REPAIRS TO SEWAGE LINE, MANHOLES, CLEANING OF SEWAGE LINE AND SEPTIC TANKS, DRAINAGE, COMPOUND WALL, GATE FENCING, PATH, HARD STANDING AND MISC WORKS AT DGQA AREA OF AGE B/R (SOUTH) NO. II UNDER GE (SOUTH) SECUNDERABAD

Amount

Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation etc or for manholes / Septic Tank/Sockage well etc area n.exc. 10 Sq.m on plan and n.exc 1.5m in depth getting out in hard/dense soil. complete all as specified and as directed.

Excavation in trenches n.exc. 1.5 m wide and exceeding 1.5 m but n.exc 3.00 m.in depth for foundation etc or for manholes/ Septic Tank/Sockage well etc area n.exc. 10 Sq.m on plan etc complete all as specified and as directed.

Returning, filling in with approved soil obtained from excavation including spreading levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed.

Removing the excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

Demolition and breaking up or taking up drain pipe (salt glazed stone ware, AC or reinforced concrete ) set in cement mortar, 100 mm dia complete all as specified and as directed..

Demolition and breaking up or taking up drain pipe (salt glazed stone ware, AC or reinforced concrete ) set in cement mortar, 150 mm dia complete all as specified and as directed.

Demolition and breaking up or taking up drain pipe (salt glazed stone ware, AC or reinforced concrete ) set in cement mortar, 200 mm dia complete all as specified and as directed.

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) for 100mm dia pipe complete all as specified and as directed.

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) for 150mm dia pipe complete all as specified and as directed.

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate)for 200mm dia pipe complete all as specified and as directed.

M&L SWG drain pipe grade 'A' of 100 mm internal dia laid in trenches and jointed in cement mortar complete complete all as specified and as directed.

M&L SWG drain pipe grade 'A' of 150 mm internal dia laid in trenches and jointed in cement mortar complete all as specified and as directed.

M&L SWG drain pipe grade 'A' of 200 mm internal dia laid in trenches and jointed in cement mortar complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) smooth finished, and reforming benching as required for 100 mm internal dia of pipe.complete all as specified and as directed.

M&L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) smooth finished, and reforming benching as required internal dia of pipe 150mm complete all as specified and as directed.

Cutting into existing manholes for removing existing branch drain, making good to walling and rendering, cutting out branch channel, and making good benchings for internal dia of pipe 150 mm complete all as specified and as directed.

Cutting into existing manholes for removing existing branch drain, making good to walling and rendering, cutting out branch channel, and making good benchings for internal dia of pipe 200 mm complete all as specified and as directed.

Cleaning of shurbs /bushes arround the septic tank, filter bed, manholes and along the sewage line complete all as specified and as directed.

M&L Cleaning of all blockage of any type of sewage line i.e branch sewer line, main sewer line etc, manholes of any section and depth, any situation by way of cleaning/disludging manholes by using any type of manually,mechanically or by way of any other suitable means including foreign materials as well as rodding of sewer lines and between successive from block manholes where required and ordered by Engineer-in-charge and keeping the sewage line functional cleaning trap,water closet,soil waste/vent pipe,gully traps upto final drop out let into septic tanks or central sewage system treatmenting in other adjoining Zone/Area of into sewage well (working in foul condition with taking precautionary measures) equipment as required or applicable all as specified and directed. manholes of any size and depth and removing the sludge/material and depositing outside the MOD land complete all as directed by Engr-in-Charge. NOTE : Two person with one supervisor working under cell in charge JE in all working days from 08.30 Hrs to 16.30 Hrs with necessary T&P.

Mechanically pumping out sewage water from Septic tanks/sump well where required and as directed with taking precautionary measurer including tools & plants as required and removing to place out side MD land from the site complete(working in foul condition) all as specified and as directed.

Cleaning and de-sludging of existing septic tanks/ deep manholes up to 3 metre deep including taking out sludge in any form alongwith all other foreign materials by mechanical equipment or manually or by way of any other suitable means including removal of sludge and other foreign materials out side the MD land by any means complete(working in foul condition) all as specified and as directed.

All as per item No 21 above but depth exe 3mtr and not exe 6 mtr complete all as specified and as directed.

Removal of filter media including sludge as deposited by excavating in foul position from filter beds etc any depth or width and getting out complete all as specified and as directed.

Supply and loose filling with broken stone aggregate of gauge 40 to 80mm as filter media in filter beds, soak pits etc complete all as specified and as directed.

Supply and loose filling with broken stone aggregate of gauge 20mm as filter media in filter beds, soak pits etc complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required 100mm dia complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, bore of the pipe 110 mm complete all as specified and as directed.

S&F PVC(SWR) bends any radius 110 mm bore provided with access door.complete all as specified and as directed.

M&LPVC (SWR) gully trap I25/110 mm, setting and jointing wilh solvent cement complete complete all as specified and as directed.

Demolition of brick/stone masonry work built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed..

M&L Brick work with Fly Ash bricks straight or curved on plan exc 6M mean radius built in CM 1:6 as in manhole etc.complete all as specified and as directed.

All as per Sl item No: 32 above but except bricks including removing the mortar & cleaning complete all as specified and as directed

M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) in landings, cover slabs (for manhole etc) including necessary form work and set in CM (1:4). complete all as specified and as directed. Note:- Reinforcement shall be measured and paid separate

S&F MS TMT bars 10 mm dia and over for reinforcement etc, cut to length, bent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

All as per Sl item No: 35 above but 6 to 8 mm dia .

Supply only integral water proofing compound.

Demolition of cement concrete in ground floors and pavings n. exc. 15 cm thickness (below or above ground level).complete all as specified and as directed.

M&L 40 mm thick PCC 1:2:4, type B1, using 20 mm graded stone aggregate as in floors finished even and smooth with using extra cement complete all as specified and as directed.

M&L Hardcore broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.complete all as specified and as directed.

M&L PCC 1:4:8, type D2, using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

M&L 75mm thick PCC 1:3:6 type C1 by using 20mm graded aggregate, as in plinth protection/paths etc laid in pannels including finished the surface smooth and even without using extra cement. complete all as specified and as directed.

M&L PCC type B1 1:2:4 (20mm graded stone aggregate) as in lintels upto 1.5 mtr clear span, cills, steps; seismic and other similar bands, copings, bed plates, kerbs etc. including necessary form work. complete all as specified and as directed.

M&L for broken Glass coping on top of wall in CM (1:3) 25mm thick with 10.0 Kg/Sqm Glass complete all as specified and as directed.

M & L 25mm thick Cement concrete type B-1. 1:2:4 (20 mm graded stone aggregate) as in sub-floors, sub-bases, floors and pavings, etc. complete all as specified and as directed.

M&L 15mm thick screed bed in cm 1:4 for laying floor finishes complete all as specified and as directed .

M&L Chequered cement concrete tiles of size 30 cm x 30 cm x 20-22 mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed.

Dismantling posts/struts (wood, steel or RCC) any section including taking out embedded portion from concrete,brick work, masonry etc and making good disturbed ground complete all as specified and as directed .

Dismantling structural steel work incl doors, gates but exe framed truss etc complete all as specified and as directed. by Engineer-in-Charge

Dismantling fencing wire mesh, any type and in any position complete all as specified and as directed.by Engineer-in-Charge.

Excavation in post holes (or similar holes) each n exc 0.50 Cum getting out in soft/loose soil, returning, filling in and ramming including watering earth or broken rubble mixed with earth around, in layers n exc 25cm and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and as directed.

Fixing only chain link fencing including line wires any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and as directed.

Supply only chain link M S galvanised fencing any size or type.

S & F Mild steel screw bolts (Machine made) with hexagoanal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 11 to 15 mm dia of neck, exc 10 cm and n exc 15 cm long complete all as specified and as directed.

Supply only MS round bars of 10mm dia as in line bars conforming to Fe 290 Grade E-165.complete all as specified and as directed.

S&F Galvnised 2 strand, steel barbed wire 2.24 mm dia of barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straighting bolts, including securing or tying at crossing with and provn of galvnised MS wire, staples or steel pins, etc. as directed (Each line wire to be measured including dismantling old wire complete all as specified and as directed.

S&F Mild steel as in joist, channel, angle,Flat Iron ( Fencing Post) or tee sections, fixed independently, without connecting plates, etc Fe-410-W (Gde E-250) quality 'A' complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging: also fastening and fixing complete Fe-290(Gde E-165) all as specified and directed .

M&L Preparation of new steel surfaces of any description not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Taking down cement plastering on brick/stone wall etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished the surface even and smooth w/o using extra cement complete all as specified and as directed.

M&L Rendering 15mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished the surface even and fair complete all as specified and as directed.

M&L providing Pre-cast cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in 40mm thick jallies and louvers etc of design & pattern as directed with plain faces, including all necessary form work etc and reinforced at 100 mm c/c both ways with and including 4mm dia MS wire and set in cement mortar 1:4 , incl taking down in batch repairs complete all as specified and as directed.

M/S DIVIJA BUILDERS

LAKSHMI ENGINEERS

M/S B.SHRAVAN KUMAR

PARDEEP AND CO

M/S V PRATAP REDDY

M/S M.N.Reddy

abhilasha constructions