Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.9 LAccepted-Finance | ₹21.9 L | L1 | Accepted-Finance Qualified in lottery |
| 2 | L2₹21.9 LAccepted-Finance | ₹21.9 L | L2 | Accepted-Finance Disqualified in lottery |
| 3 | L2₹21.9 LAccepted-Finance | ₹21.9 L | L2 | Accepted-Finance Disqualified in lottery |
| 4 | L2₹21.9 LAccepted-Finance | ₹21.9 L | L2 | Accepted-Finance Disqualified in lottery |
| 5 | L2₹21.9 LAccepted-Finance | ₹21.9 L | L2 | Accepted-Finance Disqualified in lottery |
Tender Value
₹25.8 L
EMD Value
₹25,800
Closing Date
25 Nov 2025, 5:00 pmClosed
SE Sambalpur (R and B) Divn-II
SE Sambalpur (R and B) Divn-II
Building works
2025_EICCL_121275_1
SE / R and B / SBP II / 03 (online) / 2025-26
National Competitive Bid
Civil Works - Buildings
90 days
Sambalpur
Please refer Tender documents.
2 documents required · 2 mandatory
₹6,000
₹25,800
Yes
29 May 2026
15 Nov 2025
26 Nov 2025
15 Nov 2025
25 Nov 2025
15 Nov 2025
15 Nov 2025 - 24 Nov 2025
Dismantling brick or stone masonry in clay above 3 m. height including stacking the useful materials for reuse and removing the debris within 50 M. lead etc complete.
Dismantling and removing R.C.C. columns, beams, slab, staircase, landing lintels including stacking the useful materials for reuse and removing the debris within 50m. lead. Etc complete.
R.C.C. work of Grade-M20 in following works using 20mm size & down graded hard black crusher broken granite stone chips of approved quality from approved quarry in specified proportion including hoisting, lowering, laying and compacting concrete, watering and curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour and T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position. Column in Super Structure
Column Superstructure
Lintel Bend
Roof Beam
Roof Slab
Chajja
Straightening bent up or coiled M.S. rod or HYSD steel (Fe-415 / Fe-500), cutting, bending, cranking, hooking, welding or jointing (if required), the M.S. rod or HYSD steel and binding, tying the grills, hoisting, lowering and placing in proper position as per drawing & design required for R.C.C. works including cost, conveyance and taxes of M.S. rod or HYSD steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete in all floors (weight of binding wires will not be considered for payment and payment will be made on weight of M.S. rod or HYSD steel only.
Fly Ash brick masonry in cement mortar (1:6) in Superstructure using fly ash bricks of 23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work complete in all respect.
6mm (¼”) thick cement plaster (1:4) finished smooth to ceiling after chipping and chiseling including watering and curing with cost, conveyance, royalties, and taxes of all materials with all labour and T&P required for the work complete in all respect.
16mm (½”) thick cement plaster (1:6) finished smooth to ceiling after chipping and chiseling including watering and curing with cost, conveyance, royalties, and taxes of all materials with all labour and T&P required for the work complete in all respect in all floors
12mm (½”) thick cement plaster (1:6) finished smooth to ceiling after chipping and chiseling including watering and curing with cost, conveyance, royalties, and taxes of all materials with all labour and T&P required for the work complete in all respect in all floors
Supplying, fitting and fixing vitrified tiles in floors of size 600mm x 600mm of approved make confirming to IS:13755 laid on 20mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cment of approved quality including cost of all materials, labour, T&P etc required for the work all complete as per direction of Engineer-in-charge.
Fixing vitrified tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete including cost of precast tiles.
Finishing wall surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffodling staging charges with cost of all materials, taxes, labour, T&P etc. complete.
2.5cm (1”) av. thick grading concrete (1:2:2) using 6mm size black hard crusher broken granite chips over roof slab after chipping and chiseling the same and cleaning the surface by brushing laid to proper slope finished smooth to receive tarfelt treatment watering and curing including cost, conveyance, royalties of all materials with all labour and T&P etc. required for the work complete in all respect in all floors.
Supplying, fitting & fixing welded mesh jally of approved make & size 25mmx25mmx11 gauge including cost of all charges e.t.c. all complete.
Supplying, fitting, fixing in all floor W.I. grills, grill gate s, Ms gates with top and bottom rails, , steel window, crital frames for windows staircase and parapet railling as per approved drawing and design including making holes in walll sand RCC structure , wood wokrs etc. and making good the damages to walls with (1:2:4) with black hard crusher granite chips of dierction of Engineer-In-Charge.
Supplying fitting and fixing angle iron truss / rafter / purlin made out of M.S. angle iron of approved section in roof frame including drilling holes and supplying nuts and bolts with cement concrete (1:2:4) on walls using 12mm to 20mm size black hard crusher broken granite chips (20mm size not exceeding 25%) including watering, curing, cost, conveyance royalties and taxes of all materials complete in all respect. (Payment will be made on the weight of angle iron only and the weight of nuts and bolts will not be taken into consideration).
Painting two coats with any approved synthetic enamel paint of approved quality shade and make over a coat of priming to new wood work / iron work including cost of the primer and paint, sand papering polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect.
Painting two coats with any approved weather seal coat (I.S.I.) paint of approved quality shade and make over a coat of priming with water bound wall cement primer (I.S.I.) to wall surface including acrylic putty with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect.
Wall painting 2 coats with plastic emulsion paint of approved shade over a coat of wall primer on new work to give an even shade including cost of paint.
Supplying, fitting & fixing of openable UPVC Doors with Door frame of approved make with 6mm thick glass of approved quality complete with frame . Shutters and all fittings and fixtures complete.
Supplying, fitting & fixing of two track UPVC sliding - type window of approved make with 6mm thick glass of approved quality complete with frame . Shutters and all fittings and fixtures complete.
Supply and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) FENESTA / NCL or equivalent Ventilator/Top hung -60 series duly manufactured using UPVC reinforced profiles of 60mm x 50mm x 2.5mm for outer frames, 75mm x 60mm x 2.25mm for casement window sash profile capable of mounting single slazing system , structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window sash shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN or reputed make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 no., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site with 10 years manufactures warranty for discoloration, wraping, mechanical failures, shrinkages, rotting, corrosion etc. with a quality certificate from relevant department of Govt. of India, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work (structural requirements profiles are to be got approved by the Engineer-in-Charge of the work before fabrication of the shutter) as per specification and direction of the Engineer-in-Charge.
Providing and fixing on wall face unplasticised-PVC moulded fitting / accessoried for unplasticised rigid PVC 100mm Rain water pipe conforming to IS: 13592 Type A including jointing with swal ring conforming of IS: 5382 leaving 10mm gap for themal expansion.
Dismantling G.C.I. or.A.C. sheet roofing after carefully removing the bolts and nuts including stacking of the materials for reuse and removing the debris within 50 m. lead. Etc complete
Fixing roofing sheet of 0.50 mm thick puff panel top 040.0mm & bottom 0.30 mm GI Colour Coated sheet etc complete
GROUP A
GROUP B
GROUP C
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision). (Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN)/Panasonic (vision) (For equipement power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
Supplying,fixing of 3x6A+1X 16A Plug on the separate board with complete fitting by 01 no of 16A+3 nos 6A switch & socket(modular type) with suitable size modular box & metallic cover plate (both side) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider (Zencelo)/ legrand( Myrius-NEXT GEN) /Panasonic (vision) (For equipement power). (Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (MAKE- HAVELLS /HPL/ VGUARD/ FINOLEX/ ANCHOR)
2 X 1.5sq. mm + 1 X1.5sq. mm
2 X 2.5sq. mm + 1 X1.5sq. Mm
2 x 4.0 sq.mm + 1 x 1.5 sq.mm
2x6 Sq.mm.+ 1x2.5 Sq.mm.
S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make: legrand (Myrius) / Schneider (Zencelo)/ Panasonic(Vision)
Supply and fixing of 12 WAY SPN DOUBLE DOOR single pole and neutral, sheet steel, MCB distribution board consumer unit, 240 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic covr for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( But with out MCB / RCCB / Isolator)
Supply and fixing of 6 amp to 32 amp rating 240 V SP "C" series miniature circuit breaker suitable for inductive loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.
Supply and fixing of 6-32 amp rating 415 V DP "C" series miniature circuit breaker suitable for inductive loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.
Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K, THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells /Philips/ Wipro /Crompton/ Bajaj).The lumi
naire should be Replacement Warranty will be 2 years
Supply & Fixing of 15Watt LED Bulb (Make-Bajaj/ Philips /Crompton/ Havells/ Wipro/ Halonix/ Panasonic)
Supply & Fixing of 20Watt LED Tubet light (Make-Bajaj/ Philips /Crompton/ Havells/ Wipro/ Halonix/ Panasonic)
A.C Ceiling fan 48" size. (Make-Polycab -Vital / Crompton -Jura/ Havells-Velocity/ Usha-striker /Orient-new breezee/Summer Cool , Polar -Model Win-R etc).
Dismantling & Installation charges of Split AC machine
Over Halling And servicing 1.5/2 Ton Split Ac Machine Indoor and Outdoor
Gas Charging
Supply and fixing of 15Amp AC top
Supplying of one number 4core x 16 sq mm PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade Make- Finolex/Polycab/HAVELLS/RR KABLE/KEI/Gloster of following size cables as per direction of Engg.-in-Charge.
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.98 MB
Tendernotice_2.pdf
PDF • 0.08 MB
DTCN003.pdf
Tender Documents • 2.27 MB
BOQ_564384.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid