Balance works of Restoration of Heritage Educational Institutions - Pensionnat de Jeunes Filles at Puducherry

1 Code No. 2.6.1

Earth work in excavation by mechanical

means (Hydraulic excavator)/ manual

means over areas (exceeding 30 cm in

depth, 1.5m in width as well as 10sqm on

plan) including getting out and disposal of

excavated earth, lead upto 50m and for all 89.00 cum 189.77 16,890.00

lift as per direction of Engineer-in-charge

by in charge - all kinds of soil

2 Code No. 2.25

Filling available excavated earth (excluding

rock) in trenches, plinth, sides of

foundations etc. in layers not exceeding

20cm in depth, consolidating each 713.00 cum 169.88 1,21,124.00

deposited layer by ramming and watering,

lead upto 50m and all lift

3 Code No. 2.31

Clearing jungle including uprooting of rank

vegetation, grass, brush wood, trees and

saplings of girth upto 30cm measured at a

height of 1m above ground level and 325.00 sqm 16.65 5,411.00

removal of rubbish upto a distance of 50 m

outside the periphery of the area cleared

4 Code No. 2.36

Extra for levelling and neatly dressing of

disposed soil completely as per direction of

Engineer-in-charge 250.00 sqm 76.82 19,205.00

5 Code No. 4.1.3

Providing and laying in position cement

concrete of specified grade excluding the

cost of centering and shuttering - all work

upto plith level - 1:2:4 (1 cement : 2 fine 8.00 cum 7,608.37 60,867.00

aggregate : 4 graded stone aggregate 20mm

nominal size)

6 Code No. 4.1.8

Providing and laying in position cement

concrete of specified grade excluding the

cost of centering and shuttering - all work

upto plith level - 1:4:8 (1 cement : 4 fine 8.00 cum 6,537.29 52,298.00

aggregate : 8 graded stone aggregate 40mm

nominal size)

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Description of Items Quantity Unit Rate in Rs. Amount in Rs.

7 Code No. 4.1.10

Providing and laying in position cement

concrete of specified grade excluding the

cost of centering and shuttering - all work

upto plith level - 1:5:10 (1 cement : 5 101.00 cum 6,243.89 6,30,633.00

coarse sand : 10 graded stone aggregate

40mm nominal size)

8 Code No. 4.1.11A

Providing and laying in position cement

concrete of specified grade excluding the

cost of centering and shuttering - all work

upto plith level - 1:5:10 (1 cement : 5 fine 11.00 cum 5,521.89 60,741.00

aggregate : 10 graded brick aggregate

40mm nominal size)

9 Code No. 4.12

Extra for providing and mixing water

per bag

proofing material in cement concrete work

in doses by weight of cement as per 100.00 of 50 12.26 1,226.00

manufacture's specification.

10 Code No. 5.1.2

Providing and laying in position specified

grade of reinforced cement concrete,

excluding the cost of centering, shuttering,

finsishing and reinforcement - All work

upto plinth level 1:1.5:3 (1cement : 1.5 fine 100.00 cum 8,758.18 8,75,818.00

aggregate : 3 graded stone aggregate 20

mm nominal size)

11 Code No. 5.2.2

Reinforced cement concrete work in walls

(any thickness), including attached

pilasters, buttresses , plinth and sting

courses, fillets, columns, pillars, piers,

abutments, posts and struts etc. upto floor

five level excluding cost of centering , 165.00 cum 10,040.74 16,56,722.00

shuttering , finishing and reinforcement -

1:1.5:3 (1 cement : 1.5 fine aggregate : 3

graded stone aggregate 20mm nominal

12 Code No. 5.3

Reinforced cement concrete work in beams,

suspended floors, roofs having slope up to

15degree landings , balconies , shelves,

chajjas , lintels , bands , plain window sills

, staircases and spiral stair cases above

plinth level up to floor five level excluding

the cost of centering ,shuttering, finishing 615.00 cum 10,972.18 67,47,891.00

and reinforcement , with 1:1.5:3 (1 cement

: 1.5 fine aggregate : 3 graded stone

aggregate 20mm nominal size)

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Description of Items Quantity Unit Rate in Rs. Amount in Rs.

13 Code No. 5.9.1

Centering and shuttering including

strutting , propping etc and removal of

form for - foundations, footings, bases of 200.00 sqm 420.93 84,186.00

columns etc for mass concrete

14 Code No. 5.9.2

Centering and shuttering including

strutting, propping etc and removal of form

for - Walls (any thickness ) including

attached pilasters, butteresses, plinth and 90.00 sqm 870.55 78,350.00

string courses etc.

15 Code No. 5.9.3

Centering and shuttering including

strutting, propping etc and removal of form

for - Suspended floors , roofs , landings, 2,320.00 sqm 910.76 21,12,963.00

balconies and access platform

16 Code No. 5.9.5

Centering and shuttering including

strutting, propping etc and removal of form

for - Lintels, beams, plinth beams, girders, 3,045.00 sqm 719.54 21,90,999.00

bressumers and catilevers

17 Code No. 5.9.6

Centering and shuttering including

strutting , propping etc and removal of

form for - Columns , Pillars , Piers , 1,520.00 sqm 996.43 15,14,574.00

Abutments , Posts and Struts

18 Code No. 5.9.7

Centering and shuttering including

strutting , propping etc and removal of

form for - Stairs , (excluding landings)

except spiral -staircases

19 Code No. 5.9.9

Centering and shuttering including

strutting , propping etc and removal of

form for - Arches , domes, vaults upto 6m 120.00 sqm 1,989.76 2,38,771.00

20 Code No. 5.11.1

Extra for additional height in centering ,

shuttering where ever required width

adequate bracing , propping etc. including

cost of de - shuttering and decentering at

all levels , over a height of 3.5m, for every

additional height of 1metre or part thereof 2,760.00 sqm 377.18 10,41,017.00

(plan area to be measured) - Suspended

floors, roofs, landing , beams and balconies

(Plan area to be measured)

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Description of Items Quantity Unit Rate in Rs. Amount in Rs.

21 Code No. 5.16

Providing ,transporting, hoisting and fixing

upto floor five level precast reinforced

cement concrete in shelves including

setting in cement mortar 1:3 (1 cement : 3

fine aggregate) , cost of required centering ,

shuttering and finishing with neat cement

punning on exposed surfaces but excluding

the cost of reinforcement , with 1:1.5:3 (1

cement : 1.5 fine aggregate : 3 graded stone

aggregate 20 mm nominal size)

22 Code No. 5.22.6

Steel reinforcement for R.C.C.work

including straightening , cutting , bending ,

placing in position and binding all complete

upto plinth level - Thermo -Mechanically 14,000.00 kg 114.36 16,01,040.00

treated bars Fe - 500D or more

23 Code No. 5.22.8

Providing anticorrosive treatment to HYSD

reinforcement with fusion bonded epoxy

coating the rate includes cost of

anticorrosive coating including cost of

powder , sand blasting, cleaning ,

induction , heating , depreciation of

machinery etc, wastage in cut length of 43.50 tonne 13,443.92 5,84,811.00

bars , provision of wooden battens between

rows of coated bars , cover to work bush

pins / bar bending machines etc - for bars

of 20mm to 32 mm diametre - conforming

24 Code No. 5.22.9

Providing anticorrosive treatment to HYSD

reinforcement with fusion bonded epoxy

coating the rate includes cost of

anticorrosive coating including cost of

powder, sand blasting, cleaning, induction,

heating, depreciation of machinery etc,

wastage in cut length of bars, provision of

37.00 tonne 18,298.67 6,77,051.00

wooden battens between rows of coated

bars , cover to work bush pins / bar

bending machines etc - for bars of 8mm to

16 mm diametre - conforming to IS 13620 -

25 Code No. 5.22.10

Providing and placing M30 grade cover

block for RCC work all levels 22,400.00 no 2.85 63,840.00

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Description of Items Quantity Unit Rate in Rs. Amount in Rs.

26 Code No. 5.22A.6

Steel reinforcement for R.C.C.work

including straightening , cutting , bending ,

placing in position and binding all complete

above plinth level - Thermo - Mechanically 1,20,000.00 kg 114.36 1,37,23,200.00

Treated bars Fe - 500D or more

27 Code No. 6.1.1

Brick work with common burnt clay F.P.S.

(non modular ) bricks of class designation

3.5 in foundation and plinth in - cement 90.00 cum 9,222.60 8,30,034.00

mortar 1:4 (1 cement : 4 fine aggregate)

28 Code No. 6.4.1

Brick work with common burnt clay F.P.S

(non modular ) bricks of class designation

3.5 in superstructure above plinth level

upto floor five level in all shapes and sizes 4.00 cum 10,899.75 43,592.00

in - cement mortar 1:4 ( 1 cement : 4 fine

aggregate)

29 Code No. 6.4.2

Brick work with common burnt clay F.P.S

(non modular ) bricks of class designation

3.5 in superstructure above plinth level

upto floor five level in all shapes and sizes 940.00 cum 10,661.35 1,00,21,669.00

in - cement mortar 1:6 ( 1 cement : 6 fine

aggregate)

30 Code No. 6.10

Brick work in gauged arches in

superstruture above plinth level and upto

floor five level in cement mortar 1:3 (1

cement : 3 fine aggregate) including

centering and shuttering complete , for 44.00 cum 20,145.53 8,86,403.00

span upto 6 metre with common burnt clay

F.P.S.(non modular) bricks of class

designation 3.5

31 Code No. 6.13.2

Half brick masonry with common burnt

clay F.P.S. (non modular) bricks of class

designation 3.5 in superstructure above

plinth level upto floor V level - cement 110.00 sqm 1,299.18 1,42,910.00

mortar 1:4 (1 cement : 4 fine aggregate)

32 Code No. 6.15

Extra for providing and placing in position

2 nos 6mm dia M.S.bars at every third

course of half brick masonry

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Description of Items Quantity Unit Rate in Rs. Amount in Rs.

33 Code No. 6.20

Tile brick masonry with common burnt clay

F.P.S (non modular) tile bricks of class

designation 10 in plain arch work in

superstructure above plinth and upto floor

five level in cement mortar 1.:4 (1 cement 25.00 cum 17,324.24 4,33,106.00

:4 fine aggregate) including centering and

shuttering complete

34 Code No. 8.10.1

Providing and fixing stone slab with table

rubbed , edges rounded and polished , of

size 75x50 cm deep and 1.8cm thick, fixed

in urinal partitions by cutting a chase of

appropriate width with chase cutter and

embedding the stone in the chase with

epoxy grout or with cement concrete 1:2:4 5.00 sqm 2,208.43 11,042.00

(1 cement : 2 fine aggregate : 4 graded

stone aggregate 6mm nominal size) as per

direction of Engineer-in-charge and

finished smooth - White agaria mable stone

35 Code No. 8.31

Providing and fixing Ist quality ceramic

glazed wall tiles conforming to

IS:15622(thickness to be specified by the

manufacturer), of approved make, in all

colours, shades except burgundy, bottle

green, black of any size as approved, in

skirting, risers of steps and dados, over

12mm thick bed of cement mortar 1:3 (1 240.00 sqm 1,411.68 3,38,803.00

cement : 3 fine aggregate) and jointing with

grey cement slurry @ 3.3kg per sqm,

including pointing in white cement mixed

with pigment of matching shade complete

36 Code No. 9.1.2V

Providing wood work in frames of doors ,

windows, clerestory windows and other

frames , wrought framed and fixed in

position with hold fast lugs or with dash

fasteners of required dia & length (hold fast 6.00 cum 1,70,313.06 10,21,878.00

lugs or dash fastener shall be paid for

separately) -Vengai wood

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Description of Items Quantity Unit Rate in Rs. Amount in Rs.

37 Code No. 9.5.1.2V

Providing and fixing panelled or panelled

and glazed shutters for doors, windows,

and clerestory windows, fixing with butt

hinges of required size with necessary

screws, excluding panelling which will be

paid for separately , all complete as per 275.00 sqm 5,148.42 14,15,816.00

direction of Engineer-in-charge -(Note:-

Butt hinges and necessary screws shall be

paid separately) - Vengai wood - 30 mm

thick shutters

38 Code No. 9.7.1V

Providing and fixing panelling or panelling

and glazing in panelled or panelled and

glazed shutters for doors , windows and

clerestory windows (area of opening for

panel inserts excluding portion inside

grooves or rebates to be measured). 270.00 sqm 4,745.73 12,81,347.00

Panelling for panelled or panelled and

glazed shutters 25 mm to 40 mm thick -

Vengai wood

39 Code No.9.7.7.1

Providing and fixing panelling or panelling

and glazing in panelled or panelled and

glazed shutters for doors , windows and

clerestory windows (area of opening for

panel inserts excluding portion inside

grooves or rebates to be measured).

Panelling for panelled or panelled and 8.00 sqm 2,387.44 19,100.00

glazed shutters 25 mm to 40 mm thick -

Float glass panes - 4mm thick glass pane

(weight not less than 10kg/sqm)

40 Code No.9.12

Extra for providing frosted glass panes 4

mm thick (weight not less than 10 kg per

sqm) instead of ordinary float glass panes

4mm thick (weight not less than 10 kg per

sqm) in doors, windows and clerestory 8.00 sqm 99.59 797.00

window shutters . (Area of opening for glass

panes excluding portion inside rebate shall

be measured)

41 Code No.9.95.1

Providing and fixing ISI marked aluminium

butt hinges anodised (anodic coating not

less than grade AC 10 as per IS : 1868)

transparent or dyed to required colour or 72.00 no 169.08 12,174.00

shade with necessary screws etc.complete -

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Description of Items Quantity Unit Rate in Rs. Amount in Rs.

42 Code No.9.95.3

Providing and fixing ISI marked aluminium

butt hinges anodised (anodic coating not

less than grade AC 10 as per IS : 1868)

transparent or dyed to required colour or 112.00 no 144.04 16,132.00

shade with necessary screws etc.complete -

43 Code No.9.96.1

PProviding and fixing aluminium sliding

door bolts , ISI marked, anodised ( anodic

coating not less than grade AC 10 as per

IS: 1868), transparent or dyed to required

colour or shade , with nuts and screws etc 34.00 no 379.99 12,920.00

complete - 300 X 16 mm

44 Code No.9.100.1

Providing and fixing aluminium handles ,

ISI marked , anodised (anodic coating not

less than grade AC 10 as per IS : 1868)

transparent or dyed to required colour or 196.00 no 79.24 15,531.00

shade, with necessary screws etc, complete

45 Code No.9.101.2

Providing and fixing aluminium hanging

floor door stopper , ISI marked , anodised

(anodic coating not less than grade AC 10

as per IS : 1868) transparent or dyed to

required colour and shade with necessary 72.00 no 101.93 7,339.00

screws etc complete - Twin rubber stopper

46 Code No.9.117.2

Providing and fixing factory made uPVC

door frame made of uPVC extruded

sections having an overall dimension as

below (tolerance +_1mm ), with wall

thickness 2.0 mm (+-0.2mm) , corners of

the door frame to be jointed with

galvanized brackets and stainless steel

screws , joints mitred and plastic welded. 110.00 metre 284.44 31,288.00

The hinge side vertical of the frames

reinforced by galvanized M.S.tube of size

19 x 19 mm and 1mm (+-0.1mm) wall

thickness and 3 nos. stainless steel hinges

fixed to the frame complete as per

manufacturer's specification - Extruded

section profile size 42 x 50 mm

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Description of Items Quantity Unit Rate in Rs. Amount in Rs.

47 Code No.9.118.2

Providing and fixing to existing door

frames - 30 mm thick factory made

Polyvinyl Chloride (PVC) door shutters

made of styles and rails of a uPVC hollow

section of size 60 x 30 mm and wall

thickness 2 mm (+- 0.2 mm) with inbuilt

decorative moulding edging on one side .

The styles and rails mitred and joint at the

corners by means of M.S. galvanised /

plastic brackets of size 75 x 220 mm

having wall thickness 1.0 mm and

stainless steel screws . The styles of the

shutter reinforced by inserting galvanised

M.S.tube of size 25x20 mm and 1mm (+-

0.1mm) wall thickness . The lock rail

made up of 'H' section , a uPVC hollow

section of size 100 x 30 mm and 2 mm (+-

0.2 mm) wall thickness , fixed to the

shutter styles by means of plastic /

galvanised M.S. 'U' cleats. The shutter

frame filled with a uPVC multichambered

single panel of size not less than 620

mm, having overall thickness of 20 mm

and 1 mm (+_ 0.1mm) wall thickness .

They panels

filled vertcally and tie bar at two places by

inserting horizontally 6 mm galvanised

M.S.rod and fastened with nuts and 35.00 metre 3,192.37 1,11,733.00

washers, complete as per manufacturer's

specification

48 Code No.9.165.1B

Providing and fixing of 65 mm Navatal lock

of 7 levers with 3 keys etc complete 46.00 no 711.31 32,720.00

49 Code No.10.25.2

Steel work welded in built up sections/

framed work including cutting,hoisting,

fixing in position and applying a priming

coat of approved steel primer using

structural steel etc. as required - in 13,200.00 kg 172.32 22,74,624.00

gratings, frames, guard bar, ladder,

railings, brackets,gates and similar works

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Description of Items Quantity Unit Rate in Rs. Amount in Rs.

50 Code No.11.4

52 mm thick cement concrete flooring with

concrete hardener topping , under layers

40mm thick cement concrete 1:2:4 (1

cement : 2 fine aggregate : 4 graded stone

aggregate 20mm nominal size) and top

layer 12 mm thick cement hardener

consisting of mix 1:2 (1 cement hardener

mix : 2 graded stone aggregate 6mm 2,300.00 sqm 950.92 21,87,116.00

nominal size) by volume,hardening

compound mixed @ 2 litre per 50 kg of

cement or as per manufacturer's

specification . This includes cost of cement

slurry, but excluding the cost of nosing of

steps etc.complete

51 Code No.11.13.1

Providing and fixing glass strips in joints of

terrazo / cement concrete floors - 40mm 2,800.00 metre 78.55 2,19,940.00

wide and 4mm thick

52 Code No.11.40.1

Providing and laying rectified glazed

ceramic floor tiles of size 300x300 mm or

more (thickness to be specified by the

manufacturer) of 1st quality conforming to

IS:15622 of approved make in all colours ,

shades, except white, ivory, grey, fume red

brown, laid on 20mm thick cement mortar 85.00 sqm 1,488.55 1,26,527.00

1:4 (1 cement : 4 fine aggregate) jointing

with grey cement slurry @3.3 kg per sqm

including pointing the joints with white

cement and matching pigments etc.,

complete

53 Code No.12.15.1

PPainting top of roofs with bitumen of

approved quality @ 17kg per 10 sq.m

impregnated with a coat of fine aggregate at

60cudm per 10 sq.m including cleaning the

slab surface with brushes and finally with 1,450.00 sqm 187.15 2,71,368.00

a piece of cloth lightly soaked in kerosene

oil complete - with residual type petroleum

bitumen of grade VG-10

54 Code No.12.20

Providing and laying pressed clay tiles (as

per approved pattern 18mm nominal

thickness of approved size) on roofs jointed

with cement mortar 1:4 (1 cement : 4 fine

aggregate) mixed with 2% integral water

proofing compound , laid over a bed of 1,450.00 sqm 837.37 12,14,187.00

20mm thick cement mortar 1:4 (1 cement :

4 fine aggregate) and finished neat

complete

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Description of Items Quantity Unit Rate in Rs. Amount in Rs.

55 Code No.12.20L

Lime concrete terracing on roofs of required

thickness laid to fall with 25mm nominal

size brick aggregate and 50% lime mortar

1:2 (1 lime putty : 2 surkhi) rammed and

finished with gur and belgiri treatment 250.00 cum 9,912.26 24,78,065.00

complete including rounding of junctions

with Parapet wall complete

56 Code No.12.22

Making khurras 45x45cm with average

minimum thickness of 5 cm cement

concrete 1:2:4 (1 cement : 2 fine aggregate :

4 graded stone aggregate of 20mm nominal

size) over P.V.C. sheet 1m x1m x 400

micron , finished with 12 mm cement 27.00 no 332.13 8,968.00

plaster 1:3 ( 1cement : 3 fine aggregate)

and a coat of neat cement , rounding the

edges, making and finishing the outlet

complete

57 Code No.12.26.2

Providing and fixing plain mutipurpose

cement board (high pressure steam cured)

with suitable screws for cement particle

board in ceiling etc.complete (frame work to

be paid separately)- 6mmthick Cement 80.00 sqm 924.16 73,928.00

bonded wood particle board as per IS

58 Code No.12.41.2

Providing and fixing on wall face

unplasticised rigid PVC rain water pipes

conforming to IS: 13592 Type A, including

jointing with seal ring conforming to IS :

5382, leaving 10mm gap for thermal 250.00 metre 496.35 1,24,088.00

expansion, (i) Single socketed pipes - 110

mm diameter

59 Code No.12.42.4.2

Providing and fixing on wall face

unplasticised - PVC moulded fittings /

accessories for unplasticised rigid PVC rain

water pipes conforming to IS:13592 Type A,

including jointing with seal ring conforming 25.00 no 362.92 9,073.00

to IS: 5382, leaving 10mm gap for thermal

expansion - Single tee without door -

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Description of Items Quantity Unit Rate in Rs. Amount in Rs.

60 Code No.12.42.4.2

Providing and fixing on wall face

unplasticised - PVC moulded fittings /

accessories for unplasticised rigid PVC rain

water pipes conforming to IS:13592 Type A,

including jointing with seal ring conforming 25.00 no 485.36 12,134.00

to IS: 5382, leaving 10mm gap for thermal

expansion - shoe (plain) - 110mm shoe

61 Code No.12.43.2

Providing and fixing unplasticised - PVC

pipe clips of approved design to

unplasticised- PVC rain water pipes by

means of 50x50x50mm hard wood plugs ,

screwed with M.S. screws of required

length, including cutting brickwork and 200.00 no 451.03 90,206.00

fixing in cement mortar 1:4 ( 1 cement : 4

fine aggregate) and making good the wall

etc., complete -110mm

62 Code No.13.8.3

12 mm cement plaster of mix 1:5 (1 cement

: 5 fine sand) 4,220.00 sqm 333.65 14,08,003.00

63 Code No.13.9.2

Cement plaster 1:3 sand) finished with a

floating coat of neat cement - 20mm 150.00 sqm 568.78 85,317.00

cement plaster

64 Code No.13.9.2A

15 mm cement plaster on the rough side of

single or half brick wall of mix 1:5 (1 3,700.00 sqm 385.39 14,25,943.00

cement : 5 fine aggregate)

65 Code No.13.16.1

6mm cement plaster of mix 1:3 (1 cement

: 3 fine sand) 2,460.00 sqm 283.27 6,96,844.00

66 Code No.13.23.2

Extra for plastering on circular work not

exceeding 6 m in radius - in two coat 680.00 sqm 76.04 51,707.00

67 Code No.13.29.2

18 mm thick plain cement mortar band in

cm per

cement mortar 1:4 (1 cement : 4 fine 14,000.00 9.98 1,39,720.00

aggregate ) - sunk band

68 Code No.13.48.1

Finishing with deluxe multi surface paint

system for interiors and exteriors using

primer as per manufacture's specification -

Two or more coats applied on walls @ 1.25

ltr / 10 sqm over and including one coat of 10,380.00 sqm 173.30 17,98,854.00

special primer applied @ 0.75 ltr / 10 sqm

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Description of Items Quantity Unit Rate in Rs. Amount in Rs.

69 Code No.13.48.2

Painting wood work with deluxe multi

surface paint of required shade. Two or

more coat applied @0.90 ltr / 10sqm over

an under coat of primer applied @ 0.75 ltr 880.00 sqm 159.41 1,40,281.00

/ 10 sqm of approved brand and

manufacure

70 Code No.13.52.1

Finishing with epoxy paint (two or more

coats) at all locations prepared and applied

as per manufacturer's specifications

including appropriate priming coat, 400.00 sqm 253.98 1,01,592.00

preparation of surface , etc.complete - on

steel work

71 Code No.14.35.1

Providing and fixing bright finished brass

hard drawn hooks and eyes -300mm 256.00 no 102.00 26,112.00

72 Code No.14.72

Providing and fixing double scaffolding

system (cup lock type) on the exterior side,

upto seven story hight made with 40 mm

dia .M.S.tube 1.5m centre to centre,

horizontal & vertical tubes joining with cup

& lock system with M.S.tubes, M.S.tube

challies, M.S.clamps and M.S.staircase

system in the scaffolding for working

platform etc. and maintaining it in a

serviceable condition for the required

duration as approved and removing it there

after. The scaffolding system shall be

stiffened with bracings, runners,

connection with the building etc wherever

required for inspection of work at required

locations with essential safety features for

the workmen etc.complete as approved.

The elevational area of the scaffolding shall

be measured for payment purpose. The

payment will be made once irrespective of

duration of scaffolding. (Note: This item to

be used for maintenance work judicically,

necessary deduction for scaffolding in the

existing item to be done)

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Description of Items Quantity Unit Rate in Rs. Amount in Rs.

73 Code No.16.65F

Providing and fixing glazed black board of

required size using 5mm thick plain glass

sheet front face finely ground and fixed in

teak wood (Forest teak) frames of cross

section 100 x40 mm size made to the

specified shape alround fixed with 3 mm

wooden fillets and stiffened at the rear side

with teak wood repers of size 45 x 18 mm

along the height of board at the specified

spacing at 45 cm c/c approximately and

fixing in portion in the wall face with teak 80.00 cum 3,898.72 3,11,898.00

wood plugs and screws at an intervel of 90

cm approximately alround the frame

including the cost of plugs screws etc. The

rate shall also include painting the smooth

face of glass (Rear face of the glass board)

and rear face of frame polishing the frame

(front face ) roughing the front face of glass

black board etc.complete .(Black board

shall be measured internally for the

purpose of Payment)

74 Code No.16.96

Supplying fixing and commisioning of 2 HP

monoblock pumpset slow speed single

phase motor. The rate include the cost of 2.00 no 17,071.64 34,143.00

pumpset , pumpset fixing in position and

test run etc.complete

75 Code No.17.2.2

Providing and fixing white vitreous china

pedestal type water closet (European type

W.C.pan) with seat and lid, 10 litre low

level white P.V.C. flusing cistern, including

flush pipe, with manually controlled device

(handle lever), conforming to IS: 7231,with 4.00 no 6,870.17 27,481.00

all fittings and fixtures complete, including

cutting and making good the walls and

floors wherever required - W.C. pan with

ISI marked black solid plastic seat and lid

76 Code No.17.7.3

Providing and fixing wash basin with C.I.

brackets, 15mm C.P. brass pillar taps, 32

mm C.P.brass waste of standard pattern ,

including painting of fittings and brackets ,

cutting and making good the walls 4.00 no 2,368.70 9,475.00

wherever required - white Vitreous China

wash basin size 550x400 mm with a pair of

15 mm C.P.brass pillar taps

77 Code No.17.13.2

Providing and fixing white vitreous china

water closet squatting pan (Indian type) -

Orissa pattern W.C.pan of size 580x440mm

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Description of Items Quantity Unit Rate in Rs. Amount in Rs.

78 Code No.17.23

Providing and fixing white vitreous china

flat back or wall corner type lipped front

urinal basin of 430x260x350mm or 12.00 no 1,759.80 21,118.00

340x410x265mm sizes respectively

79 Code No.17.28.2.1

Providing and fixing P.V.C. waste pipe for

sink or wash basin including PVC waste

fittings complete - flexible pipe - 32mm dia

80 Code No.17.32.2

Providing and fixing mirror of superior

glass (of approved quality) and of required

shape and size with plastic moulded frame

of approved make and shade with 6mm 4.00 no 1,435.95 5,744.00

thick hard board backing - rectangular

shape 453 x 357 mm

81 Code No.17.69.1

roviding and fixing PTMT waste coupling

for wash basin and sink, of approved

quality and colour - waste coupling 31 mm

dia of 79 mm length and 62 mm breadth 4.00 no 96.40 386.00

weighing not less than 45 gms

82 Code No.17.73.2

Providing and fixing PTMT towel rail

complete with brackets fixed to wooden

cleats with CP brass screws with concealed

fitting arrangement of approved quality and

colour - 600 mm long towel rail with total 4.00 no 816.60 3,266.00

length of645 mm, 78 mm wide and effective

height of 88mm, weighing not less than

83 Code No.17.78.1

Providing and fixing CP brass health faucet

of approved quality - 15 mm nominal bore 4.00 no 1,084.12 4,336.00

84 Code No.18.9.11

Providing and fixing ASTM pipes including

all ASTM plain& brass threaded fittings i/c

fixing the pipe with clamps at 1.00m

spacing . This includes jointing of pipes &

fitting with one step ASTM solvent cement 40.00 metre 270.94 10,838.00

and testing of joints complete (Internal

work exposed on wall ) - 20mm nominal

outer dia pipes

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Description of Items Quantity Unit Rate in Rs. Amount in Rs.

85 Code No.18.9.12

Providing and fixing ASTM pipes including

all ASTM plain& brass threaded fittings i/c

fixing the pipe with clamps at 1.00m

spacing . This includes jointing of pipes &

fitting with one step ASTM solvent cement 60.00 metre 289.43 17,366.00

and testing of joints complete (Internal

work exposed on wall ) - 25mm nominal

outer dia pipes

86 Code No.18.9.13

PProviding and fixing ASTM pipes including

all ASTM plain& brass threaded fittings i/c

fixing the pipe with clamps at 1.00m

spacing . This includes jointing of pipes &

fitting with one step ASTM solvent cement 20.00 metre 342.33 6,847.00

and testing of joints complete (Internal

work exposed on wall ) - 32mm nominal

outer dia pipes

87 Code No.18.9.14

Providing and fixing ASTM pipes including

all ASTM plain & brass threaded fittings i/c

fixing the pipe with clamps at 1.00m

spacing . This includes jointing of pipes &

fitting with one step ASTM solvent cement 30.00 metre 444.90 13,347.00

and testing of joints complete (Internal

work exposed on wall ) - 40mm nominal

outer dia pipes

88 Code No.18.21.2.1

Providing and fixing unplasticised PVC

connection pipe with brass unions - 45 cm

length - 15mm nominal bore 14.00 no 145.35 2,035.00

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Description of Items Quantity Unit Rate in Rs. Amount in Rs.

89 Code No.18.33.1

Constructing masonry chamber 60x60x75

cm inside , in brick work in cement mortar

1.4 (1 cement : 4 fine aggregate) for sluice

valve, with C.I.surface box 100mm top

diameter,160mm bottom diameter and 180

mm deep (inside) with chained lid and RCC

top slab 1:1.5:3 mix ( 1 cement :1.5 coarse

sand : 3 graded stone aggregate 20mm

nominal size), ncluding neceaasry

excavation, foundation concrete 1:5:10 (1 8.00 no 11,891.44 95,132.00

cement : 5 ine sand : 10 graded stone

aggregate 40 mm nominal size) and inside

plastering with cement mortar 1:3 (1

cement : 3 coarse sand) 12mm thick,

finished with a floating coat of neat cement

complete as per standard design: with

common burnt clay F.P.S (non moduar)

bricks of class designation 3.5

90 Code No.18.48A

Providing and fixing rectangular high

density polyethylene water storage loft tank

with cover ISI: 12701 marked, colour of

opaque white or as approved by Engineer-

in-charge. The rate includes making

necessary holes for inlet, outlet & over flow 4,000.00 litre 13.98 55,920.00

pipes. The base support including fittings

and fixtures for tank shall be paid

separately

91 Code No.18.51.1

Providing and fixing C.P.brass long body

bib cock of approved quality conforming to

IS standards and weighing not less than 44.00 no 787.67 34,657.00

690 gms - 15 mm nominal bore

92 Code No.18.53.1

Providing and fixing C.P.brass angle valve

for basin mixer and geyser points of

approved quality conforming to IS: 8931- 8.00 no 448.64 3,589.00

15 mm nominal bore

93 Code No.18.58.2.1

Providing and fixing PTMT grating of

approved quality and colour - rectangular

type with openable cirucular lid - 150mm

nominal size square 100mm diametre of 16.00 no 185.35 2,966.00

the inner hinged round grating

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Description of Items Quantity Unit Rate in Rs. Amount in Rs.

94 Code No.19.33.1

Providing and fixing on wall / column face

unplasticed - PVC including jointing with

seal ring conformation to IS : 5382 leaving

10mm gap for thermal expansion - single

socked pipes - 110mm diametre soil and 50.00 metre 651.83 32,592.00

waste pipes (type - B) conforming to IS :

95 Code No.19.33.1B

Providing and fixing on wall face / column

face unplasticised - PVC moulded fittings /

accessories for unplasticisd - PVC soil and

waste pipes conforming to IS:14735 - 1999

including jointing with seal ring conforming 20.00 no 356.49 7,130.00

to IS :5382 leaving 10mm gap for thermal

expansion - Single tee without door - 110

96 Code No.19.33.1C

Providing and fixing on wall face / column

face unplasticised - PVC mould fittings /

accessories for unplasticisd - PVC soil and

waste pipes conforming to IS : 14735 -

1999 including jointing with seal ring 20.00 no 195.76 3,915.00

conforming to IS : 5382 leaving 10mm gap

for thermal expansion - bend 110 mm

97 Code No.19.33.1D

Providing and fixing on wall face / column

face unplasticised - PVC mould fittings /

accessories for unplasticisd - PVC soil and

waste pipes conforming to IS : 14735 -

1999 including jointing with seal ring 8.00 no 349.40 2,795.00

conforming to IS : 5382 leaving 10mm gap

for thermal expansion - bend with door 110

98 Code No.19.33.2

Providing and fixing on wall / column face

unplasticised - PVC soil and waste pipes

(type B) conforming to IS :13592 - 1992

including jointing with seal ring conforming

to IS : 5382 leaving 10mm gap for thermal 40.00 metre 363.60 14,544.00

expansion - Single socketed pipes 75mm

diameter

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Description of Items Quantity Unit Rate in Rs. Amount in Rs.

99 Code No.19.33.2A

Providing and fixing on wall / column face

unplasticisd - PVC moulded fittings /

accessories for unplasticisd - PVC soil and

waste pipes conforming to IS :14735 -1999

including jointing with seal ring conforming 20.00 no 250.74 5,015.00

to IS : 5382 leaving 10mm gap for thermal

expansion - Single tee with door -

100 Code No.19.33.2B

Providing and fixing on wall / column face

unplasticisd - PVC moulded fittings /

accessories for unplasticisd - PVC soil and

waste pipes conforming to IS :14735 -1999

including jointing with seal ring conforming 8.00 no 218.03 1,744.00

to IS : 5382 leaving 10mm gap for thermal

expansion - Single tee without door -

101 Code No.19.33.2C

Providing and fixing on wall / column face

unplasticisd - PVC moulded fittings /

accessories for unplasticisd - PVC soil and

waste pipes conforming to IS :14735 -1999

including jointing with seal ring conforming 8.00 no 150.67 1,205.00

to IS : 5382 leaving 10mm gap for thermal

expansion - Bend 75 mm

102 Code No.31.168.1I

Providing and fixing in position UPVC

moulded elbow (1 Mpa) conforming to IS

7834 part II and ISI marked,including

labour charges for jointing, jointing 20.00 no 377.23 7,545.00

materials etc,complete - 110mm dia

103 Code No.31.168.1K

Providing and fixing in position UPVC

moulded elbow (0.6 Mpa) conforming to IS

7834 part II and ISI marked,including

labour charges for jointing, jointing 10.00 no 136.80 1,368.00

materials etc,complete - 75mm dia

104 Code No. NPSR - 1

Disposal of building rubbish and

unserviceable dismantled materials upto 5

kms radius the rate include incidental 100.00 cum 160.22 16,022.00

charges and loading for transporation by

mechanical means.

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Description of Items Quantity Unit Rate in Rs. Amount in Rs.

105 Code No. NPSR - 2

Filling in plinth or trenches, under floors,

in areas with Quarry dust including

watering, ramming, consolidating and

dressing, cost and conveyance of all

materials, labour charges, lead, lift etc. 500.00 cum 687.67 3,43,835.00

complete at all levels as directed by the

Engineer-in-charge.

106 Code No. NPSR - 3

Supplying and fixing of cast iron gate with

roller arrangements with curved track as

per design and drawing. The rate to

includes materials, labour and overhead 3,620.00 kg 140.00 5,06,800.00

charges, the work should be done as per

direction of Engineer-in-Charge.

107 Code No. NPSR - 4

Supplying and fixing of C.I manhole cover

with frame to a size of 600mmx 600mm

with G.I coating of approved quality and

hinges with locking arrangements etc., 6.00 no 3,535.61 21,214.00

complete as directed by the Engineer-in-

Charges.

108 Code No. NPSR - 5

Providing and fixing PVC 110mm dia

terminal guard vent cowl etc. complete as

directed by the Engineer-in-charge. 4.00 no 38.09 152.00

109 Code No. NPSR - 6

Providing and fixing 40mm dia UPVC union

of approved quality.

110 Code No. NPSR - 7

Providing and fixing ASTM valve (Ball type)

of approved quality - 20mm nominal bore 12.00 no 205.85 2,470.00

111 Code No. NPSR - 8

Providing and fixing ASTM valve (Ball type)

of approved quality - 25mm nominal bore 8.00 no 233.53 1,868.00

112 Code No. NPSR - 9

Providing and fixing ASTM valve (Ball type)

of approved quality - 40mm nominal bore 8.00 no 467.35 3,739.00

113 Code No. NPSR - 10

Providing and fixing ASTM tank nipple of

approved quality - 40mm nominal bore 2.00 no 160.65 321.00

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Description of Items Quantity Unit Rate in Rs. Amount in Rs.

114 Code No. NPSR - 11

Providing and fixing Padak wood louvered

ventilators for verandha. The allround

frame of ventilator are in the size 75 x

50mm in horizontal required length and

vertical 0.75m height in vertical side of

frame make the arrangements for louvered

plats (80 x 25mm) fixing. The louvered 115.00 sqm 7,687.33 8,84,043.00

portions planks are neatly finished and

fixed in the position of louvered

arrangements complete as per drawings

etc., as directed by the Engineer-in-Charge.

The rate including labour, material etc.,

115 complete.

Code No. NPSR - 12

Providing and fixing of Terracota

ornamental moulded pots of size 18cm

wide and 45cm height as per design and

pattern shown in the architectural

drawings. The pot filled with cement

concrete and 5/8” dia S.S. rod 55 cm long 500.00 no 900.00 4,50,000.00

vertically insert in to the centre of pot. The

set of each pot fixing on brick wall at 30cm

c/c vertically in correct alignment as

directed by the Engineer-in-Charge.

116 Code No. NPSR - 13

Providing and fixing aluminium tower bolts

ISI marked anodised (anodic coating not

less than grade AC 10 as per IS:1868)

transparent or dyed to required colour or 100.00 no 968.70 96,870.00

shade with necessary screws etc., complete

117 Code No. NPSR - 14

Providing and fixing alomunium tower bolts

ISI marked anodised (anodic coating not

less than grade AC 10 as per IS:1868)

transparent or dyed to required colour or 40.00 no 1,110.47 44,419.00

shade with necessary screws etc., complete

118 Code No. NPSR - 15

Providing and fixing MS kodali keel (hinges)

of 300mm height one end fixed in to the

wall with cement concrete 1:2:4 and other 400.00 no 1,212.86 4,85,144.00

end to the door as per drawing given.

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Description of Items Quantity Unit Rate in Rs. Amount in Rs.

119 Code No. NPSR - 16

Providing, hoisting and fixing Padauk wood

sunshade with padak wood scantling. The

vertical wall plate 0.05x0.065x0.80m

height size fixed on wall. The slope frame

0.05x0.07x1.05m length. The cross

support rafter of 0.05x0.065x0.31 fixed

between both rafter. The roof batterns 70.00 sqm 3,641.31 2,54,892.00

0.05x.0.025m size on top as per detailed

drawing excluding cement partical board.

The rate include all material, labour,

necessary scaffolding etc. as directed by

the Engineer-in-charge.

120 Code No. NPSR - 17

Providing and fixing Arch part of the outer

windows in Vengai Wood with coloured

glass as per detailed drawing. The rate

including material, labour, necessary

scaffolding etc. as directed the Engineer-in-

charge.

121 Code No. NPSR - 18

Making cornice to an average size of (20cm

wide and 20cm projection) using brick bats

/ achukkal with cement mortar 1:2 as per

detailed drawing (refer detail-1) and trowel

finish in two layers at an average thickness

of 25mm with c.m 1:4 (one cement : 4 fine

sand) and slightly rounded edges, in

decorative elements like moulding, cornice, 820.00 metre 1,357.00 11,12,740.00

etc. Complete. The rates are inclusive of all

materials labour scaffolding etc. Complete

as directed by the Engineer-in-charge.

122 Code No. NPSR - 19

Providing ornamental works 35 to 40mm

thick to match with the existing design as

per detailed drawing. Using cement plaster

1:2 (1 cement : 2 fine sand) in two coats

under layer 20mm thick plaster and top

layer 15 to 20mm thick plaster cement

mortar 1:2 (1 cement : 2 fine sand) 66.00 no 7,000.00 4,62,000.00

including necessary scaffolding, labour,

materials, curing etc. complete work as per

specifications as directed by the Engineer -

in - charge for verandah circular pillar

capital. (The rate including cost of

matrials, labour and CP etc. complete).

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Description of Items Quantity Unit Rate in Rs. Amount in Rs.

123 Code No. NPSR - 20

Providing FRP manucatured silver grade

shade finished T sections of size 450mm x

250mm with 9mm web thickness and

12mm flange thickness made using of fibre

glass mat, rovings and fire retardant grade

polyester resin and fixing with required

numbers of plastic rivet heads of 30mm

dia at 150mm centre to centre (both flange

and web) including fixing to ceilings / 250.00 metre 9,113.16 22,78,290.00

positions using epoxy adhesives and

anchor bolt of required size and numbers.

The rate shall include cost of materials,

labour, fixing to position, scaffolding,

conveyance and all other incidentals etc.,

complete as per drawings and as directed

by the Engineer-in-Charge.

124 Code No. NPSR - 21

Providing FRP Manufactured teak wood

finished box section of 4mm shell thick,

made up of fibre class mat and fire

retardant grade polyster resin and filled

with rigid PU foam @ 40kg/cum including

fixing to ceilings / positions using epoxy

adhesives and anchor bolt of required size

and numbers . The rate shall include cost 1,380.00 metre 3,019.10 41,66,358.00

of materials, labour, fixing to position,

scaffolding, conveyance and all other

incidentals etc., complete as per drawings

and as directed by the Engineer-in-Charge.

FRP box sections of size 100 x 125mm

Total Civil Works (A) 7,95,43,014.00

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

ABSTRACT OF ESTIMATE

ELECTRICAL WORKS

Sl.No. Description Unit Quantity Rate in Rs. Amount in Rs.

Wiring or light point / fan point / exhaust fan point / call bell point with

1.5 sq.mm FRLS PVC insulated copper conductor single core cable in

surface / recessed medium class pvc conduit, with modular

1 switch, modular plate, suitable GI box and earthing the point with 1.5 Point 684.00 590.15 4,03,663.00

sq.mm FRLS PVC insulated copper conductor single core cable

etc.as required - GROUP C (For Light Points Only)

Wiring for twin control light point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed

medium class PVC conduit, 2 way modular switch, modular

2 Point 10.00 635.69 6,357.00

plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable etc.as required. (For

Light Points Only)

Wiring for group controlled (looped) light point / fan point /

exhaust fan point / call bell point (without indepdent switch etc.)

with 1.5 sq.mm FRLS PVC insulated copper conductor single

3 Point 178.00 337.79 60,127.00

core cable in surface / recessed PVC conduit, and earthing the

point 1.5 sq.mm FRLS PVC insulated copper conductor single

core cable etc.as required - Group C (For Light Points Only)

Wiring for circuit / submain wiring alongwith earth wire with the

following sizes of FRLS PVC insulated copper conductor, single core

4 Meter 1,676.70 91.00 1,52,580.00

cable in surface / recessed medium class PVC conduit as required - 2 X

1.5 sq.mm + 1 x 1.5 sq.mm earth. (For Fan Points)

Wiring for circuit / submain wiring alongwith earth wire with the

following sizes of FRLS PVC insulated copper conductor, single core

5 Meter 3,443.00 108.13 3,72,292.00

cable in surface / recessed medium class PVC conduit as required -

2 X 2.5 sq.mm + 1 x 2.5 sq.mm earth

Wiring for circuit / submain wiring alongwith earth wire with the

following sizes of FRLS PVC insulated copper conductor, single core

6 Meter 804.00 129.35 1,03,997.00

cable in surface / recessed medium class PVC conduit as required - 2X 4

sq.mm + 1 x 4 sq.mm earth wire

Wiring for circuit / submain wiring alongwith earth wire with the

following sizes of FRLS PVC insulated copper conductor, single core

7 Meter 369.00 174.11 64,247.00

cable in surface / recessed medium class PVC conduit as required - 2 X

6 sq.mm + 1 x 6 sq.mm earth wire

Wiring for circuit / submain wiring alongwith earth wire with the

following sizes of FRLS PVC insulated copper conductor, single core

8 Meter 230.00 214.67 49,374.00

cable in surface / recessed medium class PVC conduit as required - 2 X

10 sq.mm + 1 x 6 sq.mm earth wire

Supplying and fixing of following sizes of medium class PVC

conduit along with accessories in surface / recess including cutting the

9 Meter 44.09 60.44 2,665.00

wall and making good the same in case of recessed conduit as required -

Supplying and fixing 3 pin, 5 A ceiling rose on the existing

10 junction box / wooden block including connection etc as required. Point 493.00 39.74 19,592.00

Supplying and fixing following size / modules, GI box alongwith

11 modular base & cover plate for modular switches in recess etc. as No. 21.00 140.39 2,948.00

required - 1 or 2 module (75mm x 75mm)

Supplying and fixing following size / modules, GI boxalongwith modular

12 base & cover plate for modular switches in recess etc. as required - 4 No. 5.00 167.22 836.00

module (125 mm x 75 mm)

Supplying and fixing following size / modules, GI box alongwith

13 modular base & cover plate for modular switches in recess etc. as No. 39.00 205.20 8,003.00

required - 6 module (200 mm x 75 mm)

Supplying and fixing following size / modules, GI box alongwith

14 modular base & cover plate for modular switches in recess etc. as No. 20.00 235.40 4,708.00

required - 8 module (125 mm x 125 mm)

Supplying and fixing following size / modules, GI box alongwith

15 modular base & cover plate for modular switches in recess etc. as No. 48.00 275.64 13,231.00

required - 12 module (125 mm x 125 mm)

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Sl.No. Description Unit Quantity Rate in Rs. Amount in Rs.

Supplying and fixing following modular switch / socket on the existing

16 modular plate & switch box including connections but excluding No. 556.00 47.78 26,566.00

modular plate etc. As required - 5/6 A switch

Supplying and fixing following modular switch / socket on the existing

17 modular plate & switch box including connections but excluding No. 73.00 85.11 6,213.00

modular plate etc. As required - 15/16 A switch

Supplying and fixing following modular switch / socket on the existing

18 modular plate & switch box including connections but excluding No. 65.00 69.65 4,527.00

modular plate etc. As required - 3 pin 5/6 A socket outlet

Supplying and fixing following modular switch / socket on the existing

modular plate & switch box including connections but excluding

modular plate etc. as required - 6 pin 15/16 A socket outlet

(If Required)

Supplying & fixing suitable size GI box with modular plate and cover in

front on surface or in recess including providing and fixing 25 A

20 Point 10.00 392.84 3,928.00

modular socket outlet and 25 A modular SP MCB, "C" curve

including connections, painting etc .as

Supply of 4 x 16sqmm PVC sheathed armoured aluminium U.G

21 Meter 135.00 139.20 18,792.00

cable - 1.1 KV grade. Make:Finolex/Polycab

Supply of 4C x 25 sqmm PVC sheathed armoured aluminium U.G cable-

22 Meter 48.00 185.60 8,909.00

1.1 KV grade. Make:Finolex/Polycab

Supplying and making end termination with brass compression

gland and aluminium lugs for following size of PVC insulated and

23 Meter 90.00 290.00 26,100.00

PVC sheathed / XLPE aluminium conductor cable of 1.1 kV

grade as required - 4 X16 sq.mm (28 mm)

Supplying and making end termination with brass compression

gland and aluminium lugs for following size of PVC insulated and

PVC sheathed / XLPE aluminium conductor cable of 1.1 kV

grade as required - 4 X16 sq.mm (28 mm)

Supplying and making end termination with brass compression gland

and aluminium lugs for following size of PVC insulated and PVC

sheathed / XLPE aluminium conductor cable of 1.1 kV grade as

required - 4 X50 sq.mm (35 mm)

Laying of one number PVC insulated and PVC sheathed / XLPE power

cable of 1.1 kV grade of following size direct in ground including

26 Meter 225.00 263.59 59,308.00

excavation, sand cushioning, protective covering and refilling the trench

etc.as required - Upto 35 sq.mm

Laying of one number PVC insulated and PVC sheathed /

XLPE power cable of 1.1 kV grade of following size direct in

27 ground including excavation, sand cushioning, protective covering Meters 90.00 361.21 32,509.00

and refilling the trench etc.as required - above 35 sq.mm and upto 95

Providing, laying and fixing following dia RCC pipe NP2 class (light

duty) in ground complete with RCC collars, jointing with cement mortar

28 Meters 66.00 352.37 23,256.00

1:2 (1 cement : 2 fine sand) including trenching (75cm deep) and

refilling etc.as required - 100mm Dia

EARTHING

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including

29 accessories, and providing masonry enclosure with cover plate Set 5.00 5,815.97 29,080.00

having locking arrangement and watering pipe etc. with charcoal / coke

and salt as required

Providing and fixing 25mm x 5mm GI.strip on surface or in recess for

connections etc . as required

Providing and fixing 4.00 mm dia copper wire on surface or in recess for

loop earthing as required

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Sl.No. Description Unit Quantity Rate in Rs. Amount in Rs.

Supply, installation, testing and commissioning of 415V

metering panel board fabricated with 14G CRCA sheet steel, powder

coated with siemens gray (RAL7032 IS-5) after seven tank process,

complete with aluminium bus bars (the clearence shall not less than 25

mm for phase-phase and 19mm for phase-neutral/earth), 3.15mm

sheet steel or 40x40x6mm MS angle for load bearing members, lifting

hooks, MS base frame of 75mm height incomers and outgoing

switchgear as below. The item including cost of supply and fixing of 3-

phase energy meters, necessary sealing arrangements, 25x3mm GI

earthing throughout the bottom length, 6 sq.mm FRLS copper wire inter

connections for compartment earthing, complete copper control

wiring with crimping type ferrules, copper lugs, proper engravation

sheet to be fixed on each outgoing etc. Also the cost inclusive of

32 minor civil works and providing necessary, support structure/frames Set 1.00 23,462.00 23,462.00

with painting as required for erection. All complete as per specifications,

drawing and/or as required by CEA/PED. The contractor shall submit

general arrangement & control wiring drawings and get approval

from site Engineer/Consultant before commence the fabrication works.

Note: panels costing should be as per sld & with respect to PED

standards.

Metering Panel-1 : 1 Sets each comprising of:

a) 100A TPN Fuse cut outs with neutral link.

b) Provision for Three phase Energy meter as per PED

requirement.

c) 100A FP MCB (C - curve 10KA)

MAIN PANEL

Incomer :

100A 4P on-load manual change over switch with control MCB's,

33 MFn meter and phase indications etc. - 1 No. Set 1.00 84,348.00 84,348.00

100A FP MCCB - 1 No

Outgoings :

a) 63A FP MCB (C - curve 10KA) - 7 Nos

DISTRIBUTION BOARD:

Supplying and fixing following way, horizontal type three pole and

neutral, sheet steel, MCB distribution board, 415 V, on surface /

34 recess, complete with tinned copper bus bar, neutral bus bar, earth bar, Each 7.00 2,123.28 14,863.00

din bar, Interconnections, powder painted including earthing etc.

as required (but without MCB / RCCB / Isolator ) 6way (4+18), double

DISTRIBUTION BOARD:

Supplying and fixing following way, single pole and neutral, sheet

steel, MCB disribution board, 240 V, on surface / recess, complete with

35 tinned copper bus bar, neutral bus bar, earth bar, din bar, Each 3.00 2,550.57 7,652.00

interconnections, powder painted including earthing etc. as required

(But without MCB / RCCB / Isolator) - 8 way (4+24), double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve,

miniature circuit breaker suitable for inductive load of following

36 poles in the existing MCB DB complete with connections, Each 126.00 120.48 15,180.00

testing and commissioning etc. as required. - Single Pole

Supplying and fixing following rating, double pole, (single phase

and neutral), 240V, residual current circuit breaker (RCCB), having a

37 sensitivity current 30 mA in the existing MCB DB complete Nos. 12.00 1,487.66 17,852.00

with connections, testing and commissioning etc as required - 40

Supplying and fixing following rating, double pole, (single phase

and neutral), 240V, residual current circuit breaker (RCCB), having a

38 sensitivity current 30 mA in the existing MCB DB complete Nos. 15.00 1,797.57 26,964.00

with connections, testing and commissioning etc as required -

Supplying and fixing following rating, four pole, 415 V, isolator in the

39 existing MCB DB complete with connections, testing and Nos. 5.00 208.46 1,042.00

commissioning etc.as required - 40 A

Supplying of 1200mm sweep double ball bearing ceiling fan Make:

Almonard/Usha

41 Stepped type Modular Fan regulator (2 module) Nos. 130.00 213.40 27,742.00

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST

Sl.No. Description Unit Quantity Rate in Rs. Amount in Rs.

Supplying and fixing extra down rod of 10 cm length G.I.pipe, 15 mm

dia, heavy gauge including painting etc . As required. (Note: More than

5 cm length shall be rounded to the nearest 10 cm and 5 cm or

less shall be ignored)

Installation testing and commissioning of ceiling fan/wall

mounting fan and wiring the down rod of standard length .(upto

30cm) with 14/.86mm Plastic insulated twisted Copper wire

including earthing as required:

Supply of 300mm 1400 rpm heavy duty exhaust fan

Make:Almonard/Orient/Usha

Installation of exhaust fan in the existing opening, including

45 making good the damage, connection, testing,commissioning etc. Nos. 10.00 215.62 2,156.00

as required - Upto 450 mm sweep

Installation, testing and commissioning of wall bracket / ceiling fittings

of all sizes and shapes containing upto two GLS / CFL /LED lamps per

fitting. Complete with all accessories including connections etc as

required.

Fixing Step type socket Fan Regulator on the existing switch box/cover

including connections etc. as required.

Supply and Fixting of 20W LED tube light fitting Make: Philips / Bajaj /

Supplying and fixing of 230V, 1 x 18W LED wall mounted light fitting

49 with suitable 18W LED lamp and necessary fixing accessories as Nos. 63.00 350.00 22,050.00

required. Make: Philips/Bajaj

Supplying and fixing of 1 x 10 LED 2' Washbasin light fittings with

50 suitable 10W LED lamp and necessary fixing accessories as required. Nos. 6.00 1,450.00 8,700.00

Make: Philips/Bajaj

Supplying and fixing of 230V, 1 x 20W LED Wall bracket

51 mounted type light fitting with suitable 20W LED lamp and Nos. 22.00 3,717.00 81,774.00

necessary fixing accessories as required. Make: Philips/Bajaj

Total Electrical Works (B) 22,72,831.00

TOTAL CIVIL & ELECTRICAL WORKS : (A) + (B) 8,18,15,845.00

Digitally signed by DEEPAK

KUMAR MEHRA

Date: 2025.02.25 16:00:51 IST