Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.2 LAccepted-AOC | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹5.0 L+₹78,180 (18.7%)Rejected-Finance ABANI APARTMENT 1ST FLOOR 6 2 TALBAGAN ROAD WEST PO NONACHANDANPUKUR BARRACKPORE KOLKATA 700 122 | KOLKATA | 24 PARAGANAS NORTH | WEST BENGAL | 700122 | L2 | Rejected-Finance OTHER THAN L1 BIDDER |
Tender Value
₹4.3 L
EMD Value
₹8,600
Closing Date
24 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) (CGN) KOLKATA
DAMODAR COMPLEX GARDEN REACH ROAD KOLKATA 23
PROVN OF STANDBY SEWAGE DISPOSAL PUMP AND ALLIED WORK AT TRAINGULAR PARK UNDER GE (I) (CGN) KOLKATA
2022_MES_558433_1
8072/B/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE (I) (CGN) KOLKATA
AS PER TENDER DOCUMENT
10 documents required · 10 mandatory
₹500
GE (I) (CGN) KOLKATA
₹8,600
Yes
29 Dec 2022
18 Oct 2022
25 Nov 2022
18 Oct 2022
24 Nov 2022
10 Nov 2022
Amount
Supply, installation , testing and commissioning of surafce mounted end suction and top delivery non-clogging sewage disposal pump of cast iron body and bronze impeller with stainless steel shaft suitable to allow disposal of maximum 50 mm solid particle size, with a discharge capacity of 72 Cubic meter per hour and 15 mtr head coupled with suiable capacity of energy saving TEFC motor suitable for operation on 415 Volts, 3 phase, 50 Hz AC including base frame fabricated out of MS Channel suitable size, coupling, coupling guard, foundation nut & bolts, pressure gauge and all other necessary fittings complete all as specified and as directed. Note: Suitable cement concrete foundation (minimum 6" above from ground floor) duly plastered, with anti vibration pads etc. complete as per manufacturer's design & standards and as per detailed specifications, rate deemed to be inclusive of the rate. Make: Kirloskar/KSB/Grundfuss
Supply, installation, testing and commissioning floor/wall mounted outdoor panel of suitable size. The Panel made out of 3.15 mm thick MS CRCA sheet dust and vermin proof and angle iron structure 50x50x6 mm ,CPRI approved compartmental type of size as required including locking arrangement and 2 coat of powder coated paint over a coat of red oxide metal primer, fixed in floor with MS angle iron 50x50x6mm frame structure and grouted with PCC M-15 (Nominal mix) using 20mm graded stone aggregate with and including Separate copper bus equal size (1.5 times capcity of incomer) for phase and neutral with porcelline insulator complete all fittings and fixing arrangement with suitable size FRLS copper wired connection, cable glands for cable entry etc complete all as specified and as directed having following specifications :- INCOMER (i) 4 Pole MCCB 63 Amps, 16 KA Breaking Capacity with thermal magnetic release-01 No OUTGOING (i) 4 Pole MCCB 40 Amps, 16 KA Breaking Capacity with thermal magnetic release- 03 Nos (ii) MCB SPN 20 Amp- 02 No (iii) Fully automatic star delta starter, 15 HP-01 No. Make- L&T, Cat No SS96259 or equivalent. (iv) Direct on-line starter, 10 HP-01 No. Make- L&T, Cat No SS95647 or equivalent. (v) Motor protection relay-02 Nos. Make- L&T, Cat NoMM10240E005 or equivalent. (vi) Digital Ammeter - 01 No with CTs (vii) Digital Voltmeter 0-500 V - 01 No (viii) LED indicator Light - 01 set (3 Nos) Note: Cost of PCC foundation and earth work if any deemed inclusive of quoted rate.
M & L Earthing complete with Galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of plate not less than 1.50 m below normal ground level connected to 32 X 6mm GI Strip [Earth Lead] and GI pipe 50 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per Electrical plate No. 3 of SSR Part – I, connected to panel including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified and directed.
M & L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32x6 galvanised iron strip. Complete all as specified and directed.
Supply and lay pipe MS ERW as per IS3589 (1981) thickness 5.4 mm including fittings, 100 mm (4”) dia including two coats painting over a coat of red oxide base primer complete all as specified and as directed. Make: Jindal/TATA
Supply and lay pipe MS ERW as per IS3589 (1981) thickness 5.4 mm including fittings, 80 mm (3”) dia including two coats painting over a coat of red oxide base primer complete all as specified and as directed. Make: Jindal/TATA
M&L for Cutting existing MS/GI/DI/CI pipe upto 200 mm dia bore in position for insertions of new pipe/fittings such as Tee, bend collar etc as required including fabrication, making hole in wall/sump and making good the disturbed surface complete all as specified and as directed by Engr-in-charge.
Supply and fix for 80 mm dia D.I. resilient (soft) seated gate valve with pocket less body, ss stem (AISI 410), epdm coated di wedge 100% vaccum tight design with toroidal sealing rings & over 250 micron epoxy coating in PN16 designed to BS:5163/IS:14846 non-rising stem type with hand wheel operation complete all as specified and as directed. Make: Kartar/Kirloskar/VAG
S&F in repairs 3 layer rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) hoisted and fixed in position of 500 Ltr capacity along with 20 mm size float valve and other necessary accesories all as specified in SSR and as directed.
M&L for Cutting CI /DI/GI water mains in position for insertions of new fittings such as Tee, bend collar etc as required including wellding ,hole and ferul system upto 150 mm dia bore complete all as specified and as directedby Engr-in-charge.
S&F 20 mm dia gun metal globe/gate valve with iron wheel head screwed both ends for iron pipes and fixed in existing position including taking down unserviceable one complete all as specified and as directed.
Supply and laying 20 mm dia steel water tube medium grade galvanised with all fittings laid in trenches complete all as specified and as directed.
Supply and fix 80 mm dia DI non-return valve, flanged end in swing type design with EPDM door and with over 250 micron epoxy coating including all necessary items complete all as specified and as directed. Make: Kartar/Kirloskar/VAG
Globe Electricals
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .