WBPWD/AE/DESD /eNIQ-21/2024-25

Amount

SITC of LED Glow Signage Board (Router Cutting) with liquid Acrylic letters on ACP Board of 3 mm Thick (Make Aludecor/Alstone) of size 20ftx5ft to accommodate all the matters/contains of "সৃষ্টান্ন" or as approved by the authority to be on existing MS Square/ Round hollow bar, Base plate for fixing the necessary Nuts, Boits, Washers, supporting angle iron, Clamp etc and ACP Sheet on all sides to be moulded uniformly, Side fabricated by Aluminium Channel, upon which elevated or box type letter made from imported liquid acrylic will be fixed. The Thickness of Acrylic will be 5 mm (for small letters), 8mm (for medium letters) and 10 mm (for big letters). The Back Side of the letters is covered by 3 mm thick ACP (Make-Aludecor/Alstone) or Branded WPC Board. The inside of the letter Supplying and Fixing of best Quality LED Lighting arrangement of fully water proof IP67 Zig-Zag strip made of Samsung 2385 LED module, 100 Lumen/watt (containing 54 LED per Mt. & 9W/Mt.) or Korean LED Module Made Made Samsung 5630 LED (1.2W per Module) to be Fixed in proper arrangement with necessary inter connection. The electrical parts & Driver should be protected from rain & Dust. The warranty of the LED will be minimum two years. The letters are sealed by exterior grade Silicon. The back side of the Board Covered by 22 SWG G.I sheet with Nuts & Bolts. This board shall be fixed on existing MS structure with necessary fixing arrangement incl. painting by two coat aluminium paints after preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint

Supply of 1.5L capacity, 1ph, 50Hz, Electric Kettle (Make: Havells/ Bajaj/ Crompton/ Milton)

Supply of 1.1KV grade 4Cx70 sqmm XLPE insulated Armoured cable. (Make: Havells/Polycab/RR)

Laying of 4 core 70sqmm cable on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting

S&F compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables for 4Cx70 sqmm cable

Finishing the end of 4Cx70 sqmm XLPE armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials

S&F medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

Dismentling the existing sign board and shifting to warehouse or as per direction of EIC.

Add GST @18% on Total from item no 1 to 8.

Add LWC @1% on Total from item no 1 to 9 .

DURGAPUR POWER (BID ID -6238985)

SASTIK ENTERPRISE (BID ID -6237727)