REPAIR/MAINT AND SERVICING OF VARIOUS CAPACITY OF DG SET AND CONNECTED WORKS AND REPAIR/MAINTENANCE OF INDOOR METERING PANELS SUB MAIN WIRING AND ALLIED WORKS OF EAST MG ROAD IN THE AREA OF AGE E/M EXT (ELECT) UNDER GE E/M LUCKNOW

Amount

Servicing/ maintenance of DG Set from authorised representative or service engineer from the manufacturer of DG set of capacity 250/350 KVA such as injector & valve tappet setting, checking of vibration damper, checking turbo charger, oil leakage, tightening mounting screws & nuts, replacment of filters & oil, checking inlet & exhaust manifold capscrews, checking of fan hub & water pump, removing the existing engine oil, clean the oil sump and refilling with directed quantity of new oil & coolant top up, cleaning of radiator inside with solution i.e restore plus and outside thoroughly with solution(caustic soda with water) including trial and testing etc, complete all as specified and directed by Engineer-in-Charge. NOTES :- (i) Labour for assembling of old/serviceable and new parts to make the DG set in serviceable condition shall be included under this item. (ii)Spare/parts renewed shall be measured and paid separately under appropriate items here in after as supply only labour for fixing shall be included in quoted rate of this item and nothing extra shall be admissible on this account.

Supply only Element for lubrication oil filter for 250/320 KVA DG sets

Supply only Element of paper bypass filter for 250/320 KVA DG sets

Supply only Element for fuel filter for 250/320 KVA DG Sets

Supply only Element for air cleaner inner for 250/320 KVA DG Sets

Suply only Element for air cleaner outer for 250/320 KVA DG Sets

Supply Only Filter screen for 250 /320 KVA DG Sets

Material and Labour for checking of fan hub including minor repairs if any for 250 KVA DG set and checking for alignment , complete all as specified and directed by Engineer-in-Charge

Servicing/ maintenance of DG Set from authorised representative or service engineer from the manufacturer of DG set of capacity 200 KVA such as injector & valve tappet setting, checking of vibration damper, checking turbo charger, oil leakage, tightening mounting screws & nuts, replacment of filters & oil, checking inlet & Exhaust manifold capscrews, checking of fan hub & water pump, removing the existing engine oil, clean the oil sump and refilling with directed quantity of new oil & coolant top up, cleaning of radiator inside with solution i.e restore plus and outside thoroughly with solution (caustic soda with water) including trial and testing etc , complete all as specified and directed by Engineer-in-Charge. NOTES :- (i) Labour for assembling of old/serviceable and new parts to make the DG set in serviceable condition shall be included under this item. (ii)Spare/parts renewed shall be measured and paid separately under appropriate items here in after as supply only labour for fixing shall be included in quoted rate of this item and nothing extra shall be admissible on this account.

Supply only Element for lubrication oil filter for 200 KVA DG sets

Supply only Element of paper bypass filter for 200 KVA DG sets

Supply only Element for fuel filter for 200 KVA DG Sets

Supply only Element for air cleaner inner for 200 KVA DG Sets

Supply only Element for air cleaner outer for 200 KVA DG Sets

Supply only Filter screen for 200 KVA DG Sets

Material and Labour for checking of fan hub including minor repairs if any for 200 KVA DG set and checking for alignment , complete all as specified and directed by Engineer-in-Charge

Servicing/ maintenance of DG Set from authorised representative or service engineer from the manufacturer of DG set of capacity 100/110/125 KVA such as injector & valve tappet setting, checking of vibration damper, checking turbo charger, oil leakage, tightening mounting screws & nuts, replacment of filters & oil, checking inlet & Exhaust manifold capscrews, checking of fan hub & water pump, removing the existing engine oil, clean the oil sump and refilling with directed quantity of new oil & coolant top up, cleaning of radiator inside with solution i.e restore plus and outside thoroughly with solution (caustic soda with water) including trial and testing etc , complete all as specified and directed by Engineer-in-Charge. NOTES :- (i) Labour for assembling of old/serviceable and new parts to make the DG set in serviceable condition shall be included under this item. (ii)Spare/parts renewed shall be measured and paid separately under appropriate items here in after as supply only labour for fixing shall be included in quoted rate of this item and nothing extra shall be admissible on this account.

Supply only Element for lubrication oil filter for 100/110/125 KVA DG sets

Supply only Element of paper bypass filter for 100/110/125 KVA DG sets

Supply only Element for fuel filter for 100/110/125 KVA DG Sets

Supply only Element for air cleaner inner for 100/110/125 KVA DG Sets

Supply only Element for air cleaner outer for 100/110/125 KVA DG Sets

Supply only Filter screen for 100/110/125 KVA DG Sets

Material and Labour for checking of fan hub including minor repairs if any for 100/110/125 KVA DG Sets and checking for alignment , complete all as specified and directed by Engineer-in-Charge

Servicing/ maintenance of DG Set from authorised representative or service engineer from the manufacturer of DG set of capacity 62.5/63/82.5 KVA such as injector & valve tappet setting, checking of vibration damper, checking turbo charger, oil leakage, tightening mounting screws & nuts, replacment of filters & oil, checking inlet & Exhaust manifold capscrews, checking of fan hub & water pump, removing the existing engine oil, clean the oil sump and refilling with directed quantity of new oil & coolant top up, cleaning of radiator inside with solution i.e restore plus and outside thoroughly with solution (caustic soda with water) including trial and testing etc , complete all as specified and directed by Engineer-in-Charge. NOTES :- (i) Labour for assembling of old/serviceable and new parts to make the DG set in serviceable condition shall be included under this item. (ii)Spare/parts renewed shall be measured and paid separately under appropriate items here in after as supply only labour for fixing shall be included in quoted rate of this item and nothing extra shall be admissible on this account.

Supply only Element for lubrication oil filter for 62.5/63/82.5 KVA DG sets

Supply only Element of paper bypass filter for 62.5/63/82.5 KVA DG sets

Supply only Element for fuel filter for 62.5/63/82.5 KVA DG Sets

Supply only Element for air cleaner inner for 62.5/63/82.5 KVA DG Sets

Supply only Element for air cleaner outer for 62.5/63/82.5 KVA DG Sets

Supply only Filter screen for 62.5/63/82.5 KVA DG Sets

Material and Labour for checking of fan hub including minor repairs if any for 62.5/63/82.5 KVA DG Sets and checking for alignment , complete all as specified and directed by Engineer-in-Charge

Servicing/ maintenance of DG Set from authorised representative or service engineer from the manufacturer of DG set of capacity 30/40 KVA such as injector & valve tappet setting, checking of vibration damper, checking turbo charger, oil leakage, tightening mounting screws & nuts, replacment of filters & oil, checking inlet & Exhaust manifold capscrews, checking of fan hub & water pump, removing the existing engine oil, clean the oil sump and refilling with directed quantity of new oil & coolant top up, cleaning of radiator inside with solution i.e restore plus and outside thoroughly with solution (caustic soda with water) including trial and testing etc , complete all as specified and directed by Engineer-in-Charge. NOTES :- (i) Labour for assembling of old/serviceable and new parts to make the DG set in serviceable condition shall be included under this item. (ii)Spare/parts renewed shall be measured and paid separately under appropriate items here in after as supply only labour for fixing shall be included in quoted rate of this item and nothing extra shall be admissible on this account.

Supply only Element for lubrication oil filter for 30/40 KVA DG sets

Supply only Element of paper bypass filter for 30/40 KVA DG sets

Supply only Element for fuel filter for 30/40 KVA DG Sets

Supply only Element for air cleaner inner for 30/40 KVA DG Sets

Supply only Element for air cleaner outer for 30/40 KVA DG Sets

Supply only Filter screen for 30/40 KVA DG Sets

Material and Labour for checking of fan hub including minor repairs if any for 30/40 KVA DG Sets and checking for alignment , complete all as specified and directed by Engineer-in-Charge

Servicing/ maintenance of DG Set from authorised representative or service engineer from the manufacturer of DG set of capacity 15/20/25 KVA such as injector & valve tappet setting, checking of vibration damper, checking turbo charger, oil leakage, tightening mounting screws & nuts, replacment of filters & oil, checking inlet & Exhaust manifold capscrews, checking of fan hub & water pump, removing the existing engine oil, clean the oil sump and refilling with directed quantity of new oil & coolant top up, cleaning of radiator inside with solution i.e restore plus and outside thoroughly with solution (caustic soda with water) including trial and testing etc , complete all as specified and directed by Engineer-in-Charge. NOTES :- (i) Labour for assembling of old/serviceable and new parts to make the DG set in serviceable condition shall be included under this item. (ii)Spare/parts renewed shall be measured and paid separately under appropriate items here in after as supply only labour for fixing shall be included in quoted rate of this item and nothing extra shall be admissible on this account.

Supply only Element for lubrication oil filter for 15/20/25 KVA DG sets

Supply only Element of paper bypass filter for 15/20/25 KVA DG sets

Supply only Element for fuel filter for 15/20/25 KVA DG Sets

Supply only Element for air cleaner inner for 15/20/25 KVA DG Sets

Supply only Element for air cleaner outer for 15/20/25 KVA DG Sets

Supply only Filter screen for 15/20/25 KVA DG Sets

Material and Labour for checking of fan hub including minor repairs if any for 15/20/25 KVA DG Sets and checking for alignment , complete all as specified and directed by Engineer-in-Charge. NOTE FOR ITEM NO 1 to 12 :- (i) The 'C' Check maint spares parts and engine oil etc shall be measured and paid separately in relavent items of schedule and any other check as per menufacturer's instructions & minor repair as directed by Engineer-in-charge is deemed to be included in the rate of maintenance of DG set and nothing extra will be admissible. (ii) 'C' check shall be carried out on running of 1500 hrs or one year which ever is earlier.

Taking down radiator from Gen set of capacity 200/250/320 KVA after disconnecting the water connecting pipe and descaling, cleaning properly with high pressure wash to remove greasy substances from water tubes, tank and outer fins and re-fixing the same after servicing complete and replacement of coolant solution and hose radiator with clips , complete all as specified and directed by Engineer-in-Charge.

Taking down radiator from Gen set of capacity 100/110/125 KVA after disconnecting the water connecting pipe, descaling, cleaning properly with high pressure wash to remove greasy substances from water tubes, tank and outer fins and re-fixing the same after servicing complete and replacement of coolant solution and hose radiator with clips , complete all as specified and directed by Engineer-in-Charge.

Taking down radiator from Gen set of capacity 62.5/63/82.5 KVA after disconnecting the water connecting pipe, descaling, cleaning properly with high pressure wash to remove greasy substances from water tubes, tank and outer fins and re-fixing the same after servicing complete and replacement of coolant solution and hose radiator with clips , complete all as specified and directed by Engineer-in-Charge.

Taking down radiator from Gen set of capacity 30/40 KVA after disconnecting the water connecting pipe, descaling, cleaning properly with high pressure wash to remove greasy substances from water tubes, tank and outer fins and re-fixing the same after servicing complete and replacement of coolant solution and hose radiator with clips , complete all as specified and directed by Engineer-in-Charge.

Taking down radiator from Gen set of capacity 15/20/25 KVA after disconnecting the water connecting pipe, descaling, cleaning properly with high pressure wash to remove greasy substances from water tubes, tank and outer fins and re-fixing the same after servicing complete and replacement of coolant solution and hose radiator with clips , complete all as specified and directed by Engineer-in-Charge.

Dismantling and taking out Dynamo/alternator assembly of 12 Volts/24 Volts from the DG sets replacing the spare parts such as carbon brushes, springs, spring holders, brushes, bearings or any other part required for full functioning of machine and fixing and testing complete etc , complete all as specified and directed by Engineer-in-Charge.

Dismantling and taking out dynamo/alternators from DG set for rewinding and taking out the old coil, cleaning thoroughly and wound with new super enameled copper cord of existing size and gauge, varnishing, drying etc, and fixed with dynamo/alternator properly testing and commissioning , complete all as specified and directed by Engineer-in-Charge.

Radiator hoses of any size and any capacity including jublee clips, clamps, nuts etc complete properly fixed and connected and testing including taking down old one etc , complete all as specified and directed by Engineer-in-Charge.

Dismantling and taking out the FIP (PT Pump Assy) for repairing by replacing the worn out gasket, filter, suction valve, discharge valve and fixing the same after calibration and testing of capacity 200 KVA / 250 KVA/320KVA DG set, complete all as specified and directed by Engineer-in-Charge. Note : Repairing & Calibration shall be carried out by authorised dealers only.

All as per item No 21 above but for DG set of capacity 125KVA/110KVA/100KVA

All as per item No 21 above but for DG set of capacity 82.5KVA/63KVA/62.5KVA

All as per item No 21 above but for DG set of capacity 40KVA/30KVA/25KVA/20KVA /15KVA

Overhauling /calibration of injector assembly for any make /model/ capacity of DG sets including renewal of worn out parts such as copper gasket, injecter nozzle and testing including taking down old one , complete all as specified and directed by Engineer-in-Charge. Note :- Repairing/Calibration shall be carried out by authorised dealer only.

Oil pressure gauge of existing size and model for any make/model/ capacity of DG sets including taking down old one etc , complete all as specified and directed by Engineer-in-Charge.

AVR unit /CVR –II for 320/250/200 DG Set & testing including taking down old one etc , complete all as specified and directed by Engineer-in-Charge. Make : Kirloskar/Cummins

AVR unit /CVR –II for 125KVA/110KVA/100KVA DG Set and testing including taking down old one etc , complete all as specified and directed by Engineer-in-Charge. Make : Kirloskar/Cummins

AVR unit /CVR –II for 82.5KVA/63KVA/62.5KVA DG Set and testing including taking down old one , complete all as specified and directed by Engineer-in-Charge. Make : Kirloskar/Cummins

AVR unit /CVR –II for 40KVA/30KVA/25KVA /20KVA/15 KVA DG Set and testing including taking down old one etc , complete all as specified and directed by Engineer-in-Charge. Make : Kirloskar/Cummins

Dismantling and taking out of defective water pump assembly from the the DG sets and supply and fix new water pump assembly for the DG sets of capacity 320/250KVA/200KVA including testing , complete all as specified and directed by Engineer-in-Charge.

Dismantling and taking out of defective water pump assembly from the the DG sets and supply and fix new water pump assembly for the DG sets of capacity 125KVA/110KVA/100KVA including testing , complete all as specified and directed by Engineer-in-Charge.

Dismantling and taking out of defective water pump assembly from the the DG sets and supply and fix in repairs new water pump assembly for the DG sets of capacity 82.5KVA/63KVA/62.5KVA including testing , complete all as specified and directed by Engineer-in-Charge.

Dismantling and taking out of defective water pump assembly from the the DG sets and supply and fix in repairs new water pump assembly for the DG sets of capacity 40KVA/30KVA/25KVA/20KVA/15 KVA including testing , complete all as specified and directed by Engineer-in-Charge.

Dismantling and taking out the water body pump assembly complete from the DG set upto capacity 62.5 KVA at site and transporting to the work shop for repair and refixed the same after repair & testing , complete all as specified and directed by Engineer-in-Charge after replacement of the following parts:-. (a) Over hauling of water body pump complete - 01 Job, (b) Supply and fix water body kit complete- 01 Set, (c) water body bearing - 02 Nos, (d) water body Hose- 01 Set,

Dismantling and taking out the water body pump assembly complete from the DG set upto capacity 82.5 KVA to 125 at site and transporting to the work shop for repair and refixed the same after repair & testing, complete all as specified and directed by Engineer-in-Charge after replacement of the following parts:-. (a) Over hauling of water body pump complete - 01 Job, (b) Supply and fix water body kit complete- 01 Set, (c) water body bearing - 02 Nos, (d) water body Hose- 01 Set,

Dismantling and taking out the water body pump assembly complete from the DG set upto capacity 200 to 320 KVA at site and transporting to the work shop for repair and refixed the same after repair & testing , complete all as specified and directed by Engineer-in-Charge after replacement of the following parts:-. (a) Over hauling of water body pump complete - 01 Job, (b) Supply and fix water body kit complete- 01 Set, (c) water body bearing - 02 Nos, (d) water body Hose- 01 Set, NOTES for item No. 34 to 37 :- (i)Transportation charges from installation to contractor works shop and back after repair are included in the rates quoted against this item and nothing extra shall be admisible on this account. (ii) Labour for assembling of old/serviceable and new parts to make the pump in serviceable condition shall be included under appropriate item here in after. (iii) Spare/parts renewed shall be measured and paid separately under appropriate items here in after.

Battery terminal made of brass superior quality including taking down old one etc , complete all as specified and directed by Engineer-in-Charge.

Dismantling and taking out the self starter assembly of any capacity (12V/24V) foRunning Metre the DG set and Material and labour for re-fixing the same after repair works including replacing the spare parts such as carbon brushes, springs, spring holder bushes, bearings, or any other spare part not mentioned herein but essentially required for proper functioning of the starter assembly , complete all as specified and directed by Engineer-in-Charge.

Dismantling and taking out armetreature of self starter for rewinding and taking out unserviceable old coil , cleaning thoroughly and rewinding the starter with super enameled copper conductor of existing size and gauge including varnishing drying and re-fixing the same including testing and commissioning , complete all as specified and directed by Engineer-in-Charge.

Flexible pressure hose for lubricant oil and fuel connection for any size/capacity/model/make DG set including taking down old one etc , complete all as specified and directed by Engineer-in-Charge.

PVC heavy duty transparent pipe of size 10 mm dia for Diesel tank indicator with suitable clamps fixed on any type of tank including taking down old one etc , complete all as specified and directed by Engineer-in-Charge.

Belt fan drive for DG sets of 320/250/200 KVA capacity including taking down old one etc , complete all as specified and directed by Engineer-in-Charge.

Belt fan drive for DG sets of 125/110/100 KVA capacity including taking down old one , complete all as specified and directed by Engineer-in-Charge.

Belt fan drive for DG sets of 82.5/62.5/63 KVA capacity including taking down old one , complete all as specified and directed by Engineer-in-Charge.

Belt tensioner for DG sets of 320/250/200 KVA capacity including taking down old one, complete all as specified and directed by Engineer-in-Charge.

Belt tensioner for DG sets of 125/110/100 KVA capacity including taking down old one , complete all as specified and directed by Engineer-in-Charge.

Belt tensioner for DG sets of 82.5/62.5/63 KVA capacity including taking down old one , complete all as specified and directed by Engineer-in-Charge.

Oil pressure cut out suitable for any model/make of DG set upto 250 KVA including takding down old one , complete all as specified and directed by Engineer-in-Charge.

Water temperature cut out suitable for any model/make of DG set upto 250 KVA.including taking down old one, complete all as specified and directed by Engineer-in-Charge.

Ignition switch and key for DG sets of 250/200 KVA capacity including taking down old one , complete all as specified and directed by Engineer-in-Charge.

Repair to radiator of 320/250/200 KVA DG set by soldering of copper pipes rectifying leaks, cleaning and PVC hose fitting complete and fixing back after repair, complete all as specified and directed by Engineer-in-Charge.

Repair to radiator of 125/110/100 KVA DG set by soldering of copper pipes rectifying leaks, cleaning and PVC hose fitting complete and fixing back after repair, complete all as specified and directed by Engineer-in-Charge.

Repairs to radiator of 82.5/63/62.5 KVA DG set by soldering of copper pipes rectifying leaks, cleaning and PVC hose fitting complete and fixing back after repair , complete all as specified and directed by Engineer-in-Charge.

Draining out old engine/lubrication oil from chamber of the DG sets, cleaning of chamber thoroughly and filling new engine/lubrication oil of grade 15W40 , complete all as specified and directed by Engineer-in-Charge.

Draining out old engine/lubrication oil from chamber of the DG sets, cleaning of chamber thoroughly and filling new engine/lubrication oil of grade 20W40 , complete all as specified and directed by Engineer-in-Charge.

Rotating rectifier assembly for 320/250/200 KVA DG set of any make and model, complete all as specified and directed by Engineer-in-Charge.

Rotating rectifier assembly upto 125/110/100 KVA DG set of any make and model , complete all as specified and directed by Engineer-in-Charge.

Rotating rectifier assembly upto 82.5/63/62.5 KVA DG set of any make and model , complete all as specified and directed by Engineer-in-Charge.

Dismantling the defective alternator of any capacity from the existing foundation and Engine after removing all electrical connections transporting to workshop, removing the old wornout burnt winding and rewinding with new the stator assembly with super enameled copper wire, applying insulating varnishing of ‘F’ class baking in oven re-assembling the alternator after transporting back to site re-installing the same carrying out alignment of complete DG set connecting up all electrical connections testing and commissioning , complete all as specified and directed by Engineer-in-Charge. Note : -(a) The rates quoted by the contractor shall deemed to included any other item/spare not mentioned herein but essentially required for fully functional of the alternator. (b) Rate quoted shall be deemed to be inclusive of making good the disturbed surfaces of foundations. (c) The DG set shall be tested for the duration of 4 hours to the entire satisfaction of Engineer- in- Charge. (d)Transportation charges from installation to contractor works shop and back after repair are included in the rates quoted against this item and nothing extra shall be admisible on this account.

Material and labour for dismatling the existing coupling assembly of the alternator of any capacity and make from the engine carrying out the repair works/renewal of spare for proper functioning of the alternator and re-fixing the same ,complete all as specified and to the entire satisfaction of Engineer-in-Charge.

Material and labour for repairing/renewal of the existing broken/leaking PVC fuel over flow pipe of the DG sets of any capacity upto fuel tank placed externally from the DG sets ,complete all as specified and to the entire satisfaction of Engineer-in-Charge. Note : - (a) The rates quoted by the contractor shall deemed to including the cost of PVC pipe and fittings and PCC work for fixing of the pipe as per existing arangement.

Rectifier diode for 250/200 KVA DG sets as per exising make/model/ size including taking down old one etc , complete all as specified and directed by Engineer-in-Charge

Rectifier diode for 125/110/100 KVA DG sets as per exising make/ model /size including taking down old one etc , complete all as specified and directed by Engineer-in-Charge

Rectifier diode for DG sets upto 82.5 KVA capacity as per exising make/size/ model including takding down old one etc , complete all as specified and directed by Engineer-in-Charge

Voltmeter square/ round upto 500 Volts of existing size. Make : MECO/AE including taking down old one, complete all as specified and directed by Engineer-in-Charge

Ammeter 0-300A as per existing size/make/model including taking down old one etc , complete all as specified and directed by Engineer-in-Charge

Indicator lamp assembly 230/110 Volts as per existing make/model/size etc , complete all as specified and directed by Engineer-in-Charge

Battery leads 95 Sqmm copper cable 1.5 Mtr long including brass terminals of suitable size socket with nut, bolts etc , complete all as specified and directed by Engineer-in-Charge.

Techometer as per existing size/make/model including taking down old one etc , complete all as specified and directed by Engineer-in-Charge.

Techometer cable in and out with adopters etc complete as per exisiting size/make/model including taking down old one etc , complete all as specified and directed by Engineer-in-Charge.

Asbestos rope 20mm dia for tightly covered the silencer exhaust pipe etc including taking down old one etc , complete all as specified and directed by Engineer-in-Charge.

Supply only coolant concentrate Pert No SK 802 OIC Make : Valvoline , complete all as specified and directed by Engineer-in-Charge.

Dismantling and taking out the alternator upto 40 KVA capacity from the DG sets from coupling and opening the stator & rotor including cleaning of dust from windings for proper ventilation, renewal of carbon brushes with brush holder and re-assembling the rotor & stator complete with applying suitable greasing & oiling of bearing & moving parts and refixing the same on existing position and testing , complete all as specified and directed by Engineer-in-Charge.

Dismantling and taking out the alternator above 40 KVA but upto 82.5 KVA capacity from the DG sets from coupling and opening the stator & rotor including cleaning of dust from windings for proper ventilation, renewal of carbon brushes with brush holder and re-assembling the rotor & stator complete including applying suitable greasing & oiling of bearing & moving parts and refixing the same on its position and testing , complete all as specified and directed by Engineer-in-Charge.

Dismantling and taking out the alternator and taking out above 82.5 KVA but upto 125 KVA capacity from the DG sets from coupling and opening the stator & rotor including cleaning of dust from windings for proper ventilation, renewal of carbon brushes with brush holder and re-assembling the rotor & stator complete including applying suitable greasing & oiling of bearing & moving parts and refixing the same on its position and testing , complete all as specified and directed by Engineer-in-Charge.

Dismantling and taking out the alternator above 125 KVA but upto 250 KVA capacity from the DG sets from coupling and opening the stator & rotor including cleaning of dust from windings for proper ventilation, renewal of carbon brushes with brush holder and re-assembling the rotor & stator complete including applying suitable greasing & oiling of bearing & moving parts and refixing the same its position and testing , complete all as specified and directed by Engineer-in-Charge.

Fuel feed pump for DG set of capacities upto 250 KVA all as specified including taking down old one including testing , complete all as specified and directed by Engineer-in-Charge.

Material and labour for servicing/repair of AMF panel of DG set upto 250 KVA capacity for smooth functioning of the same with renewal / repairs of AMF panel wiring, control timer, engine starting relay, contact point relay, AMF relay, HRC fuse of existing rating etc complete for DG sets installed at various pokets , complete all as specified and directed by Engineer-in-Charge. Note:- 1. The rates quoted by the contractor shall deemed to included the cost of spares/relays or any other part not mentioned herein but essentially required to make the AMF Panel completely functional and no extra payments shall be made for the same.

Electronic control timer type ET-100 of suitable capacity as required at site including taking down old one , complete all as specified and directed by Engineer-in-Charge. Make:- L&T or equivalent make as approved by GE/Engineer -in -Charge.

Engine starter relay of suitable capacity as required at site including taking down old one , complete all as specified and directed by Engineer-in-Charge. Make:- L&T or equivalent make as approved by GE/Engineer -in -Charge.

Under voltage relay including taking down old one including taking down old one. complete all as specified and directed by Engineer-in-Charge. Make:-PIC / EC / Wader or equivalent make as approved by GE/Engineer -in -Charge.

Pin relay 8/11 including taking down old one, complete all as specified and directed by Engineer-in-Charge. Make:- PLA or equivalent make as approved by GE/Engineer -in -Charge.

Auto Mains Failure (AMF) relay as per existing model and make of AMF panels of DG sets of any capacity including taking down old one , complete all as specified and directed by Engineer-in-Charge.

Recharging of old serviceable battery 12 Volts, 180 AH rating including cleaning complete and filling with acids and distile water as required and testing , complete all as specified and directed by Engineer-in-Charge.

Recharging of old serviceable battery 12 Volts, 150 AH rating including cleaning complete and filling with acids and distile water as required and testing , complete all as specified and directed by Engineer-in-Charge.

Rrecharging of old serviceable battery 12 Volts, 88 AH rating including cleaning complete and filling with acids and distile water as required and testing , complete all as specified and directed by Engineer-in-Charge.

Crocodile clip for battery chargers of required size all as specified and directed including taking down old one , complete all as specified and directed by Engineer-in-Charge.

Lead acid battery 12 volts, 180 AH suitable for DG set including initial charging including connection & testing and taking down old one etc , complete all as specified and directed by Engineer-in-Charge. Make : Model No. FXPO-MHD1800 Exide New express /Amron or equivalent of other specified in Annexure of make .

Lead acid battery, 12 volts, 150 AH suitable for DG set including initial charging including connection & testing including taking down old one etc , complete all as specified and directed by Engineer-in-Charge. Make : Model No. FXPO-MHD1500 Exide New express/Amron or equivalent of other specified in Annexure of make .

Lead acid battery, 12 volts, 110 AH with lead acid suitable for DG set including initial charging including connction and testing including taking down old one , complete all as specified and directed by Engineer-in-Charge. Make : Model No. FXPO-MHD1100 Exide New express/Amron or equivalent of other specified in Annexure of make .

Supply only distill water for batteries, complete all as specified and directed by Engineer-in-Charge.

Battery charger heavy duty type with voltmeter and ammeter, with copper wound transformer, suitable for charging 12 Volts 180 AH battery comple, complete all as specified and directed by Engineer-in-Charge.

Battery charger heavy duty type with volteter and ammeter, with copper wound transformer, suitable for charging 02 Nos 12 Volts 180 AH battery , complete all as specified and directed by Engineer-in-Charge.

V-Belt as per exissting size/model and testing complete etc as specified and directed of the 320/250/200 KVA DG Set , complete all as specified and directed by Engineer-in-Charge.

All as per serial item no.95 above but for 125/110/100 KVA DG Set

All as per serial item no.95 above but for 82.5/63/62.5 KVA DG Set

All as per serial item no.95 above but for 40/30/20/15 KVA DG Set

Material and labour for painting of DG set of capacity 250/200 KVA DG Set. after scrapping of old paint by emmery paper or hot blower and painting with one coats of synthetic enamel paint of approved make as per existing colour/tint with spray gun & writing of SM/MES No as directed size etc , complete all as specified and directed by Engineer-in-Charge .

All as per serial item no.99 above but for 125/110/100 KVA DG Set

All as per serial item no.99 above but for 82.5/63/62.5 KVA DG Set

Material and labour for painting of the acoustic enclosures/outer canopy of the DG sets upto 250 KVA capacity after scrappting old paint by emmery paper or hot blower and painting with applying two coats of synthetic enamel paint of approved make as per existing colour/tint with spray gun and writing the SM/MES No as directed size etc , complete all as specified and directed by Engineer-in-Charge .

Turbo kit suitable for 250/200 KVA DG sets , complete all as specified and directed by Engineer-in-Charge .

Turbo kit suitable for 62.5 to 125 KVA DG sets, complete all as specified and directed by Engineer-in-Charge .

Turbo kit suitable for 15 to 40KVA DG sets, complete all as specified and directed by Engineer-in-Charge .

Self Starter 12 Volt, DC for DG Set of capacity upto 125 KVA including testing , complete all as specified and directed by Engineer-in-Charge . Make of DG Set Kirloskar/Cummins as per existing size and make.

Self Starter 24 Volt, DC for DG Set of capacity upto 320 KVA including testing , complete all as specified and directed by Engineer-in-Charge . Make of DG Set Kirloskar/Cummins as per existing size and make.

Piston assembly for DG set up to 250 KVA capacity of DG sets of any make/model/type of engines including piston ring and gasket as per existing size/make/mode of, complete all as specified and directed by Engineer-in-Charge .

Supply only DC 6/12 VOLT battery cell tester upto 180 AH battery , complete all as specified and directed by Engineer-in-Charge .

Supply only DC 6/12 VOLT battery hydrometer upto testing oof elecrolite specific grevity 180 AH battery , complete all as specified and directed by Engineer-in-Charge .

Supply & chelating cleaner Restore Plus solution Part No. AX1001098 , complete all as specified and directed by Engineer-in-Charge . Make : Cummins for engines cooling system or any other make as approved by GE/Engineer*-in - Charge.

Dismantling the defective alternator of any capacity from the existing foundation and from Engine after removing all electrical connections, transporting to approved authorised workshop, opening and taking out burnt winding, cleaning and then rewinding the stator assembly complete with super enameled copper wire as per existing gauge as per original manufacturer and applying insulating varnishing of ‘F’ class, baking in oven re-assembling the alternator, transporting back to site re-installing the same position, carrying out alignment of complete DG set connecting up all electrical connections testing and commissioning , complete all as specified and directed by Engineer-in-Charge . Note : - (a) Rate quoted shall be deemed to be included of making good the disturbed surfaces. (b) The DG set shall be tested on load as per rated capacity for the satisfaction of Engineer- in- Charge to achieve designed parameters. (c) Transportation charges from installation to contractor works shop and back after repair are included in the rates quoted against this item and nothing extra shall be admisible on this account.

Dismantling the defective, unserviceable Radiator opening as inlet/outlet water cooling system connection and Supplying & fixing new one Radiator Part No. 123200521096 for Engine DG Set Cap 200KVA, Engine Model - TBD2 V8 MkI, including all required accessories/hoses with tightening clamps etc as required inlet & outlet cooling system , complete all as specified and directed by Engineer-in-Charge . Make : Greaves or any other eqivalent make as specified in annexure of make .

Service Charges for Carrying out the 'B' Check maint from authorised rep or service engineer from the manufacturer of DG set of Engine Greaves/Kirloskar/Cummins of 250/350 KVA capacity including checking of vibration damper, checking turbocharger, oil leakage, tightening mounting screws & nuts, replacment of filters, checking inlet & Exhaust manifold capscrews, checking of fan hub & water pump, toping up level the existing engine oil, coolant top up and in replacement, supplying & fixing of following spares , complete all as specified and directed by Engineer-in-Charge :- (a) Kit, fuel filter and ring - 2 Kit (b)Element for Lubrication oil filter - 2 Nos. (c) Kit, Element of super bypass filter - 01 Kit (d) Seal, O Ring - 02 Nos Note :- 'B' check shall be carried out on running of 500 hrs or three months which ever is earlier.

All as per serial item No. 114 here above but DG Set Capacity 200 KVA .

All as per serial item No. 114 here above but DG set capacity 100/110/125 KVA

All as per serial item No. 114 here above but DG Set Capacity 62.5/63/82.5 KVA

All as per serial item No. 114 here above but DG Set Capacity 30/40 KVA

All as per serial item No. 114 here above but DG Set Capacity 15/20/25KVA.

Exhaust Manifold as per exisitng make/model/type of capaicty 250/200 KVA DG set including taking down old one , complete all as specified and directed by Engineer-in-Charge

Exhaust Manifold as per exisitng make/model/type of capaicty 100/110/125 KVA 100/110/125 KVA DG set including taking down old one , complete all as specified and directed by Engineer-in-Charge

Exhaust Manifold as per exisitng make/model/type of capaicty 62.5/63/82.5 KVA DG set including taking down old one , complete all as specified and directed by Engineer-in-Charge

Exhaust Manifold as per exisitng make/model/type of capaicty 30/40 KVA DG set including taking down old one , complete all as specified and directed by Engineer-in-Charge

Exhaust Manifold as per exisitng make/model/type of capaicty 15/20/25 KVA DG set including taking down old one , complete all as specified and directed by Engineer-in-Charge

Exhaust Gasket as per existing make/model/type of capacity of DG set 250/200 KVA DG Set including taking down old one etc , complete all as specified and directed by Engineer-in-Charge

Exhaust Gasket as per existing make/model/type of capacity of DG set 100/110/125 KVA 100/110/125 KVA DG Set including taking down old one etc , complete all as specified and directed by Engineer-in-Charge

Exhaust Gasket as per existing make/model/type of capacity of DG set 62.5/63/82.5 KVA DG Set including taking down old one etc , complete all as specified and directed by Engineer-in-Charge

Exhaust Gasket as per existing make/model/type of capacity of DG set 30/40 KVA DG Set including taking down old one etc , complete all as specified and directed by Engineer-in-Charge

Exhaust Gasket as per existing make/model/type of capacity of DG set 15/20/25 KVA DG Set including taking down old one etc , complete all as specified and directed by Engineer-in-Charge

Pipe water pipe of manifold A bank of capacity of DG set 250 to 15 KVA as per existing make/model/type including taking down old one etc , complete all as specified and directed by Engineer-in-Charge

Pipe water pipe of manifold B bank of capacity of DG set 250 to 15 KVA as per existing make/model/type including taking down old one etc , complete all as specified and directed by Engineer-in-Charge

Microprocessor based tamper proof electronic static energy meter with casing, single phase 2 wire 50 HZ 240 volts with range 10-60 Amps confirming Metreing to IS 13779 & CBIP technical report 88 ISI marked ,complete all as specified and directed by Engineer-in-Charge with the following:- Make Secure meter/HPL/ L&T/Havell's (a) LCD Display (b) Optical communication port © Accuracy class-I (d) Anti tampering features and indication of their records such as (i) Current reversal (ii) Reversal of phase & neutral (iii) Magnatic influence (iv) Neutral disturbance (v) Mains and load teRunning Metreinal interchange (vi) Partial return of load current to earth etc (vii) Digital display of parameters such as active energy, max demand, date,real time, tamper status etc Note : (a) All as specified and fixed on panel with 6mm thick arclic sheet including taking down ole etc ,

All as per Sl No 132 above but three phase 4 wire of cpacity 10-60 Amps

PVC insulated,ISI marked, unsheathed, 1100 volts grade multistranded copper conductor FRLS cable drawn into and including suitable size PVC flexible conduit of size 2x6 sqmm etc , complete all as specified and directed by Engineer-in-Charge.

PVC insulated,ISI marked, unsheathed, 1100 volts grade multistranded copper conductor FRLS cable drawn into and including suitable size PVC flexible conduit of size 2x10 sqmm etc , complete all as specified and directed by Engineer-in-Charge.

Sub main wiring (concealed type ) with two single core 6 Sqmm FRLS PVC insulated and unsheathed 1100 volts grade cables with stranded copper conductor cable drawn through in and including 25 mm dia rigid non metallic PVC conduit and conduit accessories including one single core 6Sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dully complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface in and including taking down old unservicable sub main wiring , complete all as specified and directed by Engineer-in-Charge. Note : (i) 2 run of 6 Sqmm ,1 run of PVC conduit & 1 run of 6 Sqmm cable will be measured as single run. (ii) Extra length of cables/wire required for connection to MCBs shall not be measured and paid separetly the rate quoted by contractor per unit shall be deemed to be included in the quoted rate of this item.

Sub main wiring (concealed type ) with two single core 10 Sqmm FRLS PVC insulated and unsheathed 1100 volts grade cables with stranded copper conductor cable drawn through in and including 25 mm dia rigid non metallic PVC conduit and conduit accessories including one single core 10Sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dully complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface in and including taking down old unservicable sub main wiring , complete all as specified and directed by Engineer-in-Charge. Note : (i) 2 run of 10 Sqmm ,1 run of PVC conduit & 1 run of 10 Sqmm cable will be measured as single run. (ii) Extra length of cables/wire required for connection to MCBs shall not be measured and paid separetly the rate quoted by contractor per unit shall be deemed to be included in the quoted rate of this item.

Epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 4 way VTPN (IP43) suitable for MCCB DB's 415 Volts with 200 Amps rated busbar, neutral and earthing link bar, flush/surface mounting , complete all as specified and directed by Engineer-in-Charge.

Epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 4 way TPN suitable for MCB DB's 415 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting , complete all as specified and directed by Engineer-in-Charge.

Epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 8 way SPN suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting , complete all as specified and directed by Engineer-in-Charge.

MCCB's 4 pole 63 Amp breaking capcity 16 KA fixed type ISI marked working one 415 volts 50 HZ AC supply etc , complete all as specified and directed by Engineer-in-Charge.

MCCB's 4 pole 100 Amp breaking capacity 16 KA fixed type ISI marked working one 415 volts 50 HZ AC supply etc , complete all as specified and directed by Engineer-in-Charge.

MCB TPN ISI marked`C' series working on 240 Volts 50 HZ AC supply of capacity 63 Amp breaking capacity 10 KA etc , complete all as specified and directed by Engineer-in-Charge.

MCB SPN ISI marked `C' series working on 240 volts 50HZ AC supply capaicty 40-63 Amps 10 KA breaking capacity etc , complete all as specified and directed by Engineer-in-Charge.

MCB SP ISI marked ISI Marked `C' series working on 240 Volts 50 HZ AC supply of capacity 40-63 Amp breaking capacity 10 KA etc , complete all as specified and directed by Engineer-in-Charge.

MCB SP ISI marked ISI Marked `C' series working on 240 Volts 50 HZ AC supply of capacity 6-32 Amp breaking capacity 10 KA etc , complete all as specified and directed by Engineer-in-Charge.

Supply, testing and commissioning meter box (90x80x20 cm) factory fabricated in door type made out of 2.0 mm thick sheet metal enclosure fixed on wall with four nos hold fast suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system with hinged panel doors & locking arrangment incl required nos of holes with chromium plated brass cable glands for cable entry and exit complete including necessary internal wiring with PVC insulated multistranded copper conductor single core FRLS cables of size 10 sqmm and spray painted grey hammer tone with one coat of red oxide primer and two coats of synthetic enamel paint of grey or any other approved colour, including connection and housing with following accessories , complete all as specified and directed by Engineer-in-Charge :- (a) MCCB 4 pole 415 V 100 Amps with 16 KA - 01 No (b) MCCB 2 pole 240 volts 40 Amps with 10 KA - 06 Nos (c) Aluminum bus bar with insulation strip of capacity 200 Amps (d) Space of Electric meter with tranperant box-05 Nos (e) Transperant glass Note- Visit the site before quating the rate. The box should be as per existing model

Supply, installation, testing and commissioning out door type LT Feeder Piller/LT panel made out of 3.15 mm thick MS sheet and MS angle section 40x40x5 mm on PCC 1:2:4 type B-1 plateform factory fabricated with front and back openable double door system lockable/openable by Keys completely suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at CPRI for 35 MVA rupturing capacity comprising of the following a) The TPN busbar duly plated copper busbar fitted in cascaded moulding. b) Incoming MCCB 250 Amps 36 kA, 415 volts, FP - 01 Nos c) Outgoing MCCB 100 Amps 25 kA, 415 volts, FP - 04 Nos d) Outgoing MCCB 63 Amps 25 kA, 415 volts, FP - 01 Nos e) Change over switch 200 Amp on load type, 415 volts, FP - 01 Nos f) Provn of blank compartment for future uses, 415 volts, FP - 01 Nos g) Voltage/Ammeter/Frequency meter multi functional meter - 01 No h) LED indicator lamp RYB - 01 Set of three

Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5m depth and getting out in for foundation of pole,stay,laying of cable and pipe in any type of soil etc , complete all as specified and directed by Engineer-in-Charge.

Returing, filling in incl spreading, levelling, watering and well ramming in layers n exc 25cm thick after laying of the cables,jointing & testing , complete all as specified and directed by Engineer-in-Charge.

Removing excavated material to a distance n.exc 50 m & depositing where directed at a level n. exc 1.50 m above the starting point , complete all as specified and directed by Engineer-in-Charge.

Sand cushioning to cables with a layer of sand 8 cm deep before laying the cable and 15 cm depth (punned down to 10 cm depth after laying and stretching of cable), complete all as specificed and directed by Engineer-in-Charge. Note: Punned thickness (over all 18 cm) shall be measured & paid.

Protection of cable with one layer of bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class ‘B’ bricks, complete all as specified and as directed by Engineer-in-Charge.

Supplying and laying, fixing, jointing and testing LT under ground electric power cable crossed linked polyethylene ( XLPE) insulated, galvanised steel strip ISI marked conforming to IS-7098 Marked, with aluminium conductor multi stranded, heavy duty 1100 Volts grade of size 10 sqmm cross sectional area, 2 core complete all as specified laid in trenches/ laid under floor or fixed naked with walls/ on poles/ in ducts /in GI pipes etc. with and including MS clamps, nuts , bolts, washers , complete all as specified and directed by Engineer-in-Charge. Note :- Excavation, earth work, sand cushioning, protection bricks/ tiles/ block and pipe shall be measured and paid separately under appropriate items.

All as per serial item No.154 above but 16 sqmm 4 core

All as per serial item No.154 above but 25 sqmm 4 core

Galvanised iron tube ` light grade' for protection of cable at wall and duct/road/trench for 32 mm dia of pipe , complete all as specified and directed by Engineer-in-Charge.

Ajanta Motor Store

Sanjai sales and services

Shree Tirupati Associates