REPAIR /MAINT OF SHORT RANGE, SINGHPUR RANGE, BRAVO FLT, FENCING AND MISC B/R AND E/M WORKS AT TECH AREA AF STN GWALIOR

Cutting of all bushes ,grass and sarcandas, shrubs, vegetation etc including trees n.exc 30 cm girth and removing the material exc 500m and n. exc 1 KM complete all as specified and directed.

M&L for Supply of Saw dust and mixing with sand in particular ratio as per user requirement for spreading on Fd Target target area complete all as specified and directed. (Note: Supply of Sand and Filling of Mixture on Fd Target Area shall be measured and Paid Searately.

Supply only Sand (passing through 4.75 mm IS sieve) for Fd Target area/ Firing Butt all as specified and directed by EIC.

Forming earthen band above ground level including raising of sand and saw dust mixture, ramming and finishing of top surface up to a height ot 6 mtr manually or machenically in required slope at target area as per user requirment complete all as specified and directed by Engr-in-charge . Note : Before laying of sand and saw dust mixture the existing ground should be loosened and sieving through 4.75mm sieve for extraction of fired bullets remnants.

M&L for PP (poly propylene) woven bag of bright white colour 30 Kg capacity (Approx) by filling with sand/soil and laying at site as per user requirement complete including removing old deteriorated bags from site out of defence land all as specified and directed by Engineer-in-Charge. Note :- Sand / Soil for filling is available at site.

Demollition of cement concrete (unreinforced) including floor tiles, ground floors and pavings n. exc 15 cm thick below or above G.L complete all as specified and directed .

M&L for Cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in plinths, kerbs, haunching, rounded or chamfered on edges, coping , floor finishes etc incl necessary form work.

M&L for 25 mm thick PCC (1:2:4) type B0 (using 12.5 mm graded stone agg) as in sub base of flooring for levelling course complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( backing, screed/plaster) any number of layers), rubbish off the premises.

M&L for non skid coloured ceramic tiles 7-8mm thick area of each tiles exc 0.06 Sqm but not exc 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.