Tender ID

Karnataka

Retender

Works

Buildings

CONSTRUCTION OF ADDITIONAL FOUR CLASSROOMS FOR GOVT. HIGHER PRIMARY SCHOOL AT JAJUR IN CHALLAKERE TALUK, CHITRADURGA DISTRICT

Public Works Department

PWD Division Office Chitradurga | Karnataka

Amount: ₹58.4 LCloses: 7 Jan 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published30 Dec 2024
Closed7 Jan 2025
Retendered30 Dec 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 30 Dec 2024

Tender Value

₹58.4 L

EMD Value

₹1.2 L

Closing Date

7 Jan 2025, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

EE PWD CTA

Office Number

Work Description

CONSTRUCTION OF ADDITIONAL FOUR CLASSROOMS FOR GOVT. HIGHER PRIMARY SCHOOL AT JAJUR IN CHALLAKERE TALUK, CHITRADURGA DISTRICT

Tender Information

Tender ID

PWD/2024-25/BD/WORK_INDENT15327

Reference Number

PWD/2024-25/BD/WORK_INDENT15327

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Chitradurga

Source Website

Subscribe to view

Documents Required

12 documents required · 12 mandatory

Technical Bid

RequiredThe Tenderer should be a KPWD Registered Class-III and above contractor.

RequiredTo qualify for Award of this contract each Tenderer in his name should have in the last five years i.e. 2019-20 to 2023-24 achieved in at least two financial years an average annual financial turnover in all classes of civil engineering construction works only of Rs. 58.44 Lakhs. Balance sheet & Profit & Loss Account indicating contract receipts issued by the competent accountant / Authority with UDIN number

RequiredTo qualify for Award of this contract, each Tenderer in its name should have in the last five years, i.e. 2019-20 to 2023-24 satisfactorily completed as prime contractor, at least one similar work such as Construction of Building work of value not less than Rs 29.22 lakhs.Work done Certificate issued by the competent Authority of rank not less than Executive Engineer

RequiredEach tenderer should further demonstrate liquid assets and/or availability of Credit facilities of not less than Rs. 17.53 Lakhs Credit lines / letter of credit / certificates from banks for meeting the fund requirement etc,.

RequiredThe Tenderer should have executed in any one year in the last five years i.e. 2019-20 to 2023-24 the following minimum quantities of work 1. Earthwork Embankment 183.00 m3 2. PCC RCC 121.00 m3 3. BBM Solid Concrete Blocks 75.00 m3 4. TMT steel 9.41 tonne 5. Plastering 893.00 m2 6. Flooring Granite Vitrified Ceramic 242.00 m2 done Certificate issued by the competent Authority of rank not less than Executive Engineer

RequiredThe E.M.D. as prescribed should be submitted by the Tenderer and In case of Bank Guarante valid for 135 days as prescribed in Karnataka public Procurement portal.

RequiredStatement showing the Existing commitments and ongoing works, in the prescribed proforma as per 1.5 A of Section 3 of Qualification information should be furnished.

RequiredStatement showing Details of works for which tenders are already submitted in the prescribed proformaas per 1.5 B of Section 3 of Qualification information should be furnished.

RequiredStatements/details as per 1.3, 1.4, 1.6, 1.7, 1.8, 1.9, and 1.12 of Section 3 of Qualification information should be furnished.

RequiredThe Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totaling Rs. 1.67 lakhs in any one year & should up load consent letter from the electrical sub-contractor.

RequiredGST Declaration Certificate

RequiredEMD for Rs. 100000.00 shall be paid through KARNATAKA PUBLIC procurement PORTAL KPPP and the Balance of Rs.17000.00 by Bank Guarantee issued by Nationalised or Scheduled Bank. Contractor should upload the scanned Copy of original Bank Guarantee issued by Nationalised or Scheduled Bank IN KPPP. The contractor has to submit the original Bank guarantee before entering the agreement if awarded

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

To qualify for award of this contract, each tenderer should furnish qualification information as per clause-3 and section- 3 of Standard Tender Document attached to this tender and all the Formats prescribed in the bid documents shall be filled by the tenderer in full and complete manner. Otherwise the tender will be rejected.

