CERTAIN REPAIRS TO CHARPOY GI PIPE PLY TOP AND CERTAIN FURNITURE AT MIL STN SRI GANGANAGAR

Amount

S&F in replacement ply wood top from Charpoy GI pipe 'medium grade' 32 mm bore with new ply wood 12 mm thick 7 ply BWR Grade ISI marked fixing with nuts & bolts as per existing size and shape complete all as specified and directed by Engineer - in - Charge. DRG NO. FD-220 (Note : The size of plywood top as per existing as per drawing)

Assembling / tightening of loose socket of charpoy frames with minor repairs complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

S&F in replacement galvanized iron elbow 3 ways 'medium grade' (ISI marked) suitable for 32mm bore galvanized iron pipe of Charpoy complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

S&F in replacement galvanized iron check nut 6mm thick (ISI marked) suitable for 32mm bore galvanized iron pipe of Charpoy complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

S&F in replacement long rail made out of galvanized iron pipe 32mm bore medium grade ISI marked and fixing duly threaded / welded to galvanized iron pipe of charpoy complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

S&F in replacement short rail made out of 32mm bore galvanized iron pipe long rail obtained from long rail and fixing duly threaded/welded to Charpoy GI pipe complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

S&F in replacement leg made out of 32mm bore galvanized iron pipe long rail obtained from short rail and fixing duly threaded/welded to Charpoy GI pipe complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

M & L for welding broken / cracked joints of charpoy galvanized iron pipe 32mm bore (i.e. short rail, long rail, leg etc.) upto 32mm dia x 3mm thick by gas welding as per existing design complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

S&F in replacement 25 x 3mm flat iron clamp including washer made to shape as per existing design and welded to Charpoy GI pipe complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

S&F in replacement one piece seat & back of chairs school with hand board all as specified and shown on drawing and directed by Engineer-in-Charge. DRG NO. FD/E6/MAP/05

S&F in replacement hand board of chair school made out of 18 mm prelaminated partical board Top openable PVC edging screwed to 25 mm dia holow steel pipe inserted in 20 mmdia MS Rod welded to frame all as specified and shown on drawing and directed by Engineer-in-Charge. DRG NO. FD/E6/MAP/05

M&L for welding broken/craked joints of chair school by Gas welding as per existing design complete all as specified and directed by Engineer-in-Charge.DRG NO. FD/E6/MAP/05

S&F in replacement Top of peg table made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge.Drg : FD-236, FD-277, FD-255, FD-383, FD-384

S&F in replacement leg of peg table made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-236, FD-277, FD-255, FD-383, FD-384

S&F in replacement Long rail of peg table made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-236, FD-277, FD-255, FD-383, FD-384

S&F in replacement short rail of peg table made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-236, FD-277, FD-255, FD-383, FD-384

M & L for melamine polishing on Teak wood, one or more coats to exposed surface including preparing the surface of table peg complete all as specified and directed by Engineer - in – Charge Drg : FD – 236, FD – 277, FD – 284, FD-383 & 384

S&F in replacement Top of table bed side, made out of 18mm thick prelaminated partical beading board ISI marked alongwith 4mm Teak wood beading all around complete all as specified and directed by Engineer - in – Charge. Drg : FD-276, FD-248

S&F in replacement Side of table bed side, made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-276, FD-248

S&F in replacement shelf of table bed side, made out of 12mm thick ply wood commercial face both side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-276, FD-248

S&F in replacement back ply of table bed side made out of 6mm thick ply wood commercial face both side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-276, FD-248

M & L for melamine polishing on Teak wood, one or more coats to exposed surface including preparing the surface of table bed side complete all as specified and directed by Engineer - in – Charge Drg : FD – 276, FD-248

S&F in replacement Charpoy IP hard Top (Cover) 12 mm thick plywood BWR ISI marked, of size 1980mm x 900mm complete all as specified and directed by Engineer - in – Charge. Drg No. FD/MAP/11/01 as applicable

M&L for applying one coat of synthetic enamel paint (Olive black) with spray machine including preparation, rectification and denting etc. of steel surfaces of Charpoy IP hard Top complete all as specified and directed by Engineer-in- Charge. Drg : FD/MAP/11/01

S&F in replacement locking device of brass bright finish, six lever with keys in duplicate for each lock to drawers/lockers to table office (Officer/Clerk) complete all as specified and directed by Engineer - in – Charge. Drg No. FD-84(M)

S&F in replacement top of table office (officer) steel made from 18mm thick melamine shade pre-laminated particle board including 4mm thick teakwood beading alround complete all as specified and directed by Engineer-in-Charge. Drg : FD-84(M)

S&F in replacement top of table office (clerk) steel made from 18mm thick melamine shade pre-laminated particle board including 4mm thick teakwood beading alround complete all as specified and directed by Engineer-in-Charge. Drg : FD-84

S&F in replacement drawer of table office (officer) steel made out of 1mm thick PBI sheet duly painted with one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. Drg : FD-84(M)

S&F in replacement drawer of table office (clerk) made out of 1mm thick PBI sheet duly painted with one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. Drg No. FD-84(M)

M&L for repairing such as welding, lapping, turning, riveting bolting etc to drawers of table office steel (Officer/ clerk) to make them in serviceable condition complete all as specified and directed by Engineer-in-Charge. Drg : FD-84(M)

M&L for applying one coat of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of table office (officer) steel complete all as specified and directed by Engineer-in-Charge. Drg : FD-84

M&L for applying one coat of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of table office (Clerk) steel complete all as specified and directed by Engineer-in-Charge.Drg : FD-84

Note :(i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

Khatri Trunk Factory

vardhman traders

JAIN TRADERS