Loading…
Loading…
Updated dates
Tender Value
₹3.1 Cr
EMD Value
₹3.9 L
Closing Date
17 Jun 2026, 6:00 pm
CHIEF ENGINEER RND SECUNDERABAD
CHIEF ENGINEER RND SECUNDERABAD PICKET OPP JUBILEE BUS STATION SECUNDERABAD 500003
PROVISION OF SECURITY WALL AND WATCH TOWER IN NEWLY ACQUIRED LAND TO ENCLOSE AREAS AT NMRL AMBERNATH
2026_MES_756245_1
81406
Open Tender
Civil Works
365 days
PASHAN PUNE
Class A
category a(i)
8 documents required · 8 mandatory
₹2,000
GARRISON ENGINEER I RND PASHAN PUNE
₹3.9 L
Yes
13 Mar 2026
13 Mar 2026
19 Jun 2026
13 Apr 2026
17 Jun 2026
10 Jun 2026
Schedule 'A' Part - I BUILDINGS & STRUCTURES This Schedule contains Sl item No. 1.01 which is not prepriced by MES and the prepriced rate indicated in Col - 5 as `0.00 indicates this fact only. The tenderer is required to quote their rates in Column 6.
Lumpsum price worked out by the contractor for Construction of Watch Tower with Rest Room ground + 2 storeys in RCC framed structure with RCC roof including all fittings and fixtures complete all as specified and as shown on drawings.
Lumpsum price worked out by the Contractor for "SITE CLEARANCE AND DEVELOPMENT” as listed in Schedule ‘A’ Part - II representing _______% ___________ percent Above / Below the lumpsum price of `11,91,694.66 inserted by the MES in Schedule ‘A’ Part - II
Lumpsum price worked out by the Contractor for “ PATH / HARDSTANDING” as listed in Schedule ‘A’ Part - III representing _______% ____________ percent Above / Below the lumpsum price of `16,48,422.22 inserted by the MES in Schedule 'A' Part - III
Lumpsum price worked out by the Contractor for “SEWAGE DISPOSAL” as listed in Schedule ‘A’ Part - IV representing __________ % ___________________ percent Above / Below the lumpsum price of `66,466.60 inserted by the MES in Schedule ‘A’ Part - IV
Lumpsum price worked out by the Contractor for “FENCING / COMPOUND WALL / GATE” as listed in Schedule ‘A’ Part - V representing _______ % _______________ percent Above / Below the lumpsum price of `2,42,16,940.89 inserted by the MES in Schedule ‘A’ Part - V
Lumpsum price worked out by the Contractor for “INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part - VI representing ______% _____________ percent Above / Below the lumpsum price of `22,379.80 inserted by the MES in Schedule ‘A’ Part - VI
Lumpsum price worked out by the Contractor for “INTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part - VII representing __________% _______________ percent Above / Below the lumpsum price of `74,621.00 inserted by the MES in Schedule ‘A’ Part - VII
Lumpsum price worked out by the Contractor for “EXTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part - VIII representing ______ % _________________ percent Above / Below the lumpsum price of `74,545.83 inserted by the MES in Schedule ‘A’ Part - VIII
Lumpsum price worked out by the Contractor for “EXTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part - IX representing ______ % _________________ percent Above / Below the lumpsum price of `37,924.00 inserted by the MES in Schedule ‘A’ Part - IX
Schedule 'A' Part - X This Schedule is not prepriced by MES and the prepriced rate indicated in Col - 5 as `0.00 indicates this fact only. The tenderer is required to quote their rates in Column 6. This Schedule constitutes Sl. Item Nos. 11 to 45
SEWAGE DISPOSAL S&F, septic tanks 10 users of LLDPE type complete all as specified and directed.
FENCING / COMPOUND WALL / GATE M&L for broken glass coping at 10Kg of glass per sqm on top of wall including embedded in 25mm thick in cement mortar 1:3 complete all as specified and directed.
M&L for Hand packing (any thickness) at back of walls over arches and raising (or lowering) to the required level using broken stone boulders duly filling the cavities by hand packing with smaller stones and finally filling the voids with sand / stone dust and lime in the ratio of 4:1 complete all as specified and directed.
M&L for Hand packing (any thickness) at back of walls over arches and raising (or lowering) to the required level (size of stone 60mm to 40mm) complete all as specified and directed.
M&L for Hand packing (any thickness) at back of walls over arches and raising (or lowering) to the required level (size of stone 20mm to 12.5mm) complete all as specified and directed.
S&F, 25mm thick pre-formed filler board for expansion joints / crumple joints of columns / compound wall complete all as specified and directed.
INTERNAL ELECTRIFICATION S&F, LED decorative box type light fitting 1 x 20W, 4 ft, 220V, with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S&F, LED decorative box type light fitting 1 x 9/10 W, 2 ft, 220 V, with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S&F, LED street light fittings 35watt, 230volts, outdoor type high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP-66 protection and GI pipe 1.5m bend to shape to fix in wall through proper clamps, nuts, bolts with washers connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S&F, exhaust fan, 250mm sweep made of sturdy engineering plastic complete with louvers shutter, voltage 230 volts, 50Hz, 1200 RPM, copper wire complete all as specified and directed.
S&F, electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25 litres BEE 5 star rated complete with all accessories such as safety valve, thermostat, NRV, connection pipes etc., complete all as specified and directed.
EXTERNAL WATER SUPPLY Construction of valve chamber of size 1000mm x 1000mm x 1000mm with PCC solid block masonry 15mm thick PCC foundation 1:4:8, type D2 and 15cm thick hardcore, 200mm thick PCC solid block masonry built in CM 1:6, 15mm thick internal and external plaster CM 1:4, 10 SWG thick MS sheet cover including 40 x 40 x 6mm MS angle frame fixed in coping in PCC 1:2:4, type B1 with locking arrangement and painting with one coat of red oxide and two coat of black bituminous paint complete all as specified and directed.
EXTERNAL ELECTRIFICATION Supply, laying & testing, cable XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35sqmm 4core complete all as specified and directed.
Supply, laying & testing, cable XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16sqmm 4core complete all as specified and directed.
Supply, laying & testing, cable XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10sqmm 2core complete all as specified and directed.
Excavating in trenches not exceeding 1.5m wide and exceeding 1.5m in depth for taking out / laying of LT under ground cables and getting out in soft soil type of earth strata complete all as specified and directed.
Excavating in trenches not exceeding 1.5m wide and exceeding 1.5m in depth for taking out / laying of LT under ground cables and getting out in hard soil type of earth strata complete all as specified and directed.
Excavating in trenches not exceeding 1.5m wide and exceeding 1.5m in depth for taking out / laying of LT under ground cables and getting out in disintegrated rock type of earth strata complete all as specified and directed.
Excavating in trenches not exceeding 1.5m wide and exceeding 1.5m in depth for taking out / laying of LT under ground cables and getting out in hard rock type of earth strata complete all as specified and directed. Note: Blasting is prohibited.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft / disintegrated rock complete all as specified and directed.
Removing surplus excavated rock to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
Supplying & laying, reinforced precast concrete cable cover but class LV, type I, flat, size 250mm x 150mm x 40mm for cable protection complete all as specified and directed.
S&F, tubes, light grade, galvanised, 40mm dia with all fittings laid in trenches or protection to UG cables complete all as specified and directed.
M&L for security light brackets steel tubular pole and suitable fixing for steel tubular pole of single arm bracket length 1.5m long bend to an angle of 120 degree with nuts, bolts and washers complete all as specified and directed.
S&F, pole mounted junction box (street light boxes) sliding type (door fits to base by means of sliding) for 3 phase 4 wire lighting system, moulded in FRP including provision of 02 Nos MCB 16Amps and bus bar insulator - 04 Nos with nut & bolts with fixing arrangement, outdoor type of dimensions 295 x 255 x 120mm (H x W x D). Make: Sintex Product code GS - JB- 2520 or equivalent make as approved by GE.
S&F, LED street light fitting 90 watt for operating voltage between 110V to 320V system efficiency not less than 120 lumen / watt, PF-0.95 minimum, IP66 protection, 5700 CCT (K), CRI between 80-85, confirming to LM79 & LM 80 standards or as per IS-16104:2012 & IS-16106:2012 for estimated life span of minimum 50,000 hrs consisting of high / low voltage cut off, maintenance free isolated electronic driver circuits, low THD, PMMA grade high quality transmittance lens, epoxy powder coated die cast aluminium housing with LED street optics LENS for uniform light distribution, weather proof gasket for lamp & driver compartment, heat resistance toughened UV stabilized
glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting complete all as specified and directed.
S&F, copper flexible cable PVC insulated, unsheathed 3 core multistranded of size 1.5sqmm from junction box to street light fitting complete confirming to 1100 volt confirming to IS:694 complete all as specified and directed.
Supply, installation, testing & commissioning of outdoor LT feeder pillar box CPRI approved cubical with kiosk type made of 3mm thick outdoor type with IP 54 grade of protection CRCA sheet, powder coated, with support of 50mm x 50mm x 6mm angle iron bottom frame with double hinged front openable shutters of each feeder control unit with locking arrangement in front and back openable inspection doors, PVC coloured sleeved aluminium bus bar of capacity 200Amp - 04 Nos for each phases and neutral fixed on suitable insulator all housed in suitable
Providing and laying GI wire 4mm dia from earth electrode directly in ground as required complete all as specified and directed.
Supply, fix, connecting & testing of high intensity, LED revolving search light, manually operated, energy saving, long range, 250W, beam range 700 meters, IP 66, single, LED efficiency > 140 lm/w, PF > 0.95, CCT 5500K - 6500K, Optical grade PMMA / PC lens reflector, efficiency > 95%, multiple circuit to avoid complete run down, narrow beam 7 degree, die cast LM 6 body with air fins, constant current, average lux at 10 meter away 8000 to 9000, working volt 90v - 310v, 50 Hz, working temperature -20 to +60 degree Celsius, confirming to LM79, LM80 and BIS as per IS:10322 / IS:13383. The stand of this search light should be suitable for fixing inside / outside of watch tower cabin.
It is made by steel and suitable for manual rotation of the light on the horizontally (more than 360 degree) and vertically (more than 45 degree) with provision of both locking arrangement at desired position and having PVC castor wheels at bottom for easy movement on platform with wheel locking arrangement. Standard height of tripod stand is 1m above the bottom complete all as specified and directed.
M&L for earthing complete with 600 mm x 60 mm x 6mm thick, galvanized steel earth plate electrode buried vertically in ground (not less than 2.25m deep below normal ground level), with top edge of earth plate not less than 1.5m below ground level connected to and including GI earth strip of size 25mm x 4mm by means of bolts / nuts / check nuts and washers of galvanized steel, GI strip encased in and including 40mm bore GI light grade protection pipe starting from top edge of the earth plate laid in ground / floors fixed on wall GI strip to be connected with LT panel with provision of charcoal dust and common salt all around the earth plate 15cm layers
including necessary excavation and earthwork in any type of soil / strata, provision of concrete earth pit using PCC 1:3:6 type C2 including RCC cover using PCC 1:2:4 type B1 20mm dia GI light grade with wire mesh and tunnel for watering arrangement, complete including testing after completion of earth complete all as specified and directed.
M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles with porcelain insulators or any other indicated situation for loop earthing etc., as required for 25 x 4mm GI strip, complete all as specified and directed.
Please Enable Macros to View BoQ information
Compatibility Report for BOQ_89100 corrected by me.xls
Run on 5/17/2020 18:00
The following features in this workbook are not supported by earlier versions of Excel. These features may be lost or degraded when opening this workbook in an earlier version of Excel or if you save this workbook in an earlier file format.
Significant loss of functionality
Any effects on this object will be removed. Any text that overflows the boundaries of this graphic will appear clipped.
Excel 97-2003
One or more cells in this workbook contain data validation rules which refer to values on other worksheets. These data validation rules will not be saved.
Excel 97-2003
Minor loss of fidelity
Some formulas in this workbook are linked to other workbooks that are closed. When these formulas are recalculated in earlier versions of Excel without opening the linked workbooks, characters beyond the 255-character limit cannot be returned.
One or more objects in this workbook such as shapes, WordArt, or text boxes may allow text to overflow the object boundaries. Earlier versions of Excel do not recognize this option and will hide overflowing text.
Excel 97-2003
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.52 MB
Drawings.rar
Additional Documents • 1.44 MB
81406Tender.pdf
Tender Documents • 2.29 MB
PrepricedSchedules_81406.pdf
Additional Documents • 0.39 MB
BOQ_847089.xls
BOQ • 0.49 MB
Download all tender documents and submit your bid