All scanned documents to be uploaded shall be in original and legible

Work done certificate should be issued by competent authority not below the rank of Executive Engineer.

The Financial Bids will be open on the dates mentioned or after approval of the technical bids from the competent authority.

The employer is not responsible for any delay in accessing e - Procurement Portal and the employer is not responsible for non production of uploaded documents in e - Procurement Portal. The tenderer has to ensure that all the documents required are uploaded correctly.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents of K.P.W.D. and further orders thereon. The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

Within 20 days of receipt of the Letter of Acceptance, the successful Tenderer shall deliver to the Employer a Security deposit for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders ( Difference between amount put to tender and quoted amount).

The tender of any tenderer who does not accept the conditions contained in the tender document is liable to be rejected. Conditional tenders will not be accepted.

The cost of tender form shall not be refundable. The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. No interest will be paid by the Government on the Earnest money deposit.

The rates quoted shall be through rates for finished items of work inclusive of all lead and lifts, loading and unloading charges, all incidental charges and all Royalty etc., complete payable to the Government or Local bodies in the Region.

The rates quoted shall be inclusive of providing barricading fittings of danger lights, Jungle clearance near work spot / watchman etc., complete and maintained till completion of work and removing on completion as directed by the Engineer-in-charge of work. Rates quoted should includes clearance of site prior to commencement of work and its closure in all respects and holds good for all works under all conditions of site, moisture and weather.

A Cess of 1% of the total approved amount of contract will be deducted from the work bill towards the Building and other construction workers welfare in accordance with the Govt. Order No. LD 300 LET 2006 Bangalore dated 18-1-2007. Royalty on construction materials and other taxes will be deducted as per prevailing Government orders. Contractor should follow strictly the prevailing rules of labour act.

All the materials required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost. All quantity and gradation of metal collected for the works should be got approved by the competent authority before use.

Contractor should execute the project with least impact to the environment. The Contractor should maintain the work during defective liability period as per contract conditions.

Omission and Typographical errors which is in the opinion of the Executive Engineer, will not be a ground for claims of extra payment. If any of the dates mentioned happens to be a general holiday, the next working day will holds good.

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, Public Works Department, Division, Chitradurga during office hours on all working days.

The tenderer should have registration under section 7 of Building and other construction works act 1966. (As per G.O. No. LD 95 LET 2013, Bangalore dated 01-4-2013.

The Defects Liability Period is 12 months after successful completion of the Project

Increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time.

The tenderer should be a KPWD registered Class-III and Above

Tenderer should produce certificate of work insurance polices before executing the work.

Tenderer submit work program before executing the work

The Successful bidder has to follow the prevailing Government orders regarding Royalty Charges. The Contractor has to submit MDP Certificate along with the running contractor bills. Otherwise Department will take necessary action as per the Government Orders / Circulars.

GST shall be paid to the tendered amount separately as per Government order no FD 20 CSL 2022, Bangalore Dated: 15.07.2022 and also as per circular issued by the government vide letter No. FD 447 Expenditure-12/2022, Bangalore Dated: 30.07.2022

The period for completion of the work is 11 months (Including Monsoon)

EMD for Rs. 100000.00 shall be paid through KARNATAKA PUBLIC procurement PORTAL (KPPP) and the Balance of Rs.17000.00 by Bank Guarantee issued by Nationalised/Scheduled Bank. Contractor should upload the scanned Copy of original Bank Guarantee issued by Nationalised/Scheduled Bank IN KPPP. The contractor has to submit the original Bank guarantee before entering the agreement if awarded

Estimate rates are excluding GST as per common SR 2023-24 CONTINUED FOR 2024-25 and prevailing GST (18 percent of Amount put to tender) amount is kept in form of Lump sum in sanctioned estimate according to guidelines in common SR 2023-24 (As per circular from Govt. of Karnataka no.12/2024 Bangalore Dt: 09.08.2024) Therefore amount put to tender and ECV amount are excluding GST. KPPP-PORTAL format has No Options to add GST separately at stage of Draft Tender Schedule Process for Over All amount put to Tender, tender has been inviting through an option with INCLUSIVE. But the item wise rates do not include GST. Hence GST will be paid separately for the quoted amount accordingly. Declaration certificate must be attached mandatorily.

