SPECIAL REPAIR OF PATIENT COOK HOUSE AT CH(EC) AND SPECIAL REPAIR / REPLACEMENT OF BER ACS ALONG WITH ALLIED WORKS AT CH EC UNDER GE ALIPORE KOLKATA

Amount

NOTES :(i)The bidders/contractors are advised to read tender document & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates. SCHEDULE 'A' PART - I FOR B/R PORTION (Sl No 02 to 100 )

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Material and labour for fly ash Brick work with bricks class designation 75, old size, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed.

Material and labour for old servicable brick work with bricks straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 completes as and specified and directed. Note:-The brick shall be re-used obtained from demolition of brick work at relevant items of BOQ.

Material and labour for fly ash brick work with bricks class designation 75, size as per old size brick, straight or curved on plan exceeding 6 m mean radius half brick thick walls built in Cement Mortar 1:4 complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removal outside of MOD land complete all as specified and as directed.

Rendering 15 mm in Cement Mortar 1:6 on fair faces of brick work or concrete surfaces finished even smooth without using extra cement to the plastered surface complete all as specified and as directed.

Material and labour for Rendering 15mm thick plaster in Cement Mortar (1:4) on fair faces of brick or concrete surface of wall and finished even and smooth without using extra cement, with water proofing treatment. Note:- Water proofing compound shall be measure and paid separately

Supply only integral liquid water proofing compound

Rendering 5 mm in Cement Mortar 1:3 on fair faces of brick work or concrete ceiling surfaces finished fair

Material and labour for complete removal of existing finishing of internal ceiling surface by mechanical appliance and preparation of old surfaces and applying two coats of acrylic washable distemper complete all as specified and directed.

Material and labour for Preparation of new plaster ceiling surface and applying two coats of acrylic washable distemper over a coat of primer over a coat of 1.5 mm thick cement base wall putty complete all as specified and directed.

Material and labour for Preparation of new plaster surface and applying two coats of acrylic washable distemper over a coat of primer over a coat of 1.5 mm thick cement base wall putty complete all as specified and directed.

Material and labour for complete removal of existing finishing of internal wall surface of building/structure by mechanical appliance and preparation of old surfaces and applying two coats of acrylic washable distemper over a coat of primer over 1.50 mm thick wall putty complete all as specified and directed.

Material and labour for preparation of old internal ceiling surfaces and applying a coats of white wash complete all as specified and directed.

Material and labour for preparation of old surfaces and applying 2 coats of colour wash on walls complete all as specified and directed.

Material and labour for preparation of old internal wall surfaces and applying two coats of white wash complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors, sunken floor and paving complete all as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to stores and rubbish off the MOD premises complete all as specified and as directed.

M & L for 40 mm thick PCC flooring in 1:2:4 type - B1 (using 20mm graded aggregate) finished even & rough to receive top layer complete all as specified and directed

Material & Labour of machine cut kota stone slab 20-25 mm thick as riser of step, skirting, dado etcover cement screed base laid and jointed with grey cement slurry mixed with pigment to match shade of slab iuncl rubbing and polishing over 10mm thick screed bed layer in CM (1:3) complete all as specified and as directed.

Material & Labour of machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match shade of slab iuncl rubbing and polishing over 15mm thick screed bed layer in CM (1:6) complete all as specified and as directed.

Material & Labour Glazed ceramic tiles 400x300x7 mm(Coloured) on vertical surfaces such as skirting, dados and riser to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete over 10mm thick screed bed vertical layer in CM (1:4)all as specified and as directed.

Material & Labour of 18mm thick granite ( of any type) work ( table rubbed and polished in pillars and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust admixture of pigment to match with shade of granite over 15mm thick screed bed layer in CM (1:4) including taking down existing one complete all as specified and as directed.

Taking down chowkats/frames with shutters (without taking off shutters from the frame) etc. exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified and as directed.

Taking down chowkats/frames with shutters (without taking off shutters from the frame) etc. not exceeding 1.50 Sqm each complete all as specified and as directed.

Supply and fixing of 30 mm thick flush shutters, solid core construction, with block board core and comercial plywood face panels with one face is covered with decorative face veneer with lipping/frame to match all complete all as specified and as directed.

Material and labour for 30 mm thick, second class hard wood, factory made glazed and skeleton shutters, open rebated and prepared to receive gauze, etc. with plain chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

Supply and fixing of pressed steel door frames (fabricated out of CRLCS sheet 1.6 mm thickness) 100x45 mm size with one or more rebates including necessary fixing lugs, hinges, lock striking plate etc. complete all as specified and as directed.

Supply and fixing of pressed steel door frames (fabricated out of CRLCS sheet 1.6 mm thickness) 125 x 60 mm size with one or more rebates including necessary fixing lugs, hinges, lock striking plate etc. complete all as specified and as directed.

Supply and fixing of steel ventilator with side hung shutters including hinges projecting type with steel handle and steel peg stay complete with gauged bars, dovetailed or welded complete all as specified and as directed

Material and labour for Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

Material & labour of power coated aluminium , three track sliding window with three nos shutters made of aluminium section as per drawing no CWE/KOL/TD-33 of section no 1F-1F including necessary jointing cleats, glazing clips, rubber neoprene packing, roller, locking arrangement, handles 2 Nos , anodised aluminium snap beading screws etc. Complete all as specified. Complete all as specified and as directed. Note Nos :- (i) All window member including fitting & fixture i.e frame, track, shutter frame, etc shall be deem to included quoted rate. Only measure opening size of window. (ii) Only Glass for window & wire mesh shall be measure and paid separately under relevant items of BOQ .

Materials and labour for Mild Steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290(Gde E-165) including taking dwon old one complete all as specified and as directed.

Material and labour for Stainless steel wire cloth, 0.43 mm nominal dia of wire and avergae width of aperture 1.00 mm and fixed with stainless steel wire staples complete all as specified and directed.

Material and labour for Butt hinges Stainless steel 100 mm size complete all as specified and directed.

Material and labour for Aluminium anodised barrel tower bolts of extruded section size 200 mm complete all as specified and directed.

Material and labour for Aluminium anodised sliding door bolt, with hasp & staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long .complete all as specified and as directed.

Material and labour for Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring of size 150 mm, fixed in floor complete all as specified and directed.

Material and labour for Aluminium handles cast type anodised 150 mm size complete all as specified and directed.

Supply and fixing of fixed type partly glazed, partly gauged. Solid PVC ventilator including 3mm thick frosted glass pane, 0.36mm dia & 1.4mm aperture stainless steel wire net, glazing clip, fastener etc complete all as specified and as directed.

Supply and fixing of Door closure hydraulically regulated, designation no 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg of aluminium (die cast) body complete all as specified and as directed.

Supply and fixing of tubular curtain road, stainless steel ss-304, 20 mm dia 1.25 mm thick fixed to brackets complete all as specified and as directed.

Supply and fixing in repairs of figured glass with sheet glass 4 mm thick , pin head type and glazing with oil putty in squares n exc 0.5 sq. M in each pane complete all as specified and as directed.

Supply and fixing of Glazing with sheet glass 5 mm(minmum) thick ordinary quality with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Supply and fixing of sheet glass 4 mm thick ordinary quality fixed to aluminum door & window in squares in each pane of required size complete all as specified and as directed.

Supply and fixing in repairs of sheet glass 4 mm thick ordinary quality fixed to aluminum door & window in squares in each pane of required size complete all as specified and as directed.

Supply and fixing of Solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

Supply and fixing of plain, aluminium sheeting Alloy 31000 H4 in stepped flashing (measured as the minimum rectangle from which the pieces can be cut) and 0.71 mm thick complete all as specified and as directed.

Supply and fixing of Wooden Boarding of Second Class soft wood 20mm thick clean sawn with butt joints, fixed with nails in any situation (except flooring and skirting) complete all as specified and as directed.

Supply and fixing of Continuous (piano) hinges 20 mm size, mild steel bright finished or electro galvanized complete all as specified and as directed.

Material, labour and fixed of power coated aluminium snap grid frame work for false ceiling, size of grid 605 x 605 mm, including aluminium main/closs tee of size 35mm x 23mm x 1.5 mm ( minimum) aluminum BULBED TEES section and aluminium angle of 25mm X25mm X1.5mm thick, sutiable type GI wire hanging arrangement with adjuster all as specified in clause no 10.38 in SSR part-I and including 6 mm thick high pressure steam cured non asbestos fibre cement designer board as per IS 14862 with applying of two coats of acrylic distemper over a coat of primer including taking dwon existing false ceiling system complete all as specified and directed. Make (i) ALUMINUM SNAP GRID:- HINDALCO/ INDALCO/ JINDAL (ii) Non Asbestos Fibre Cement Board as per IS 14862:-ARMSTRONG/ SAINT GOBAIN (GYPROC)/EVEREST / VISAKA Industries Ltd

Material and labour for precast Reinforced Cement Concete cover slab type M-20(Nominal Mix) using 20 mm graded stone aggregate, set in Cement Mortar (1:4) complete all as specified and as directed .

Material & labour of high strength steel Fe-500 TMT bars 8mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed .

Material and labour for complete removal of existing treatment of external wall surface of building/structure by mechanical appliance and preparation of old surfaces and applying two coats of acrylic exterior weather resistant paint(weather proof paint) over a coat of acrylic primer as spcefid in clause No 17.17 of SSR Part-I 2009 complete all as specified and directed.

Stripping out tarfelt from old roof surfaces and removing unserviceable materials from site of work in low laying in outside MOD area complete all as specified and as directed.

Material and labour forrendering 15 mm(Avg) thick in Cement Mortar 1:4 finished even and smooth witht using extra cement after preparation of old roof surface with brushing and applied neat cement slurry with 3.0 Kg of cement per Square Metre existing surface complete all as specified and as directed

Material and labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 all complete complete all as specified and directed.

Material and labour for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 all complete complete all as specified and directed.

Supplying and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt laying over a coat of bituminous primer @ 0.40 Ltr / Sqm and two coats of Bitumen based UV reflective paint with aluminium finish over APP membrane. The membrane shall be laid using butane torch and sealing all joints etc all as specified in Para 11.44.5 of SSR Part I complete all as specified and as directed.

Supply and fixing in repair of chromium plated pillar cock cast copper alloy screwed down with long body with wall flange, and fixed for 15 mm bore GI tube pipe and all accessories complete all as specified and as directed. complete all as specified. Make :- Cat no PIS 02 of Prayag or equivalent model of make list as given in PS as approved by GE.

Supply and fixing of vitreous china wash basin white flat back, size 550 x 400 mm including CP waste coupling,with GI pipe brackets & , rag bolt in cement concrete/brick wall and including taking down existing HWB and making good wall surface complete all as specified and as directed. Make: Cat no S2040103 wash basin of CERA or equivalent model of make list as given in PS as approved by GE.

Supply and fixing of Stainless steel of 304 grade of kitchen plate rack of 1mm thick sheet of size 1066 mm x 533mm x 254 mm complete all as specified and as directed .

Supply and fixing in repair of stainless steeel of 304 grade of kitchen sink with drain board of overall size 915mmx460mm and bowl size 410mm x330mmx160mm depth or equivalent made of 1mm thick stainless steel sheet with 32mm bore CP waste coupling including ball and chain 300mm long with bass cap rubber plug, 32mm bore PVC waste pipe (heavy duty) 90cm long, and bedded in cement mortar and fixed in CP cantilever brackets. Make: Cat No. 1239D of PRAYAG or equivalent make as per PS

Supply and fixing in repair of angle cock cast copper alloy screwed down with long body with wall flange, and fixed for 15 mm bore GI tube pipe and all accessories complete all as specified and as directed. complete all as specified. Make :- Cat no PIS -10 of Prayag or equivalent model of make list as given in PS as approved by GE.

Supply and fixing of PVC ball valve for 20 mm dia GI pipe all complete complete all as specified and directed.

Supply and fixing of Vitreous china wash down water closet (pedestal pattern) with concealed S-trap or P-Trap, white, 390 mm high, seat cover including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc and including taking down existing one complete all as specified and as directed Mak:-SLICK of HINWARE or equivalent model of make list as given in PS as approved by GE.

Taking down old GI tubes of 25/40 mm bore and re-fixing same location after cleaning of old GI tubes and fixed with new fitting , fixture and clamp i wall surface etc. All as specified and as directed

Supply and fixing of 25mm bore galvanised steel tubes, medium grade with all fitting and fixed to walls, ceiling, floors and including taking up old GI pipe complete all as specified and as directed.

Supply and fixing of 20mm bore galvanised steel tubes, medium grade with all fitting and fixed to walls, ceiling, floors and including taking up old GI pipe complete all as specified and as directed. Note for item no 69 -73:- All fitting & fixture such as Bends, Elbows, Tees, Short Pieces, Connectors, Back - Nuts Caps, Plugs, Unions, Flange (core) & flange (ring), reduction Tee, reducing socket, Male & female threaded socket, tank connector, holding clamp shall be provide as per site requiredment as as directed by AGE and same shall deem to be included in quoted rate.

Supply and fixing as in repair of PVC low level flusing cistern 10 litres capacity white with ball valve & brackets with flush pipe complete all as specified and as directed. Make: CHIVAS of CERA or equivalent model of make list as given in PS as approved by GE.

Supply and fixing in repair of chromium plated waste coupling with wast pipe complete all as specified.

Supply and fixing as in repair of PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

Supply and fixing of PVC ball valve for 20 mm dia GI pipe all complete complete all as specified and directed.

Supply and fixing of Chlorinated Polyethylene Chloride (CPVC) pipes 50 mm outside dia , having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings (such as Bends, Elbows, Tees, Short Pieces, Connectors, Back - Nuts Caps, Plugs, Unions, Flange (core) & flange (ring), reduction Tee, reducing socket, Male & female threaded socket, tank connector etc) fixed / laying walls, ceilings or in floors etc. With suitable size MS clamp of spacing 1.00 mtr etc pipe line including taking down existing pipe line complete all as specified and as directed. Note :- All fitting & fixture such as Bends, Elbows, Tees, Short Pieces, Connectors, Back - Nuts Caps, Plugs, Unions, Flange (core) & flange (ring), reduction Tee, reducing socket, Male & female threaded socket, tank connector,brass elbow, brass threaded adaptor , brass tee, holding clamp shall be provide as per site requiredment as as directed by AGE and same shall deem to be included in quoted rate.

Supply and fixing of 15mm bore stop valve angular type cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe for union 15mm complete all as specified and directed.

Supply and fixing in repair of bib cock cast copper alloy screwed down with long body with wall flange, and fixed for 15 mm bore GI tube pipe and all accessories complete all as specified and as directed. complete all as specified. Make :- Cat no PIS -08 of Prayag or equivalent model of make list as given in PS as approved by GE.

Supply and fixing in repairof Towel Rail 600 mm long of chromium plated fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. Make :- Cat no BA-40 of Prayag or equivalent model of make list as given in PS as approved by GE.

Supplying, hoisted and fixed in position of rotational moulded polyethylene water storage tanks in double layers and cylindrical vertical type with manhole lids(closed top) of 2000 litres capacity with ISI marked and all as specified in IS 12701 and including taking down existing water tank complete all as specified and directed .

Material & labour for Cast iron soil, waste and vent pipe, spun pipe, 100 mm bore in any length with or without ears with cement joints laid in trenches or in floors and including taking down existing wast pipe complete all as specified and as directed.

Material & labour of CI (Spun) bends for 100 mm bore pipe complete all as specified and as directed.

Material & labour of CI (Spun) Branch pieces, double (equal or unequal) for 100 mm bore pipe with access doors. complete all as specified and directed .

Chipping of unsound /weak concrete materials including cover plaster from RCC structural member i.e. slabs , beams, columns ,lintel,chajja, fin , facia etc. 50 mm average thickness including tapering all edges, making square shoulders of cavities air and cleaning of exposed concrete surface of lightly picking materials by manual method including foreign materials , loose concrete/aggregate etc and disposal of all debris out side of MOD land and complete all as specified and as directed.

Removing of concrete all around reinforcement bar upto 12 mm dia from behind the reinforcing bars average 25mm (but not less than 15mm air gap)by manual methods (using wire brushing ,chiselling etc) and applying chloride free rust removing chemical on rusting steel reinforcement bar and removing all rust from steel reinforcement bar by emery paper and cleaning the area throughly by water and allow it to dry and totally rust free of reinforcement bar all as complete as per manufacturer's instruction as specified and as directed. Make( Rust removing chemical ):- Reebaklens RR of FOSROC or quivalents solutions SIKA/STP as approved by GE.

Material , labour and prepared existing reinforcement surface by brush and application two component epoxy zincrich primer on existing reinforcement surface of minimum specific gravity 1.75, adhesive bond strength with steel is 1.50N/mm2 and maximum coverage area 5.00 Sqm per litre complete all as specified and directed. Make- Nitozinc primer of FOSROC or equivalents chemical given in approved make list of PS.

Material and labour for introducing new reinforcement bars upto 12 mm dia for structural connection in RCC beams, columns, lintel and slabs including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and upto 200mm including power drilling,fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges etc all as specified and directed.

Material , labour and placing in position free flow shrinkage cementitious micro concrete of compressive strength, flexural strength shall not be less than 50 MPa at 28 days , 5MPa at 28 days respectively for strengthening of beams, columns & other structural elements of average thickness 50mm and including surface preparation & suitabletype formwork etc. as per manufacturers instruction complete all as specified and as directed.. Make(micro concrete):-Renderoc RG of FOSROC or equivalents solutions SIKA/STP as approved by GE.

Supply, materials and application of two component structural grade polymer modified reinstatement mortar of compressive strength, flexural strength shall not be less than 45 MPa at 28 days , 7MPa at 28 days respectively ( maximum coverage area 1.3 sqm per 25 kg pack @ 10 mm thickness) over a coat of epoxy Bonding agent on existing surface for strengthening of beams, columns & other structural elements of average thickness 25mm and morter shall be applied in layers n.exc 6mm thick in layers and including surface preparation as per manufacturers instruction complete all as specified and as directed.(Any storey/ height of building/ structure) Note:- This item shall be execution where shuttering is not possible or small patch repairs of structural elements . Make(polymer modified reinstatement mortar):- Renderoc S2 of FOSROC or equivalents solutions SIKA/STP as approved by GE.

Material , labour and applying of high efficiency polymeric resin base film forming curing agent/compound over concrete surface and maximum coverage area 5.00 Sqm per litre as per manufacturers instruction complete all as specified and as directed. (Any storey/ height of building/ structure) Make:- Concure LP90 of FOSROC or equivalents solutions SIKA/STP/ Maruti / Choksey chemicals.

Material and labour for grinding & polishing of existing terrazzo flooring complete all as specified and directed.

Plain Cement Concrete M-15(Nominal Mix) using 12.5 mm graded stone aggregate as in making good window opening, lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, coping, kneelers, apex stones, bed plates, kerbs, water trough and the like including weathering slightly rounded or chamfered angles and throating as directed

Supply and fixing of 6 mm thick plywood, grade BWP, type BB fixed with screws to timber frame work complete all as specified and directed.

Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m

Supply and fixing of Mild steel work as in framed for bracket, grill, bands, straps, supports or stays for RWP, ventilating pipes, clamps, hold fasts, wall ties conforming to Fe-290 Gde E-165 complete all as specified and directed.

Subtotal of Sch A part-I

SCHEDULE 'A' PART - II FOR E/M PORTION (Sl No 99 to __ )

Taking down carefully unserviceable copper / aluminium point wiring (light, fan, bell socket or power) including all fittings such as switches, socket, ceiling roses , regulators and switch boxes etc complete and making good the disturbed surfaces complete all as specified and as directed.

Material and labour for point wiring with PVC insulated unsheated stranded copper conductor cable of size 1.5 sq mm in and including PVC cassing caping of required width with all necessary fittings with sunk cast iron /pressed steel terminal box of1.6mm wall thickness and 3 mm thick laminated sheet top cover for mounting switches including 1.5 sq mm PVC insulated unsheathed stranded copper conductor as earth lead and connected to common earth doly for one light / ceiling fan/exhaust fan/bell controlled by one switch complete all as specified and directed by engineer incharge.

All as per item No-100 above but for one bell push point controlled by one bell push complete all as specified and as directed.

All as per item No-100 above but for one 5 amp socket independent complete all as specified and as directed.

All as per item No-100 above but 3 pin 5 amps socket out let point and 5 amps light point with the same board with other suitable complete all as specified and as directed.

Material and labour for point wiring with 4.0 Sq. mm (nominal area) PVC insulated and unsheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including double lock casing caping and accessories alongwith continuous earth wire 4.0 Sq mm PVC insulated and unsheathed single core FRLSH cable 1100 volts grade with stranded copper conductor and connected to common earth dolly complete for one socket outlet6pin15/16 amps on independent board complete all as specified and directed.

