specified and as directed.

Preparing existing black top surfaces by brushing with wire brushes for removing cake mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and as directed.

Preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for re-moving caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a prime coat of Cationic Bitumen Emulsion SS1 conforming to IS: 8887 at a rate of application of 0. 70 -1.00 kg/sqm on surface of WBM/WMM as specified in Table 500-5 of MoRTH specification using mechanical sprayer complete all as specified and as directed

M&L for bituminous premixed asphaltic semi dense concrete 30mm consolidated thickness with minimum 5.50 % binder content using paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient using 8 to 12 tonne tandem vibratory roller complete all as specified and directed. Notes:- (i) Bituminous premixed asphaltic semi dense concrete shall be prepared in hot mix plant only. (ii) Bituminous premixed asphaltic semi dense concrete shall be laid with sensor paver only. (iii) Binder content shall be tested at site as directed by Engr-in-Charge.

Blank

M&L for applying evenly a priming/ tack coat of Cationic bituminous emulsion RS1 confirming to IS : 8887 at a rate of application of 0.2 - 0.30 kg / Sqm by using mechanical sprayer on the bituminus surface of road, as specified in table 500-3 of MoRTH specification after cleaning the existing surface, complete all as specified

M&L for premixed bituminous macadam for consolidated thickness upto 75mm or less with using 19mm graded (Grading 2) stone aggregate with minimum 4.0% binder content using paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient using 8 to 12 tonne tandem vibratory roller complete all as specified and directed. Notes:- (i) Premixed bituminous macadam shall be prepared in hot mix plant only. (ii) Premixed bituminous macadam shall be laid with sensor paver only. (iii) Binder content shall be tested at site as directed by Engr-in-Charge.

M&L for preparation of existing bituminous road surfaces by removing dust, dirt grease and other foreign matters etc and after prepration of road surfaces, applying road marking having minimum 2.5 mm average thickness with & including thermo plastic (Reflective) line marker paint/ compound of uniform surface finish conforming to BS 3262 (Part-I) 1989 read in conjunction with the MORTH specification 803 clause 4.2.2 on bituminous surfaces in white/ yellow colour and super imposed with glass beads conforming to BS 6088 read in conjuction with the MOST specification 803 clause 4.3.3 complete all as specified and directed. Make of Road Marker Paint/ Compound:- Asian or Thermoline as approved by GE. Notes:- (i) MORTH specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by GE. (ii) Shape, size & pattern of marking shall be as approved by GE.

M&L for repair to poteholes, any depth, not exc 1.0 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by applying evenly a priming/ tack coat of bituminous primer with paving bitumen VG-30 @ 5 Kg/ 10Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder i.e. paving bitumen VG-30 @ 9.80Kg/ 10Sqm, blinded with 0.09 Cum of stone chippings of 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of pot holes exc 30mm complete all as specified and directed.

Supply and fix in repairs cats eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instruction and to be fixed with Epoxy- Resin based adhesive or Special Hot Melt Bitumen adhesive avoiding nails etc complete all as specified and directed. Make: 3M 290 Series of Road Star or equivalent Model of make- Dark Eye or Green Lite or Sun Lite as approved by GE.

Supply and fix solar cat's eye/ studs of size 125mmx 125mmx 25mm (shank 60mm) with aluminium alloy shell, high efficiency Mono-Crystalline Solar Panel 2.40V/ 0.30Watt having one Ni-Mh or NI-cd rechargable battery (1.2V/ 1600MA), Six Super Bright LEDs with 10,000 to 18,000 mcd (Millicandela) having flash rate 2 Hz and bearable weight 10 tons approx with view distance upto 1000 meters of any colour i.e yellow, red, blue, green or white as required at site, working temp 10o-75o C, working time 3 to 4 days after fully charged battery, charging time 5 to 6 hours from direct sun light, maintenance free, un-breakable poly carbonate clear facing, automatically turns on at night and turns off at dawn including all fixing arrangment as per manufactures instructions complete all as specified and directed. Make: DA 110 (DHRUV) of DARK EYE or equivalent Model of make- Road Star or Green Lite or Sun Lite as approved by GE.