The Successful bidder has to fallow the prevailing Government orders regarding royalty charges. The contractor has to submit Material Dispatch Permit (MDP) for all naturally available Resources / Materials along with the running contract bills, otherwise necessary action will be taken as per GO/Circulars.

As per GO Circular No. FD 417 Expenditure-12/2024 Dt. 09.08.2024 The Government and the contractor are bound to Pay/refund accordingly if the GST rates are revised during the contract period.

Head of Account 4059-80-051-0-29-386 Departmental Buildings

Technical Criteria

General

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

To qualify for Award of this contract, each Tenderer in its name should have in the last five years, i.e. 2019-20 to 2023-24 satisfactorily completed as prime contractor, at least one similar work such as Construction of Building work of value not less than Rs 29.22 lakhs.Work done Certificate issued by the competent Authority of rank not less than Executive Engineer

Work Done Certificate

The Tenderer should have executed in any one year in the last five years i.e. 2019-20 to 2023-24 the following minimum quantities of work 1. Earthwork Embankment 183.00 m3 2. PCC RCC 121.00 m3 3. BBM Solid Concrete Blocks 75.00 m3 4. TMT steel 9.41 tonne 5. Plastering 893.00 m2 6. Flooring Granite Vitrified Ceramic 242.00 m2 done Certificate issued by the competent Authority of rank not less than Executive Engineer

Work Done Certificate

The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totaling Rs. 1.67 lakhs in any one year & should up load consent letter from the electrical sub-contractor.

Work Done Certificate

Capabilities of Vendor

Statement showing the Existing commitments and ongoing works, in the prescribed proforma as per 1.5 A of Section 3 of Qualification information should be furnished.

Others -- Statements should be countersigned by the Executive Engineer or Equivalent officer

Statement showing Details of works for which tenders are already submitted in the prescribed proformaas per 1.5 B of Section 3 of Qualification information should be furnished.

Others -- Statements should be countersigned by the Executive Engineer or Equivalent officer

Statements/details as per 1.3, 1.4, 1.6, 1.7, 1.8, 1.9, and 1.12 of Section 3 of Qualification information should be furnished.

Others -- Statements should be countersigned by the Executive Engineer or Equivalent officer

The Tenderer should be a KPWD Registered Class-III and above contractor.

PWD Registration Certificate (Class I/II/III/IV)

Financial Status

To qualify for Award of this contract each Tenderer in his name should have in the last five years i.e. 2019-20 to 2023-24 achieved in at least two financial years an average annual financial turnover in all classes of civil engineering construction works only of Rs. 58.44 Lakhs. Balance sheet & Profit & Loss Account indicating contract receipts issued by the competent accountant / Authority with UDIN number

Audited CA Certificate of Annual Turnover

Each tenderer should further demonstrate liquid assets and/or availability of Credit facilities of not less than Rs. 17.53 Lakhs Credit lines / letter of credit / certificates from banks for meeting the fund requirement etc,.

Line of Credit

The E.M.D. as prescribed should be submitted by the Tenderer and In case of Bank Guarante valid for 135 days as prescribed in Karnataka public Procurement portal.

Others -- Scanned copy of E.M.D and Scanned copy of Bank Guarantee

Others

GST Declaration Certificate

Others -- GST Declaration Certificate

Fee & Financial Details

Tender Fee Amount

₹1,470

EMD Fee Amount

₹1.2 L

Important Dates

Last Activity

30 Dec 2024

Published

30 Dec 2024

Bid Opening

8 Jan 2025

Download Ends

6 Jan 2025

BOQ Preview

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation top...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- Including cost and conveyance of all materials labour HOM of machineries equi...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

•

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

•

Providing and fixing expansion hold fasteners on C.C./R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm ---- In...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

•

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

•

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...

•

Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm...

•

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

•

Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete.

