PROVN OF PATHWAY ALONGWITH ELECTRIFICATION OF SECURITY PERIMETER WALL AND SECURITY LIGHTS ALONGWITH POLE AND ACCESSORIES OUTSIDE BDY WALL FENCING UNDER GE N AKHNOOR

Amount

Surface excavation n exc 30cm deep and averaging 15 cm in any type of soil, complete all as specified and directed.

Add to (or deduct from) item No '1' here-in-before for every 3 cm or part there of above or below 15 cm averege and getting out in any type of soil complete all as specified and directed.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed.

Rolling and consolidating formation surfaces in cutting or filling with 8 to 12 tonne roller including watering, if required, filling in hollow and depressions, forming the required level, graident or camber keeping roller wheel wet complete all as specified and directed.

75mm thick (compacted thickness) WBM in one layer with coarse aggregate of grading 2 (63 to 40mm size) aggregate lime stone, sand stone, flint or quarzite spread watered and rolled and consolidated required gradient and camber with 8-12 tonne power roller, complete all as specified and directed.

Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations filling and mass concrete, complete all as specified and directed.

Sand filling under floors or in foundations including watering and consolidation (25mm thick layers) complete all as specified and directed.

Machine pressed concrete interlocking paver block any shape, size and colour confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment over sand cushion complete all as specified and directed. Note:- Sand cushioning shall be measured & paid seperately.

Plain cement concrete 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in copings, and edges of path, roof kerb etc, including ewathering, slighely rounded or chamfered angles and throating etc, including use and waste of necessary formwork complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Mild steel work conforming to Fe 290 Gde E-165 as in posts and struts etc in fencing including cutting tops to shape as directed, drilling holes, notching for wire, flat iron fillets (for securing barbed wire etc) including all necessary drilling, bolting or riveting welding etc and similar work complete all as specified and as directed.

Preparation of new or previously untreated steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of red oxide primer, complete all as specified and as directed.

UPVC (SWR) type B pipes 110mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

Dismantling and setting aside for re-use with in 50 metres concrete/steel poles of any size including foundation and coping as specified and directed.

Supply, laying and testing XLPE insulated armoured heavy duty, electric cable (heavy duty) with stranded aluminium conductor, 1100 volts grade, heavy duty cable, cross-sectional area 25 Sqmm 3.5 core laid in trenches or passing through pipes complete all as specified and directed.

Supply and laying HDPE DWC Pipe 50mm Note: Supreme, SFMC pipes, Prince as approved .

Steel tubular swaged pole type 410 SP-31 (9 metre long) with CI base plate and including one coat of red oxide chrome primer and two coats of Aluminium paint on surfaces exposed to view and making 30cm wide strips (Total 5 Nos) with yellow and black paint alternately on external surfaces above PCC benching including numbering with black paint and painting with bituminous paint externally complete for portion embeded in PCC all as specified and directed.

LED street light fitting 70 watt 230 AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multuple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and laying and testing LT cable XLPE 1100 Volt grade 16 Sqmm 4 core with stranded aluminim conductor PVC sheathed armoured laid in trenches/along poles/through pipe/through duct complete all as specified and as directed.

Supply and fixing and testing weather proof flat three Core PVC insulated & sheathed Copper stranded conductor cables 1.0 sqmm drawn through street light pole duly making the hole upper and down both place and connection the street light to DB Box all as specified and directed.

GI pipe 15mm bore light grade for protection of cable including fixing along pipe along pole complete all as specified and directed.

Bracket made out of 40mm x 5mm Angle iron 1.5 metre long and both end hole for fixing of street light including S & F for MS clamps, back plates fabricated from structural steel section 50 x 6mm, including nuts, bolts, washers, welding cold or hot, drilling of holes for bolts, in any shape or size including two coats of Alumunium paint over a coat of Red oxide primer after preperation of steel surfaces complete all as specified and directed.

Loop In and Loop Out Box pole mounted out door type Hot press Moulded SMC Junction Box of inside dimension not less than 300x300x150mm and outer dimension of 400x400x200mm with locking arrangement suitable for 240 V, 50 Hz including MCB SP of 6 Amp cap, fixing with 4/2 Nos Aluminium busbar of 30 Amp rating for Three/single phase with neutral, painted with powder coating in siemens grey colour including clamp for fixing with steel pole all as specified and directed.

Excavation in tranches not exceeding 1.5 m wide and not exceeding 1.5 m deep for foundation laying cable including getting out in any type of soil complete all as specified and directed.

Returning filling in including spreading watering and well ramming in layers not exc 25 cm complete all as specified.

Removing surplus soil to distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Protection to cable with one layer of brick laid flat across the cable using old size sub class 'B' Bricks all as specified and directed.

Sand cushioning to under ground electric cables including watering and consolidation all as specified and directed. Note: For payment purpose, only punned thickness shall be measured)

Plain cement concrete1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete all as specified and directed.

Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in pole coping complete including necessary from work all as specified and directed.

MAMTA ENTERPRISES (BID ID -3452694)

M/s Chopra Constructions (BID ID -3456695)

JR CONSTRSTRUCTION CO. (BID ID -3457482)

M/s Rajesh Kumar Contractor (BID ID -3452315)

Ankush Gupta (BID ID -3452809)

bushan kumar (BID ID -3457656)

ASIA ENTERPRISES (BID ID -3452808)

M/S SIKANDER KUMAR SHARMA (BID ID -3457017)

M/s Sekinder Paul Sharma (BID ID -3452629)

MEELU ENTERPRISES (BID ID -3456872)