Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹5.1 LAccepted-Finance KAUTILYA APPT MIG 133 PKT B PH II SEC 14 DWARKA NEW DELHI 110075 | SOUTH WEST DELHI | DELHI | 110075 | ₹5.1 L | 1 | Accepted-Finance L1 |
| 2 | 2₹5.3 LRejected-Finance | ₹5.3 L | 2 | Rejected-Finance L2 |
| 3 | Rejected-Technical 5574 A KANSHI RAM MARKET NEW CHANDRAWAL KAMLA NAGAR DELHI 07 | - | - | Rejected-Technical NDMC registered contractor but receiving of submission of documents in Engg(HQ) in last one month not submitted. |
Tender Value
₹5.7 L
EMD Value
₹12,014
Closing Date
22 May 2026, 11:00 amClosed
EX. ENGINEER (ELECT)/CSPZ
OFFICE OF THE EX. ENGINEER (ELECT)/CSPZ UNDER GROUND CAR PARKING ASAF ALI ROAD, DELHI-110002
Providing and fixing of G.S. Sheets with allied works at Kishanganj Pumping Station in CandSP Zone
2026_MCD_277580_1
10/MWEEE-I/2026-27/TC
Open Tender
Machineries/ Mechanical Engg Items
120 days
CSPZ
refer special conditions
2 documents required · 2 mandatory
₹590
₹12,014
27 May 2026
15 May 2026
22 May 2026
15 May 2026
22 May 2026
15 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | |||||
| 1.1 | 1.00 mm thick with zinc coating not less than 275 gm/m² | 208 | Sqm | 1,457.15 | ₹3,03,087.2 |
| 2 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (2.1) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 800 | Kg | 172.6 | ₹1,38,080 |
| 3 | Brick work with common burent clay F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to V level in all shapes and size in: a) Cement mortor 1:6 (1 Cement: 6 coarse sand) | 10 | cm | 9,105.95 | ₹91,059.5 |
| 4 | Supply and Fabrication of pole protection system made up of 8 SWG steel wire mesh of size 25 mm x 75 mm rectangular with 50mm x 50 mm x 6mm MS angle iron for supporting the mesh i/c MV danger plate and grounding the protection system in suitable quality of CC etc as reqd. | 36 | mtr | 1,108 | ₹39,888 |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.84 MB
Tendernotice_2.pdf
PDF • 31.38 MB
Tendernotice_3.pdf
PDF • 0.69 MB
DNIT.pdf
Tender Documents • 4.54 MB
BOQ_324164.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid