Replacement of Steel Tubular Poles 32 Nos and additional 30 no of Poles for street Lights from Diesel Power House to S-4 Station in BSL Colony Sundernagar during the year 2022-23.

Amount

3-STEPPED STEEL TUBULAR POLE: Supply and erection of 3-Stepped steel tubular swaged and welded pole (410-SP-Mpa) of suitable length conforming to IS: 2713- (PART-II)-1980 (Steel tubes conforming to IS: 1161-1979, UTS 42 kgf/ Sq.mm) to fix up to a required planting depth below ground level in a hole of excavation about 45 cm dia. and suitable depth to fill up to 15 cm below G/L with 1:2:4 cement concrete mixture including painting of pole with two coats of approved aluminium paint as required:- Overall length 9 metre, with planting depth 1.5 metre, length of sections 5 metre, 2 metre and 2metre (Bottom, Middle and Top respectively), Outer dia and thickness of sections 165.1mm x 4.85mm, 139.7mm x 4.5mm and 114.3mm x 3.65mm (Bottom, Middle and Top respectively) with approximate weight 154 kg. (410 SP-32) base Plate weight 7.5 kg. of size 12mm thick about 30 cm dia.

OVER HEAD DISTRIBUTION INSULATORS, STAY SETS &CRADLE GUARDS: Supply & erection of stay set consisting of 19/20mm dia of suitable length G.I. stay rod duly threaded upto 300mm at one end and shaped on the other end. MS plate size 30cm x 30cm x 6mm with 20mm dia. hole drilled in the centre of the plate G.I. stay wire size 7/10 SWG, G.I. thimble for stay, binding, Egg/Strain insulator, MS elbow made out of 16mm plain sheet and a 20 cm long piece of 50mm x 50mm x 6mm size 20cm long angle iron made to the shape as approved by Engineer-in-charge. Stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size MS flat with required number of nut and bolts 16mm dia. on one end and shall be embedded in the on the other end. The stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042Cum. The job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved/desired by the the Engineer-incharge

SHEET METAL CUBICAL PEDESTAL, TOWER STRUCTURES, HT & LT MISCELLANEOUS ITEMS: Supply & erection of 'D' iron clamp 50mm x 6mm flat iron complete with fixing bolts and nuts (16mm x 200mm) including making holes in the pole as approved by Engineer-in-charge.

OVER HEAD DISTRIBUTION INSULATORS, STAY SETS & CRADLE GUARDS: Supply & erection of shackle insulator (medium) with fixing bolts and nuts confirming to relevant ISI specifications as approved by Engineer-in-charge

Nut & Bolts with washer 6”x20 mm *(Half Thread)

LAYING OF UNDER GROUND CABLES, DISMENTALLING & ERECTION OF POLES AND CEMENT CONCRETE MUFFS: Labour for dismantling 3-stepped steel tubular pole upto 16m.

G.I. Wire 8 S.W.G.

Erection stringing and sagging of aluminum conductor steel reinforced (ACSR) on poles including binding with insulators using aluminium wires complete as desired by Engineer in charge of the site ACSR-DOG conductor (100 sq. mm) Size (6/4.55 Al.+1/4.55mm GI)

Bidder Name

Amount in Words

RAKESH KUMAR

M/s Prem Enterprises

M/s Rudra Power Xmission

RAKESH KUMAR

M/s Prem Enterprises