Supply and fix, in repair, polycarbonate reflective convex mirror of size 800 mm dia made of ABS/ fiber/ plastic body with upper collar complete with mounting hardware i.e. necessary clamps & nut bolts etc mounted on and including 65mm dia MS pipe having 2.0M length duly painted with and including two coats of synthetic enamel paint as approved by GE over a coat of red oxide primer and fixed on the ground after necessary excavation and earth work in any type of soil, embeding the delineators on the ground with & including PCC (1:2:4) type B1 using 20mm graded stone aggregate (minimum PCC block size 200mmx 200mmx 200mm for proper grouting) complete all as specified and directed. Make of Convex Mirror:- RSCM-100 of Road Star or equivalent Model of make- Green Lite or Dark Eye or Sun Lite as approved by GE.

Supply and fixing metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strip with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150 x 150 x 300 mm) type B-1 complete all as specified and directed.

M&L for moorum/ red bajri, spread, rolled and consolidated to gradient and camber as required complete all specified and directed. Note:- (i) Compacted thickness shall be measured and paid. Note:- (i) Compacted thickness shall be measured and paid. (ii) Rolling/ compaction shall be done by vibromax roller only.

Demolition of precast cement article, built in cement mortar including all quoins, arches, pillars etc, but including ashiar facings, dressed stonework and precast concrete articles all complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thick above or below ground level and removal of entire debris as ordered outside MD land complete all as directed.l).

M&L for 75mm thick PCC (1:4:8) type D2, using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.

M&L for 60 mm thick rubber moulded reflective surface PU coated, factory made, coloured, Machine pressed precast concrete interlocking paver blocks/ tiles conforming to IS 15658-2006, M-35 designation of concrete as approved by GE, in hard standing, laid dry over & including 50mm thick sand cushion including watering and consolidation and filling the voids of paver blocks/tiles with dry sand complete all as specified & directed.

M&L for 80 mm thick rubber moulded reflective surface PU coated, factory made, coloured, Machine pressed precast concrete interlocking paver blocks/ tiles conforming to IS 15658-2006, M-35 designation of concrete as approved by GE, in hard standing, laid dry over & including 50mm thick sand cushion including watering and consolidation and filling the voids of paver blocks/tiles with dry sand complete all as specified & directed.

Material and labour at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required in line, level and curvature, jointed with cement mortar 1:3 (1 cement 3 coarse sand) including making joints with or without grooves (thickness of joints except at shap curve shall not to more than 5 mm) including making drainage opening wherever required complete.

M & L for cleaning , rubbing and preparing old /new surface for 2 coat of modified choloro rubber based making paint with lightfast pigment with good drying and whether resistance properly with coverage 9.5-11.5 sqm/lit on concrete karb stone on pathways with colour ( yellow/white reflectorized pain and black non reflectorized pain) confirming to BS 1340:2012 with special applicator machine all as per manufacturers instruction complete all as specified and directed by Eng-in-Charge.

S & F in repair balusters omamental type round hollow rolled mild steel ( framed) grade Fe 410-W (Gde-E-250) quality A Fe on road side path with 10 mm dia GI interlink chain in between poles connected to pole including etc including cleate, brackets, factory painting and complete installing to ground etc complete all as specified and directed by Eng-in-Charge.

S & F in repair rubber speed breaker size 500 x 350 x 50 mm with wt 8-12 Kg/unit made of EPDM including reflective stripes for night visibility complete uv resistant with weight bearing capacity upto 20 tons in approved colour applicable to any type of road surface including all necessary fitting and fixture to surface complete all as specified and directed.

Schedule of credit amount of Rs 1150.00 to be deducted during AOC

J.P ENTERPRISES (BID ID -3461709)

Mahaveer Engineering Co. (BID ID -3461605)

Deepesh Electricals (BID ID -3459142)

POONAM ELECTRIC INDUSTRY (BID ID -3461504)

Tiki Water proofing Co (BID ID -3461147)

JAIDEV SINGH CHADHA (BID ID -3461162)