Construction of Ramnagar Nuapatna Crematorium in ward no-59.

Earth work in excavation in Ordinary soil including dressing & levelling the bed & depositing soil within initial lead & lift.

Supplying & Filling in foundatin and plinth with sand watered and rammed including cost, conveyance, royalty& labour etc.

Providing Cement Concrete (1:3:6) with 4 cm size Crusher Brocken hard granite metal including cost of all labour, materials with all taxes, lead, royalty T & P etc all complete.

Supplying all materials, labour, T&P for laying P.C.C (1:2:4) using 12mm size c.b.h.g chips including well curing cost of conveyance & royality taxes etc all complete as per specification and direction of the Engineer-In-Charge

R.C.C work in ground floor of M-20 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete .

Plinth Beam (Wash Room) Plinth Beam (Resting Shed) Plinth Beam (Cremation)

Column Super Structure (Cremation Footing

Cremention Block (Lintel)

Washroom (Roof Beam)

Cremention Block (Roof Slab)

Straightening cutting, bending bent up of M.S. rods / Tor steels, including cranking, hooking, welding or jointing the M.S. rods or tor confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C. works including cost, conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour with all T&P required for the work etc.

Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:6) in foundation and plinth

Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:6) in Super Structure

Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance and royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.)

16 mm. thick cement plaster (1 :6) over brick or stone masonry including watering curring etc.

Proving & laying of concrete paver block (60mm ) thk of different size M20 grade of concrete over 50mm thik compacted sand layer including of cost,conveyance & royality of all material.

Supplying and fixing of Pre cast kerb stone of size 600mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984.

Kerbstone 600*300*151

Collecting Supplying & Stacking Good Lawn Earth including initiallead and lift within 5km lead as per specification etc.

Filling in Foundation & Plinth with excavated materials (Ordinary Soil).

Fine dressing of the ground.

Grassing with Broad leaf grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free fromweeds and fit for mowing including cost of grass and supplying good earth, if needed (the good earth shall be paid for separately).

Cost of Shurbs A Catogory

Cost of bottle palm tree of height 3.05 mtrs

Supplying Fitting & fixing M.S. Grill,M.S door & M.S. window,Rolling Shutter with frame with MS angle frame of 35x35x6 mm and shutter section of 30x30x5mm MS angle with welding of 25x6 mm flat and welding of 16 gauge CR sheet with arrangement of clamp fitting of 3 nos of 4" hinges 1 no 2" hinges and 300mmx16 mm Aldrop with8" Tower bolt and grills and gate made out of M.S. square bar / M.S. flats / M.S. angles / M.S. sheet as per approved drawing and design, cutting to required size and welding properly, finished smooth by machine grinding and sand papering, including cost, conveyance, taxes of all materials, required screws, cost of all labour, T&P painting a coat of red lead primer etc. as required for the work complete including the cost of making holes on brick or concrete structure subsequent mending good damages complete as per direction of the Engineer-in-charge.

Providing Mural Painting a coat of primer over plastered surface including cost & conveyance of all materials etc.

Supplying, transporting and fitting & fixing of Cast Iron Frame for Cremation as per approved specification

Providing fitting & fixing of Kadapa stone in the floor including cost conveyance royalty etc complete as per the

Supplying, fitting and fixing Fixing GRANITE in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete excluding cost of marble. of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer in charge.

Supplying, fitting and fixing High Lighter Wall Tile - (Make -Johnson / Khajaria/Somali) of size 300mm x 400mm of approved make confirming to IS 13755 laid on 20 mm thick cement mortar 1:4 and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer in charge.

Supplying, fitting and fixing ANTI SKID CERAMIC in floors of size 300mm x 300mm of approved make confirming to IS 13755 laid on 20 mm thick cement mortar 1:4 and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer in charge.

Providing ,fitting & fixing aluminium door with anodized allluminium door section of 9202 as vertical member, 9201 as top member & 9200 as bottom & middle member with frame section no. 9221 and tapper clip no. 4660 and the frame to be completed by means of joining angle No. 1855 including cost of labour, T & P hire charges of drilling machine, labour charges etc. complete .

Providing & fixing of Fixed vetilators of approved make to be fabricated from roll formed sections made of pre- painted steel (base steel as per IS-513 of 0.6mm. Thick D quilty, galvanized as per IS-277 with Zinc of 120Gm/Sqm) with paint specification being with primer of 5-7 microns and finished paint with plyster paint (black /pearl white/Choclate Brown ) of 12-16 microns along with alkyd backer at the back of 5-7 micron and the size of outer frame being of 46x52mm and with all vetrical & horizontal mullions ar of 46x70mm & fixed beading are of 18x25mm.Accessories /gasket are to be used as per the manufacture's,supply and specification like handle being made of high grade aluminium power coated with nylon reciver & gasket will be made of EPDM. All corner brackets are to made of CRCA with zinc phospeting. the mullian caps & louvered-clips should be of glass filled nylon. the section are to be cut to length,mitre jointed with corne bracket & frames are fixed to the concret/ masonary work by means of self excapading screws & glas to be used of 5mm refelective with all taxes .

Providing weather coat two coat over a coat of primer over plastered surface including cost & conveyance of all materials etc.

Providing and fixing in position 3 seaters ms designer Bench of approved design all complete.

Providing and fixing in position self standing FRP Frog/ Animal shape dust Bin of approved design and make of minimum height of 0.85 meter dia 0.60 meter (capacity min 80 ltrs) designed for accommodating dry as well as wet kind of trash in the garden made out of in pure polyester Fiberglass Reinforced Plastic (UV resistant finishing) of

Providing and fixing in position Galvanized Mild Steel Prefabricated Roofing Structure over resting shed 5m x 4m x 1m (as per drawing)

Providing and fixing in position roofing tile like onduline company or same make Length 1070 mm Width 400 mm Thickness 3 mm Wave Height 38 mm Weight 3.1 kg/m² Corrugations + Flats 6 + 5 Gross Surface

Cutting Hole in 250mm to 375mm thick Brick Wall for taking 110mm/160mm PVC pipe and mendig good to damages after completion of Work etc. Complete.

Supplying all materials, labour and T&P for Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as ner specification

Cutting Groove on Brick Wall for taking Water Supply Pipe line and mendig good to damages after completion of Work etc.

Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556: Part 3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification

Supplying all materials, labour and T&P and fixing to walls.ceiling and floor unplasticized PVC pipes conforming to 15.4985 of Sch-80 the following nominal diameter with finings and clamps including testing as per specification all complete. A) 25mm dia PVC Pipe-

20mm dia PVC Pipe

15mm dia PVC Pipe

Supplying all materials, labour and T&P for fitting fixing of following types of P.H. Fittings etc. all complete. 15mm CP long body Bib-Cock

15mm CP Short body Bib-Cock

125mm dia C.P Grattings

25man dia pve ball cock with rod

15man dia c.p. swan neck Pillar cock with spout

15mm dia CP conceal stop cock

Supplying of all materials, labour, T&P for fixing wash hand basin with hole for pillar cock with cast iron/M.S. brackets painted white including cutting holes in walls and making good to the damages etc all complete as per specification and direction of Engineer-in charge.

Basin Bracket in pair

Provision and fitting fixing of C.P.soap holder/disc.

Supplying all materiais, labour, T&P for fitting & fixing U PVC S.W.R pipes(4kg/cm2) and fittings of the following outside diameter including jointing with approved solvent cement by non-heat application method testing as per specification with lead of all materials to site. 110 mm OD P.V.C. SWR D/S Pipe (ISI type-B)

110 x 110 x 110mm dis PVC SWR Tee

110mm dia U. P.V.C door bend

110man dia P.V.C offset

110mm dia PVC clamp

110mm dia P.V.C.cowl

110mm dia P.V.C socket

110mm dia P.V.C. SWR P Trap

Supplying all materials labour T&P for Fixing Rotational moulded polyethylene cylindrical vertical Double layer water storage tanks conforming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and dicection of the Engineer in charge.

Supplying all materials, labour and T&P for construction of 1.20mtr.dia.x1.50mtr. Deep soak-way pit with dry brick walling up to 1.10mtr. height and brick work with cement mortar (1:6) for 0.45mar. height of wall at top.cement plaster (1:3) inside and outside, inside filled with dry brick khoa of 50mm.to 100mmsize to a height of 2.00mtr.from bottom, covered by means of 40mm thick R.C.C. perforated slab, 50mm thick R.C.C.well cover in pieces fitted with iron rings including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved

Provision and fitting fixing of CP WASTE (32mm-5" lone

Provision and fitting fixing of CP FLANGE

Provision and fitting fixing of 15mmx450mm PVC connection pipe

Provision and fitting fixing of 40mmx1150mm long PVC corrugated waste pipe

Supplying all materials, labour and T&P for construction of inspection chamber as per P.H. specification and design all complete

Supplying all materials, labour T&P and setting of boring equipments including Errection of suitable staging for Installation of required size of required T/W, dismentalling and removing the same after completion of the said work including transportaion of the boring equipments cleaning and levelling the site properly as per requirement excavation of the mud pit, channel etc. in all respect as per the direction of the Engineering in-Charge

Supplying all labour and T&P for transporting the Mud Pamp Generator, boring pipes PVC Pipe, Top Casing & Grouting Pipes and necessary fittings, Well Screen, Cement Cow dung, Bentonitz Powder and gravel etc. from departmental Store to work site including loading and unloading the same within 5km away froen store as per direction of Engineer in Charge.

Supplying all labour and T&P for Drilling the Pilot bore nor less than 102mm dia without casing pipe in all kinds of soil and rocks for the following depth including the supplying of necessary boring pipe and cutting equipments extra sockets (whenever required) etc and withdrwing the boring pipes washing and keeping the the hore clear and logging if required complete in all respect as per direction of the Engineering in-Charge a) Drilling 100mm dia Bore (o mtr to 60 mtr & beyond 60 mtr)

Supplying all labour and T&P for Lowering the 300mm dia Casing pipe fitting and fixing in possition and removing the same after completion of work etc. Complete in all respect as per direction of the Engineering in Chara (29395)

Supplying all labour and T&P for reaming the Pilot bore to the following sizes and depths without casing pipes including with drawing the boring pipes, washing the bore by means to pipe cylinder etc. Complete in all respect as Per direction of the Engineering in. Charge.

Reaming 150mm dia to 200mm dia (from 0.00mir to 360.00mtrs depth)

Reaming 200mm dia to 250mm dia (from 0.00mer to 360.00mtrs depth) (29383)

Reaming 250mm din to 300mm dia (from 0.00mtr to 360.00mtrs depth)

Supplying all labour, T&P and jointing materials and lowering the PVC Casing Pipe, well screens, Cutter plug fitted and fixed in proper possition and washing and cleaning the bore as per P.H. specification and direction of Engineer in-Charge (a) Lowering 150mm dia PVC Casing Pipe (Casing Pipe Supplied by Department from CMC Store.

Supplying all labour, tools and plant and materials for cleaning and developing the tubewell with compressor continuously washed till clean and adequate discharge is obtained from the tube well including supply and use of necessary equipments and labour complete in all respect as per the direction of the Engineer-in-Charge. (29447)

Collecting supplying and stacking Washed Gravel or River required singles measuring 1.50mx1.50mx0.50m) as one cum including all site cost of convevance.mmality taxes etc. Complete

Supplying all labour and T&P for packing the bore with Washed Gravel or River singles of required sizes around well screen and pipes as per specification and direction of Enviocer in-Charee (29434)

Cost of Materials 150mm dia ASTM PVC Pipe(Sch-80)

150 mm Conical Plug

150x300 mm PVC Short Piece

VBentonite Power(Material-233)

150mm MS Top Cover

Supplying and fixing of 40mm S.D PVC Pipe etc. complete with transportation T&P and labour charges et complete as per direction of the Engineering in-Charge.

Supplying all materials labour and T&P for fitting and fixing of the following acessories as per specification and direction of the Engineer in charge. (i) Water proof GI Tochain rope-

Tochain Clip

Steel Nipple

Steel Nut & Bolt

32mm/40mm M.S Clamp

Supplying all materials labour T&P and for slot cutting making strainer including testing as per specification complete (150mm PVC Pipe Supplied by CMC Denartmental Store)

Supplying installation and commissioning of 2.00/2.50 HP Single phase 230 Volt 50 Hz Submersible Pump Set (Max) Head-65mir, Min Head -39mirs) Make-Texmo suitable for 40mm/50mm dia out let etc complete with transportation T&P and labour charges as per direction of the Engineering in Charge.

Supplying all materials, labour and fabrication of MS Box for accompaning Starter main switch etc required for funning the pump all complete as per direction of the Engineer in charge.

Supplying and laying of 2.5s Sqmm PVC insulated,PVC sheathed twin core Multistrand water proof copper flat cable (Black) etc complete with all cost transportation T&P charges etc as per direction of the Engineering in-Charge