•

---- Including cost and conveyance of all ...

•

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls at 1.25 ltr/10 sqm over and including one coat...

•

Providing and laying cinder concrete in cement 1:15 (1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curi...

•

Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete.

•

---- Including cost and conveyance of all ...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

•

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

•

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 150mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap fo...

•

Electrification

•

Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting th...

•

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J ho...

•

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J ho...

•

Supplying and fixing PVC/metal conduit Deep junction box, 19/20 mm deep Junction box ---- Including cost and conveyance of all materials labour HOM of machineries equipment lead and lift loading an...

•

Supplying and fixing PVC/metal conduit Deep junction box, 25 mm deep Junction box ---- Including cost and conveyance of all materials labour HOM of machineries equipment lead and lift loading and u...

•

Supplying And Fixing Metal Fan Box with Round Hook. ---- Including cost and conveyance of all materials labour HOM of machineries equipment lead and lift loading and unloading charges, transportation ...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...

•

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, ...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293., 6A One Way Switch ---- Including cost and conveyance of all materials labou...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293., 6A Two Way Switch ---- Including cost and conveyance of all materials labou...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293., 6A Three Way socket ---- Including cost and conveyance of all materials lab...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293., Stepped Fan Regulator Two Module ---- Including cost and conveyance of all ...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293., 16A One Way Switch ---- Including cost and conveyance of all materials labo...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293., 6A Bell Push ---- Including cost and conveyance of all materials labour HOM...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293., 32A DP Switch ---- Including cost and conveyance of all materials labour HO...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293., 6/16A Universal Socket ---- Including cost and conveyance of all materials ...

•

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. ---- Including cost and conveya...

•

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws. ---- Including cost ...

•

Supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws., 60 mm ---- Including cost and conveyance of all materials la...

•

Supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws., 80/90 mm ---- Including cost and conveyance of all materials...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers., 63 A ---- Including cost and conveyance of all materials labour HOM of ...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit bre...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit bre...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit bre...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit bre...

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single ph...

•

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto...

•

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240...

•

Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewi...

•

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection ...

•

Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hour...

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board., 6A Batten Holder ---- Including cost and conveyance of all materials labour HOM of machineries equipme...

•

Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC po...

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires,...

•

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, ne...

•

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary len...

•

Extra length of GI pipe of class B 19mm dia for down rod. ---- Including cost and conveyance of all materials labour HOM of machineries equipment lead and lift loading and unloading charges, transpo...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required., 25 x 3 mm GI strip ---- Including cost and conveyance of all materials labour HOM of machineries equipment le...

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Handles 300mm ---- Including cost and conveyance of all materials labour HOM of ...

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Aldrop 16mm dia, 300mm ---- Including cost and conveyance of all materials labou...

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Tower Bolts 150x10mm ---- Including cost and conveyance of all materials labour ...

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Tower Bolts 250x10mm ---- Including cost and conveyance of all materials labour ...

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS hinges 100 mm ---- Including cost and conveyance of all materials labour HOM of ...

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Door stopper 75mm ---- Including cost and conveyance of all materials labour HOM...

•

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- Including cost and conv...

•

Providing and fixing door latch with necessary screws etc complete. Bright finished brass latch ---- Including cost and conveyance of all materials labour HOM of machineries equipment lead and lift lo...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Administrative approval.pdf

Others - ADMIN • 1.75 MB

Design.pdf

Others - DESIGN • 2.47 MB

15327 kw-3.doc

Tender Document • 1.05 MB

GST Declaration.docx

Others - GST Declaration Certificate • 0.01 MB

ERC.pdf

Others - ERC • 0.70 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Buildings

CONSTRUCTION OF ADDITIONAL FOUR CLASSROOMS FOR GOVT. HIGHER PRIMARY SCHOOL AT JAJUR IN CHALLAKERE TALUK, CHITRADURGA DISTRICT

Public Works Department

PWD Division Office Chitradurga | Karnataka

Amount: ₹58.4 LCloses: 7 Jan 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published30 Dec 2024
Closed7 Jan 2025
Retendered30 Dec 2024