Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹4.2 LAccepted-AOC | 1 | Accepted-AOC L1 | |
| 2 | 2₹3.9 L+₹32,819.74 (9.27%)Rejected-AOC | 2 | Rejected-AOC L2 | |
| 3 | 3₹4.3 L+₹75,081.14 (21.2%)Rejected-AOC TETULMURI DHANBAD 00 00 TETULMURI SIJUA DHANBAD TETULMURI DHANBAD 00 00 TETULMURI SIJUA DHANBAD DHANBAD 828121 JHARKHAND INDIA | DHANBAD | DHANBAD | JHARKHAND | 828121 | 3 | Rejected-AOC L3 |
Tender Value
₹4.2 L
EMD Value
₹5,300
Closing Date
27 Feb 2023, 11:00 amClosed
P.E.(EnM)
P.O. of Bokaro Colliery.
Diversion cum Erection of the 11 kV OH Line between Gandhinagar Substation and D.D. Mines, near abandoned C.I.S.F. Barrack, needed due to development of swampy area, feeding power to D.D. Mines Substation, under Bokaro Colliery, BnK Area
2023_CCL_271649_1
PE(EnM)/Bokaro/ e-tender/22-23/ 45
Open Tender
Electrical and Maintenance Works
Item Rate
7 days
Bokaro Colliery.
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,300
Yes
29 Sept 2023
18 Feb 2023
28 Feb 2023
18 Feb 2023
27 Feb 2023
19 Feb 2023
18 Feb 2023 - 27 Feb 2023
Amount
Erection of metallic pole (above 10 m and upto 12 m) in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.
Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required (70 m x 3 phase x 8 span x 0.394 kg = 661.92 kg) (for DOG Conductor)
Supply of 8 SWG G.I. wire (for Earthing & Cradling): (70 m x 3) x 8 span = 1680 m x 0.116 kg = 194.88 kg
Erection of 8 SWG G.I. wire (for Earthing & Cradling): 1680 m x 0.116 kg = 194.88 kg
Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required
Supplying & erection of 11 kV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required.
Supplying and erection of 11 kV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required
Supplying and erection of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for two 11 KV over head line conductors complete with 50 mm x 50 mm x 6 mm angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.
Supplying & erection of 50 mm X 8 mm Ms flat iron pole top bracket / cross arm for single 11/22/33 KV OH line conductors complete with fixing clamps, bolts, nuts & washers drilling holes for insulators pins bolt & nut etc & painting with primer & finish paint as required.
Supplying and erection of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.
Supplying and erection of a set of cross bracing FRL Same work for 11 KV Over head line double pole structure having four members fabricated out of 50 mm x 50 mm x 6 mm angle iron to form a rectangle of minimum size 1400 mm width x 2500 mm height, complete with 50 mm x 6 mm M.S. flat iron clamps, bolts, and nuts including drilling holes for insulators pins, bolts and nuts etc (as per drawing) and painting primer and finish paint as required.
Supply & erection of P.G. Clamp for tighting of including jumper erection cost.
Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required
Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required. (12 no. Channel Bracket x 1.8 metre x 7.14 kg/ metre = 154.22 kg) + (12 no. Disc x 5 kg = 60 kg) + (6 no. Pin Insulator x 1.5 kg = 9 kg) + (70 m x 3 phase x 4 span x 0.394 kg = 330.96 kg) + (3 span x 70 m x 0.116 kg/m = 24.36 kg) + (Nut, Bolt, Clamp etc. = 40 kg lumpsum), total 618.54 kg
Transporting of Poles from stock to work site and vice versa
Surface dressing of the ground including removing vegetarains and in-equalities not exceeding 15 cm deep and disposal of rubbish lead up to 50 m and lift upto 1.5 m. All kinds
Cleaning jungle including uprooting of rank vegetation grass, brush wood, tress sand saplings of girth up to 30cm measured at a height of 1m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared.
Total impact of GST for the purpose of CTC
CITY ELECTRICALS
SUNRISE ENTERPRISES
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .