Construction of 2 MGD SPS and allied works at Gandhi Vihar Resettlement Colony in Adarsh Nagar AC-4. NIT No. 11 (Re-Loaded)

Amount

MECHANICAL WORKS

A) SITC of Sewage Submersible Pumps and allied delivery & header line including following: 1. Non Clog Sewage Submersible Pump having Discharge 380 cum/hour, head 21 meter, working voltage 415 ± 10 %, 3 phase, 50 Hz ± 5%, A/C supply having 1450 RPM, S.S. Impeller, S.S. Shaft, Solid Handling 100 mm, along with 15 meter power and control cable with following accessories Ø Duckfoot Bend with Guide Pipe & Installation Kit Ø Guide Pipe (MS Galvanised) Dual Rail System suitable for depth of 6.5 meter Ø 6 Meter Lifting chain (MS Galvanised) Ø Control Panel for the Submersible Pump

200 mm dia MS Pipe made out from 8 mm thick MS Sheet. Make: Tata / Jindal

350 mm dia MS Pipe made out from 8 mm thick MS Sheet. Make: Tata / Jindal

10 mm thick MS Flanges for 200 mm dia MS Pipe. Make: Tata / Jindal

12 mm thick MS Flanges for 350 mm dia MS Pipe. Make: Tata / Jindal

200 mm dia bends 90 degree MS C Class Bend. Make: Tata / Jindal

MS Reducer of size 350 mm - 200 mm dia made out from 10 mm thick MS Sheet. Make: Tata / Jindal

NRV of size 200 mm, PN 1.0 Make :- Kirloskar / IVC / Other DJB Approved make

Non rising Sluice valve of size 200 mm, PN 1.0 Make :- Kirloskar / IVC / Other DJB Approved make

Non rising Sluice valve of size 350 mm, PN 1.0 Make :- Kirloskar / IVC / Other DJB Approved make

M.S. Nut bolts washer. DSR 2018: Item Code1034

Supply of 200 x 75 mm size MS Channel for providing supports to the Sluice Valve, NRV & delivery lines of the submersible pumps etc. DSR 2018: Item Code2815

Fabrication and installation of 250 x 125 mm MS I-Beams for 2 Ton Capacity Electric Hoist over the wet sump for lowering & removing of the Submersible Pumps from the well. DSR 2018: Item Code2815

Supply & installation of 2 Ton capacity EOT Crane with 15 meter lift of height Make: Globe / Idef/ Other DJB Approved make

Supply & fixing of Pressure gauge having range 0 - 28 kg/cm2 and 150 mm dial size. Make: H Guru

B) SITC of multi rack automatic coarse bar screen (MOC SS316) suitable for 4 meter channel depth with 30 mm bar spacing. The work also includes SITC of conveyor belt along with ultrasonic level sensor & control panel. Make: Jash / Jonson / DJB approved make

ELECTRICAL WORKS Supply and fixing of the LT Panel as per the details given below:

Fabrication / Supply of LT Panel Board cubical type, floor mounting, dust & vermin proof construction, of the minimum size 3 square meter of face area & more than 0.6 meter depth, suitable for indoor fixing, made out of 16 SWG CRCA sheet along with neutral link, having chambers suitable to switchgears to be fitted as below with provisions for cable entry from bottom. The panel should have separate cable alleys and bus bar alleys and base frame of suitable size. The rating of main bus bars has to be 400 Ampere in Aluminium construction duly sleeved with phase indicating heat shrinkable Sleeves to be fixed at top Bus Bar Chamber. It should be complete in all respect along with painted through powder coating process having 01 incomer, 3 Static Capacitors for 50 HP Load, and 9 outgoing Chambers and all the switchgears as below duly fitted with complete interconnections with the main bus bars through Aluminium bus bars of suitable size. All the metering chambers duly complete with all instruments as below duly fitted with complete wiring through PVC insulated copper cable with all the accessories, thimbles, ferrules etc. complete in all respect as per requirement.