Material and labour for point wiring with 2.5 Sq. mm (nominal area) PVC insulated and unsheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including double lock casing caping and accessories alongwith continuous earth wire 2.5 Sq mm PVC insulated and unsheathed single core FRLSH cable 1100 volts grade with stranded copper conductor and connected to common earth dolly, with and including 1.6 mm thick cadmium plated sunk MS pressed steel terminal boxes with 3 mm thick plastic laminated sheet cover fixed with brass screws complete for one socket outlet 6pin15/16 amps on independent board complete all as specified and directed.

Supply and fixing of switch piano flush single pole one way 5 amps complete all as specified and as directed.

Supply and fixing socket out let 3 pin 5 Amps flush type complete all as specified and as directed.

Supply and fixing switch socket outlet multipurpose 5 pin 15 Amps /5 Amps controlled by one switch.

Supply and fixing of switch socket outlet 5 pin 6 Amps 230 volts flush type complete all as specified and as directed.

Supply and fixing ceiling rose surface bakelite 65x50mm three terminals complete all as specified and as directed.

Supply and fixing in repair call bell, ding dong AC 230 volt single pole (ding dong type).

Supply and fixing in repair bell push flush type 5 Amps complete all as specified and as directed.

Material and labour for Electronic type fan regulator step type 120 watt, 230 volt complete all as specified and as directed. Make : Code no 14502 of Anchor or equivalent model of make list as given in PS as approved by GE.

Supply and fixing of LED surface/ceiling mounting(suspended from ceiling) box type light fitting 20Watt with LED Lamp , drive and made of epoxy powder coated extruded aluminium channel housing with high quality polycarbonate opal diffuser cover & high power LED’s as light source with 120 Lumen per watt (Minimum) and including all other standard accessories as per manufacture instructions ,internally pre-wired including connecting up three core1.00sq. mm copper conductor flexible wire/cable complete all as specified. Make : Model No CIS-305-40-57-SL-DP-NWH of Crompton or equivalent model of make list as given in PS as approved by GE.

Supply and fixing of sheet metal enclosure for MCBs to be used singal pole & nutral double door 8 Way 200 Amps rated busbar and including fixed with 25mm x 6 mm mild steel clamp of suitable length and including taking out old DB complete all as specified and as directed.

Supply and fixing of sheet metal enclosure for MCBs to be used singal pole & nutral double door 4 Way 200 Amps rated busbar and including fixed with 25mm x 6 mm mild steel clamp of suitable length and including taking out old DB complete all as specified and as directed.

Supply and fixing as in repair Sheet Metal enclosures for DB's for fixing of MCBs Tripal pole & nuteral points 4 way 415 Volts AC including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed.

Supply and fixing of MCB SP of rating 6 to 32 Amps 240 V complete all as specified and as directed.

Supply and fixing MCB DP 40 to 63 amps 415 volts 10KA breaking capacity.

Supply and fixing MCBs four pole 40-63 Amps capacity complete all as specified and as directed.

Supply and fixing MCBs four pole 100 Amps capacity complete all as specified and as directed.

Supply and fixing of Metal distribution box with clad plug and socket and including SPN-MCB control 2 pin & earth plug with socket , 20 A, 240 Volts universal type complete with one MCB 20 A SPN 240 volt complete all as specified and as directed. Make :- Cat No 5078 14 of Legrand or equivalent model of make list as given in PS as approved by GE.

Supply and fixing of sub main wiring with two single core 6.0sqmm (nominal area) PVC insulated copper conductor FRLSH, multi stranded, unsheathed 1100 volts grade IS-694 marked in PVC conduit and accessories accessories including one single core 6.0sqmm copper conductor cable FRLSH as earth wire and including taking out old sub-main wiring complete all as specified and as directed. NOTE:- (a) All runs of copper conductor and one run of conduit shall be measured as one run length.

Supply and fixing of sub main wiring with four single core 10.0sqmm (nominal area) PVC insulated copper conductor FRLSH, multi stranded, unsheathed 1100 volts grade IS-694 marked in PVC conduit and accessories accessories including two single core 10.0 sqmm copper conductor cable FRLSH as earth wire and including taking out old sub-main wiring complete all as specified and as directed. NOTE:- (a) All runs of copper conductor and one run of conduit shall be measured as one run length.

Supply and fixing of sub main wiring with four single core 16.0sqmm (nominal area) PVC insulated copper conductor FRLSH, multi stranded, unsheathed 1100 volts grade IS-694 marked in PVC conduit and accessories accessories including two single core 16.0 sqmm copper conductor cable FRLSH as earth wire and including taking out old sub-main wiring complete all as specified and as directed. NOTE:- (a) All runs of copper conductor and one run of conduit shall be measured as one run length.

Supply and fixing of sub main wiring with two single core 4.0sqmm (nominal area) PVC insulated copper conductor FRLSH, multi stranded, unsheathed 1100 volts grade IS-694 marked in PVC double lock casing caping and accessories accessories including one single core 4.0 sqmm copper conductor cable FRLSH as earth wire and including taking out old sub-main wiring complete all as specified and as directed. NOTE:- (a) All runs of copper conductor and one run of conduit shall be measured as one run length.

Earthing as in repair complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below ground level connetced with earthing wire 4.0mm dia as earthing lead by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 15 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 Mtr etc all as shown on electrical plate No. 5 of MES Schedule Part-I complete including testing on completion. On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost.

Material & Labour for galvanized iron strip 32 x6 mm burried in ground including all excavation and earth work connecting at ends & jointing etc complete all as specified and as directed.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (to be measured only when found serviceable in all respects complete for reuse)

Rer-fixing only MCB of any size complete all as specified and as directed.

Supply, Installation, testing & Commissioning of hi wall split type Air conditioners of cooling capacity 1.5 ton , 5 Star Rating of BEE, comprising of indoor/outdoor complete with cordless remote control unit, inverter technology with independent evaporator and one compressor and with in built air ioniser and plasma filter for better indoor air quality, including suitable size copper refrigerant piping with 13mm nitrile rubber insulation, electrical interconnection copper cable between indoor and outdoor units, PVC drain pipe complete all as specified and as directed.

Supply, Installation, testing & Commissioning of hi wall split type Air conditioners of cooling capacity 2.0 ton , 5 Star Rating of BEE, comprising of indoor/outdoor complete with cordless remote control unit, inverter technology with independent evaporator and one compressor and with in built air ioniser and plasma filter for better indoor air quality, including suitable size copper refrigerant piping with 13mm nitrile rubber insulation, electrical interconnection copper cable between indoor and outdoor units, PVC drain pipe complete all as specified and as directed. NOTES for Item No 131 & 132 :- (i) The quoted rate shall be deemed to include taking down existing AC, deposite to MES store old one, lifting, shifting, positioning at site of all the equipment, fittings, topping up of refrigerant, outdoor control panel, bracket / clamp for indoor/outdoor units installation, vibration isolators, and ancillary material as per manufacturer’s instruction. (ii) Refrigerant piping upto 5 m, copper conductor cable upto 5 m, remote controller, drain pipe upto 5 m shall be measured and paid under above items. Make:- Carrier/Daikin/Hitachi/Bluestar/Voltas/Godrej

Supply, installation, testing and commissioning window type air conditioner electrical driven, single phase of capacity 1.5 TR, 5 star rating including electrical connection complete all as specified and as directed. Note :-1. The quoted rate shall be deemed to include taking down existing AC, deposite to MES store old one, lifting, shifting, positioning at site of all the equipment, fittings, topping up of refrigerant, bracket / clamp for indoor/outdoor units installation, vibration isolators, and ancillary material as per manufacturer’s instruction. 2. Cordless remote control unit, drain pipe upto 4 m shall deemed to be included in the quoted rate. Make:- Carrier/Daikin/Hitachi/Bluestar/Voltas/Godrej

M & L for MCB protected power unit for Air conditioner with MCB double pole 16-25 Amp, Starter Unit 16-25 Amp and socket 16-25 Amp with plug top including taking out of old metal plug socket complete all as specified and directed Make: Cat No DHDUCDP0253016-25 of Make Havells or equivalent model of approved make given in PS approved by GE

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ₹ ___________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

RADHA ENTERPRISE

KWALITY CONSTRUCTION