Re Construction of D R Bridge at RD 150133 of Main Drain No 2

Amount

Earth work excavation i/c all lead, lifts and all other allowances with an avg. lead of 90 mtr. HSR item no. 6.2 ( b) ( C ) I & ii

Rehandling of earth work with an average lead of 15 mtr. HSR item no. 6.2 (b)

Earth work excavation i/c dressing all lead, lifts and all other allowances with an avg. lead of 105 mtr. HSR item No. 6.2 (b) ( C ) I & ii 6.3 (i)

Earth work excavation i/c dressing all lead, lifts and all other allowances with an avg. lead of 232.5 mtr. HSR item No. 6.2, ( B) ( C ) I & ii 6.3 (i)

Preparing watering and ramming surface for laying C.C. in channel in Horizontal as per PWD specification and design and as per direction of engineer incharge HSR 10.122 (b) (i)

Design mix C.C. of grade M-15 with minimum cement contants 240 kg./cum in F&P HSR No. 10.64 A&C slip No. 32 issued on 11/11/19

Design mix C.C. of grade M-25 with minimum cement contants 330 kg./cum in F & P HSR 10.66 A&C Slip No. 30 issued on 25/10/19

Design mix C.C. of grade M-25 with minimum cement contants 330 kg./cum in first story upto 4 mtr. Above plinth level HSR 10.73 A&C slip No. 30 Issued on 25/10/19

Design mix C.C. of grade M-30 with minimum cement contants 340 kg./cum in F & P HSR 10.67. A&C slip No. 30 issued on 25/10/19

Centering and shuttering for slab bottom {HSR 9.18 (b)}exceeding 3 meters but upto 6 meter span

Centering and shuttering for faces of foundation concrete foundation beams etc.(HSR 9.13)

Centering and Steel shuttering for Vertical wall with smooth exposed surface & height above 4 mtr. & note II b (HSR item No. 9.5)

Filling expension joint with betuminious shaltax board (N.S)

Providing and fixing PVC drainage spout ( N.S.)

Providing Weep hole in vertical Wall ( N.S.)

Supply & fixing caution/ sign boards on both side ( N.S.)

Supply and carriage of stone boulder of requisite size from approved quarry to site of work as per PWD Specification No.3.31 read with 23.8 and 23.9 including loading unloading & stacking and rehandling of quantities

Loose dumping of stone HSR item No. 23.39

First class brick work laid in cement sand morter 1:3 in foundation and plinth (HSR 11.5) A&C slip No. 26 issued on 25/10/19

First class brick work laid in cement sand morter 1:3 in super structure (HSR 11.10) A&C slip No. 26 issued on 25/10/19

Extra for making Profile wall as per PWD specification and design and as per direction of engineer Incharge. HSR No. 11.45(a) A&C slip No. 26 issued on 25/10/19

Dismentalling cement masonary 1:4 in foundation and plinth as per PWD specification and design as per engineer Incharge HSR No. 8.5 (b).

Dismentalling RCC 1:2:4 in foundation and plinth of old existing bridge as per PWD specification and design and as per direction of engineer incharge HSR No. 8.5 (f)

Dismentalling of CC plain 1:4:8 as per PWD specification and design as per direction of engineer incharge HSR No. 8.6(b).

Preparation of plastered or concrete surfaces for painting, i/c sand papering the surface, applying one coat of linseed oil and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk mitti including finishing surface to the required finish, complete HSR No. 11.24

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces HSR 16.25

Painting two coats with ready mixed exterior paint in all shades on newly plastered or concrete exterior surfaces HSR 16.26

Finishing walls with exterior decorative cement based paints such as snowcem, robbiacem etc. on new work, two coats to give an even shade HSR 16.61

Preparartion of sub grade including trenches rough dressing of spoils, final dressing of earth to given levels and chamber, watering, rolling withroad roller and compacting the bed. HSR item No. 24.1

Making and filling expansion joints with bituminous filler ( bitumen 40 percent asbestos 5 percent and sand 55 percent), 12 mm wide as per HSR item No. 24.34

Sand filling behind pucca structure as per PWD specification and design and as per direction of Engineer-incharge Complete rate

Dry brick on edge paving sand groudted over 50mm thick and mud plaster. HSR item No. 14.20

Dismentalling dry brick work as per PWD specification and design as per direction of engineer incharge HSR No. 8.5(i).

Steel Reinforcement TMT bars fe-500 EQR/fe-500D TMT bars for R.C.C. works I/C bending binding and placing in position (FE 500, TMT Steel bars) of TISCO, SAIL,RINL or IISCO (HSR 18.22) A&C slip No. 29 issued on 25/10/19

First class brick work laid in cement sand morter 1:6 in foundation and plinth HSR No. 11.2 A&C slip No. 26 issued on 25/10/19

Supply & laying RCC NP3 hume pipe 1200mm dia HSR No. 29.96

Removing of RCC NP3 hume pipe 1200mm dia HSR No. 8.35 (c)

Supply and laying of E.C. Bags including stiching as per PWD specification HSR No. 23.27.

Credit Brick bats

Credit Old steel

Credit RCC NP3 Hume Pipe

Naveen

VIJAY CONTRACTOR

THE SIWARA LAXMI COOP LC SOCIETY LTD

NARENDER MALIK

meharchand