400 Amp, 50 KA, 3 Pole MCCB with thermal magnetic release & spreader terminals. Make: GE / L&T / BCH/ Schneider / C&S

200 Amp, 50 KA, 3 Pole MCCB with thermal magnetic release & spreader terminals. Make: GE / L&T / BCH/ Schneider / C&S

63 Amp, 25 KA, 3 Pole MCCB with thermal magnetic release & spreader terminals. Make: GE / L&T / BCH/ Schneider / C&S

32 Amp, 25 KA, 3 Pole MCCB with thermal magnetic release & spreader terminals. Make: GE / L&T / BCH/ Schneider / C&S

Digital ammeters, 3 digit, AC, 50 Hz, Size 96 mm2, Make: AE / L&T / BCH/ Schneider / C&S

Digital Voltmeters, 3 digit, AC, 50 Hz, Size 96 mm2, Make: AE / L&T / BCH/ Schneider / C&S

Indicating Lamps of Red, Yellow, Green Colour Make: Vaishno/ L&T / BCH / Schneider / C&S

Indicating Lamps of Blue Colour Make: Vaishno/ L&T / BCH / Schneider / C&S

Current Transformer 400/5 ampere. Make: L&T/AE

Current Transformer 200/5 ampere. Make: L&T/AE

25 KVAR Heavy duty Capacitor Round type, rated at 440V, 50 Hz, 3 phase AC complete with terminal cover, discharge device, MCB etc. Make L&T/Scimens/ Standard

Supply & fixing of MS frame made out from 25x25x6 mm size MS Angle Iron, for the LT Panel and installing the LT Panel on frame.

B) SITC of internal lighting system and allied Electrical work by carrying out the following works:

4 feet long, 22/24 W LED Tube Light fittings for wall /Recess (Complete Set ) Make: Osram / Havells / Bajaj

1200 mm dia sweep Ceiling fan. Make: Amonard / Khaitan / Crompton / Havells

380 mm dia, 900 rpm, exhaust fan Make: Amonard / Khaitan / Crompton / Havells

600 mm sweep, Air Circulator wall fan Make: Amonard / Khaitan / Crompton

5) Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. Electrical DSR 2018 : Item No 1.22.5 a) 200 mm X 125 mm X 60 mm deep

b) 250 mm X 300 mm X 100 mm deep

6) Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. Electrical DSR 2018 : Item No 1.23 a) 5/6 Amp Switch

b) 3 pin 5/6 Amp Socket Outlet

c) 15/16 A switch

d) 6 pin 15/16 A socket outlet

7) Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Electrical DSR 2018 : Item No 1.25

8) Wiring for circuit / submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. Electrical DSR 2018 : Item No 1.14 a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

b) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

c) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

9) Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required. DSR Electrical 2018: Item No 5.1

10) Providing and fixing earth bus of 25 mm X 5 mm GI strip on surface for connections etc. as required. DSR Electrical 2018: Item No 5.15

11) Supply of 1 C x 50 sqmm PVC Insulated Copper Cable for outgoing from LT Panel to Starters Make : Grandlay / Polycab / Gloster / National

12) Supply & fixing of 50 sqmm heavy duty copper thimbles

13) 400 Amp, 50 KA, 3 Pole MCCB with thermal magnetic release & spreader terminals. Make: GE / L&T / BCH/ Schneider / C&S

14) Enclosure for 400 Amp, 50 KA, 3P MCCB Make: C&S / GE / L&T / BCH / Siemens

15) Supply of 3.5 C x 300 sqmm Aluminium Armoured Cable for main switch to LT Panel Make : Grandlay / Polycab / Gloster / National

16) Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as Required. Above 95 sq. mm and upto 185 sq. mm DSR E&M 2018 : 7.1.3

17) Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Above 95 sq. mm and upto 185 sq. mm DSR E&M 2018 : 7.6.3

18) Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3 X 185 sq. mm (57mm) DSR E&M 2018 : 9.1.16

C) SITC of external lighting system by carrying out the following works

Conical type of Steel tabular Pole for Street light in 5 meter height.

Erection of metallic pole of following length in cement concrete1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 4.5 metre and upto 6.5 metre DSR-2018 ITEM CODE:- 11.3.1

Supplying and fixing of 32 mm dia X 2.00 meters long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV/LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. DSR-2018 ITEM CODE:- 12.34

60 watt, 5700K, pressure die-cast aluminium IP66 LED street light luminaries. Make: Bajaj / Havells / Crompton / Philips / Wipro

Supply of 45 watt, 5700K, pressure die-cast aluminium IP66 LED street light luminaries. Make: Bajaj / Havells / Crompton / Philips / Wipro

SMC junction boxes anti-corrosive water resistant, UV protected, High temp resistant. Confirming to UL 94 VO standards, ERDA approved, weather able and suitable for all kinds of climatic conditions. Self-colour fire retardant and high dielectric strength maintenance free. Make: Bajaj, Hensel, C&S, Binani, Syntex, ABB/Other DJB approved make

2 core 16 Sq mm armoured aluminium conductor PVC insulated and PVC sheathed/XLPE cable 1.1 KV conforming to IS 1554/1/88 with latest amendment. Make:- Fort Gloster /ICL /ICC /Universal /CCI /Grandly /Any DJB approved Make

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle) DSR-2018 ITEM CODE:- 7.7.1

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as Required. Upto 35 sq. Mm DSR E&M 2018 : 7.1.1

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. Mm DSR E&M 2018 : 7.5.1

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required. DSR Electrical 2018: Item No 5.1

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. Asrequired.DSR Electrical 2018: Item No 5.7

D) SITC of ultrasonic Water level indicator by carrying out the following works

Ultrasonic level measurement sensor for measuring dept upro 15 meters for contactless measurement and having :- Standard Range: 0.6 – 15 meter, measurement accuracy: +/- 25%, Display : LCD (4-7 Segments), Power Supply : 0-28 V DC, Temperature Range : -40 to +70 mA, Enclosure Rating: IP 65/NEEMA 4, Sensor Material : Aluminium (ECTFE) etc. Make : DPM / PSI / Spink

Process Indicator / Controller having 4 relay output, Contact Rating 230 V AC, 1 Amp. The system should be configurable as control outputs on separate set points, with predefined logic with 7 segments LED, 5 digits. Supported by 4 key tack-tile keyboards. Input will be 4-20 mA Linear with resolution 4 ½” digits, The supply will be 230 VAC, 50 Hz & power output of 24 VDC 120mA. Power supply is made available for the external transmitter supply. The approx cabinet size will be 92 x 92 x 110 mm approx. The controller should be capable of giving out alerts through alarms to users if the water level in any of the tanks being monitored crosses the defined threshold value. Provision should also be there to connect to secondary controller for giving the some output at both the place as also provision for connect it to internet cloud if required in future. Make : DPM / PSI / SPINK

3 x 1.5 sqmm Cu power cable between ultrasonic level instrument & the power source. Make: DC

2 x 1.0 sq mm Cu core control cable between ultrasonic level instrument & the process controller. Make: DC

Cover Box – MS Body & Oil pained.

E) Providing & fixing of the following safety items at the SPS:

ABC Powder Type 4 Kg Capacity, ISI Mark, Fire Extinguisher.

Providing of the insulating met for safety of the operational staff. Make: Jyoti / National/ Electromat / Safe Volt

Bidder Name

Amount

AZAD BUILDERS(GSTN-07AAFPO5524NIZC)

ASHISH ASSOCIATES(GSTN-NA)

M/S ULTRA BUILD INFRA PROJECTS(GSTN-NA)

Description of Work / Item(s)

Laying and Jointing PVC Pipe. Heading

Brick work in C.M 1:5 mix including all labour charges etc complete

Brick work in C.M 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete

Plastering in C.M 1:5-12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete

M/S ULTRA BUILD INFRA PROJECTS

AZAD BUILDERS

ASHISH ASSOCIATES

AZAD BUILDERS

M/S ULTRA BUILD INFRA PROJECTS

AZAD BUILDERS