8715/BOR/E8 Repair/maintenance of street/ security/ perimeter lights and replacement of unserviceable conventional fittings/fixture with LED fittings/fixture incl MCB DB at Technical and Domestic area of 19 wing under GE (AF) Borjhar

Amount

STREET/ SECURITY/ PERIMETER LIGHTS AND ALLIED WORKS

Taking down high pressure SV/ MV /MH /FTL/ LED street light fittings and flood light fittings of any wattage/ any height of pole/ walls/ any location for repairs or replacement of burnt out accessories and rectifying the fault complete all as specified and as directed by Engineer-in -charge. Note :- LED drivers, surge protection and cable shall be measured and paid seperately under respective item of schedule.

Fixing only street light fittings/ flood lights after repairs of any wattage on poles/walls. any height comprising of LED drivers, surge protection with cables suitable for mounting on 40/25mm GI pipe or bracket arms with pole fixing arrangement and other connected accessories duly prewired complete with copper conductor for electrical connections and testing complete all as specified and as directed by Engineer-in -charge.

S & F LED Street light fitting of 20 watt, energy saving & invironmental friendly long life, single piece deep drawn Pressure die-cast powder coated aluminium housing with prismatic polycarbonate cover with individual LED Lense (IP-65/66) complete with all accessories internally pre- wired and including connecting up with three core twisted flexible copper conductor cable size 2.5Sqmm, 2Core fixed to wall /pole Complete all as specified and as directed by Engineer-in-Charge. Make :- Crompton Cat No.LST-20-CDL or SURYA Cat No. SLE UL 20W IP66 LXN / Bajaj Cat No BCLST 20W LED IV2 or Equivalent of Wipro /Philips/Havells/Jaguar/Simoco

S & F LED Street light fitting of 30 watt, energy saving & invironmental friendly long life, single piece deep drawn Pressure die-cast powder coated aluminium housing with prismatic polycarbonate cover with individual LED Lense (IP-65/66) complete with all accessories internally pre- wired and including connecting up with three core twisted flexible copper conductor cable size 2.5Sqmm, 2Core fixed to wall /pole Complete all as specified and as directed by Engineer-in-Charge. Make :- Crompton Cat No.LSTS-30-CDL or SURYA Cat No. SLE UL 30W IP66 LXN/ Jaguar Cat No LSRT01S030XC / Simoco Cat No. SLSL30CL or Equivalent from Wipro /Philips/Havells

S & F LED Street light fitting of 45 watt, energy saving & invironmental friendly long life, single piece deep drawn Pressure die-cast powder coated aluminium housing with prismatic polycarbonate cover with individual LED Lense (IP-65/66) complete with all accessories internally pre- wired and including connecting up with three core twisted flexible copper conductor cable size 2.5Sqmm, 2Core fixed to wall /pole Complete all as specified and as directed by Engineer-in-Charge. Make :- Crompton Cat No.LSTS-45-CDL or SURYA Cat No. SLE UL 45W IP66 LXN/ Jaguar Cat No.LSRT01S045XC / Simoco Cat No. SLSL45CL or Equivalent from Wipro /Philips /Havells

S & F LED Street light fitting of 90 watt, energy saving & invironmental friendly long life, single piece deep drawn Pressure die-cast powder coated aluminium housing with prismatic polycarbonate cover with individual LED Lense (IP-65/66) complete with all accessories internally pre- wired and including connecting up with three core twisted flexible copper conductor cable size 2.5Sqmm, 2Core fixed to wall /pole Complete all as specified and as directed by Engineer-in-Charge. Make :- Crompton Cat No.LSTP-90-CDL or SURYA Cat No. SLE UL 90W IP66 LXN/ Jaguar Cat No.LSRT01S090XC / Simoco Cat No. SLSL90CL or Equivalent from Wipro /Philips /Havells

S & F Street light fitting of 72 watt LED new generation energy saving & invironmental friendly long life, single piece deep drawn Pressure die-cast powder coated aluminium housing with prismatic polycarbonate cover with individual LED Lense (IP-65/66 protection) complete with all accessories internally pre- wired and including connecting up with three core twisted flexible copper conductor cable size 2.5Sqmm, 2Core fixed to wall /pole Complete all as specified and as directed by Engineer-in-Charge. Make :- SURYA Cat No. SLE UL 72W IP66 LXN / Bajaj Cat No BRTFG 72W LED I / Crompton Cat No.LSTP-72-CDL/ Jaguar Cat No.LSRT01S072XC / Simoco Cat No. SLSL72CL or Equivalent from Wipro /Philips /Havells

S&F 'LED' Flood light with unique design and thermal management, ideal for stadium lighting and high mast applications complete of 200 W capacity complete all as specified and directed. Make:- Crompton Cat No. LFLPI-200-CDL/60 / Simoco Cat No. SLFL200CL or Surya/ Jaguar Wipro /Philips /Havells

S&F 'Circular LED' Flood light with innovative finless design and excellent management and light distribution along with IP66 protection complete of 35 W capacity complete all as specified and directed. Make:- Crompton Cat No. LFLN11-35-CDL/60 or Surya/ Jaguar Wipro /Philips /Havells

Supply and fixing 5KV surge for LED street light, 230 volts, 50Hz compatible for industrial and outdoor LED fixtures rated power of exc. 75w but n.exc 150w for fixing in repairs complete all as specified and directed. Make:- Crompton /surya/ Wipro /Philips /Havells/Bajaj

Supply and fixing 5KV surge for LED street light, 230 volts, 50Hz compatible for industrial and outdoor LED fixtures rated power of upto 75w for fixing in repairs complete all as specified and directed. Make:- Crompton /surya/ Wipro /Philips /Havells/Bajaj

Supply and fixing drivers for LED street lights 25/30w, 230 volts, 50Hz complete all as specified and directed. Make:- Crompton /surya/ Wipro /Philips /Havells/Bajaj

Supply and fixing drivers for LED street lights 45/60w, 230 volts, 50Hz complete all as specified and directed. Make:- Crompton /surya/ Wipro /Philips /Havells/Bajaj

Supply and fixing drivers for LED street lights 100/120w, 230 volts, 50Hz complete all as specified and directed. Make:- Crompton /surya/ Wipro /Philips /Havells/Bajaj

M & L for Flexible PVC insulated, heavy duty, round sheathed, multistranded three core bright annealed bare copper conductor cable 2.5 sqmm, 1100 volts for connection to street lights fittings as in repair complete all as specified and as directed by Engineer-in-Charge.

Taking down only old XLPE LT under ground cable complete all as specified and directed by Engineer-in-Charge. Note: Earth work will be measured and paid seperately under respective items

Supply, laying, jointing and testing XLPE insulated, PVC bedded, Galvanized steel strip or wire armoured underground heavy duty electric power cable with stranded aluminum conductor 1100 volts grade, laid in trenches / duct with shaddling / on pole including all necessary fixing arrangement such as lugs, glands end termination etc of cross sectional area 6 Sqmm 2 core complete all as specified and as directed.

All as per item No 1.17 above but sizes of cables is 10 sqmm 4 core complete all as specified.

All as per item No 1.17 above but sizes of cables is 16 sqmm 4 core complete all as specified.

All as per item No 1.17 above but sizes of cables is 25 sqmm 3.5 core complete all as specified.

All as per item No 1.17 above but sizes of cables is 35 sqmm 3.5 core complete all as specified.

All as per item No 1.17 above but sizes of cables is 50 sqmm 3.5 core complete all as specified.

All as per item No 1.17 above but sizes of cables is 70 sqmm 3.5 core complete all as specified.

M & L for painting to steel tubular LT pole of any length (above from coping) including cross arms, clamps and M.S brackets surface of any description including removal of old paint with chemical or burning with glow lamp & cleaning to steel surface with sand paper or with scraper any number of existing coats & preparation of steel surface & applying two (2) coats of aluminium paint on pole accessaries like as cross arms, clamp, & bracket etc over a coat of red oxide primer including marking of pole No and lower portion of pole painted with 2-coat of synthetic enamel paint in different color ( black & yellow) strips of 30cm width upto 1.50 mtr height from coping complete all as specified and as directed by Engineer-in-Charge.

M & L for painting to steel tubular HT pole of any length (above from coping) including cross arms, clamps and M.S brackets surface of any description including removal of old paint with chemical or burning with glow lamp & cleaning to steel surface with sand paper or with scraper any number of existing coats & preparation of steel surface & applying two (2) coats of aluminium paint on pole accessaries like as cross arms, clamp, & bracket etc over a coat of red oxide primer including marking of pole No and lower portion of pole painted with 2-coat of synthetic enamel paint in different color ( black & yellow) strips of 30cm width upto 1.50 mtr height from coping complete all as specified and as directed by Engineer-in-Charge.

S & F in repair M.S bracket made out of 40mm bore GI Pipe medium grade, bend at 120 degree angle, 1.50 mtr long including clamp of flate iron 50mm x 6mm thick, nut, bolt & washers for fixing street light fittings to pole / wall and painted with two coats of aluminum paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-charge.

Relaying, jointing and testing old XLPE insulated, PVC bedded, Galvanized steel strip or wire armoured underground heavy duty electric power cable with stranded aluminum conductor 1100 volts grade, laid in trenches / duct / on pole including all necessary fizing arrangement such as lugs, glands end termination etc of cross sectional area 10 Sqmm 4 core to 16 Sqmm 4 core complete all as specified and as directed. Note:- Serviceable cable retrieved from Srl item No.1.16 above shall be used for relaying.

All as per item No 1.27 above but sizes of cables is 25 sqmm 3.5 core to 35 sqmm 3.5 core complete all as specified.

All as per item No 1.27 above but sizes of cables is 50 sqmm 3.5 core to 70 sqmm 3.5 core complete all as specified.

Supply and fixing new termination with necessary lugs and glands for LT UG cable 3.5/4 core 16/25 Sqmm including taking down of old burnt lugs and gland and duly preparing ends lugs crimping complete all as directed.

All as per item No 1.30 above but 35/50 Sqmm complete all as specified.

All as per item No 1.30 above but 70/95 Sqmm complete all as specified.

All as per item No 1.30 above but 120/150 Sqmm complete all as specified.

M & L for timelite distribution board, 32A, 3 pole, 230volts digital time switch complete all as specified and as directed by Engineer-in-Charge. Make : Indoasian Cat No.TL032DBO or equivalent of L&T/Siemens/ABB/Havells.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated Stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1metre apart including 4mm suspension wire, one twin core cable flat or circular of 10 Sqmm, complete all as directed by Engineer in charge.

All as per item No 1.35 above but 6 Sqmm cable complete all as specified.

All as per item No 1.35 above but 4 Sqmm cable complete all as specified.

Excavation in trenches in soft/loose soil etc n. exc 1.5 m wide and n.exc 1.5m in depth for foundation etc or for shafts, manholes, pier holes, laying of pipe, cable etc n.exc 10 Sqmr on plan and n.exc 1.5 mtr in depth and getting out complete all as specified and directed by Engineer-in-charge.

Excavation in trenches in soft/loose soil etc exc 1.5 m wide and exc 1.5m in depth/width for laying of under ground cable etc and getting out complete all as specified and directed by Engineer-in-charge.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm all as specified and directed.

Removing of surplus excavating material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed.

M&L for sand cushioning with coarse sand in trenches for protection of underground electric cable, spread to uniform 23cm thickness and punned down gently to 18cm after laying cable in trenches complete all as specified and as directed. (Note:- Only punned thickness of 18cm shall be measured and paid)

Material and labour for sub class 'B' bricks well burnt old size 230x115x75mm laid dry flat for protection of cable complete all as specified and as directed by Engr-in-charge.

Laying only old serviceable bricks of size 230x115x75mm laid dry flat for protection of cable complete all as specified and as directed by Engr-in-charge. (Note:- Serviceable bricks obtained from excavation shall be reused)

M&L for 50 mm bore mild steel galvanised medium grade pipe laid in trenches or fixed to wall/along the pole or road cross for protection of cable and sealing both ends of pipe with sealing compound as in repair complete all as specified and as directed by Engineer-in -charge.

M&L for 40 mm bore mild steel galvanised medium grade pipe laid in trenches or fixed to wall/along the pole or road cross for protection of cable and sealing both ends of pipe with sealing compound as in repair complete all as specified and as directed by Engineer-in -charge.

M&L for 25 mm bore mild steel galvanised medium grade pipe laid in trenches or fixed to wall/along the pole or road cross for protection of cable and sealing both ends of pipe with sealing compound as in repair complete all as specified and as directed by Engineer-in -charge.

S & F Integrated solar smart street light LED 20W, 50Wp Mono PV module (Monocrystalline panel with Li Fe PO4 battery and sensor including GI pole 6 mtr three step designed hot dip galvanised corrossion resistance complete testing and commissioning including civil work complete all as specified and as directed by Engineer-in-Charge. Make :- Crompton /SURYA / Bajaj/ Wipro /Philips/Havells/Jaguar/Simoco/Grid Technergy & Infra

S & F pin type porcelain, vitreous, white, brown or green insulators including galvanized mild steel spindle, two galvanised iron washers and one galvanized iron nuts, 100 mm height 65mm dia for 1100 volts grade including connected to conductor as in repairs complete all as specified and as directed by Engineer-in -charge.

S & F shackle type vitreous white, brown or green insulators for working pressure 1100 volt of 90 mm dia and 75 mm height including galvanized mild steel straps of 31x3 mm size 12 mm dia insulator bolts, nuts & washers including connected to conductor as in repairs complete all as specified and as directed by Engineer-in -charge.

Labour only Restringing for ACSR conductor form pin, disc, shackle insulators with suitable binding wire to insulators and connecting in 4 conductor system position complete all as specified and as directed by Engineer-in-Charge. Make- (i) 4 run of ACSR conductor will be measured as one length. (ii) Rope, restringing machine and other necessary tools & equipment required at site for restringing shall be arranged by the contractor without any extra cost. Contractor's quoted rate shall be deemed to be included cost of all required T&P & equipment required at site.

S & F Hot moulded (FRP) junction box for street light pole with locking arrangement with IP-65 protection of size 200x200mm with 32 Amp 4way, heavy duty terminal block with 10Amps MCB SP and two steel bracket to fix with pole as in repair complete all as specified and as directed by Engineer-in-Charge.

Supply & erecting in truelly vertical position of mild steel tubular swaged poles of 9 meter long, type 410-SP-31, complete with cast iron base plate, goose neck bracket, finial taper plug, bolt, nuts & screws and internal surface painted with black bituminous paint & external surface painted with two coat of aluminium paint over one coat of red oxide primer from top of pole to 1.5 mtr above from top of PCC coping & from top of PCC coping to 1.5 mtr height portion of pole painted with black & white colour paint as in alternate strips with and PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation and PCC (1:2:4) type B-2 using 20mm grade stone aggregate as in coping for poles complete all as specified and as directed .by Engineer –in-charge. Note :- (i) Neccesary PCC and earth work will be measured and paid seperately under the relevent items of work. (ii) Size of any colour strips shall be decided by Engineer-in-Charge as per Electricity code of practice.

M&L for PCC (1:3:6) type C-2, using 40 mm graded stone aggregate as in foundation complete all as specified and as directed by Engineer-in-charge

M&L for PCC (1:2:4) type B-2, using 20 mm graded stone aggregate as in coping/collar for poles complete all as specified and as directed by Engineer-in-charge

M & L for jumpering of two sides of ACSR conductor on over head with same conductor of length 1 mtr and with two nos clamp of suitable size including taking down old unserviceable cross jumper complete all as specified and as directed by Engineer-in -charge.

Dismantling and taking down cross arms of MS channel or angle sections, clamps, nut and bolt, washers, back plate of any size/shape complete and removal from site.

M&L for cross arms, bracing, support, clamps and back plates fabricated from structural steel section including nuts, bolts, washer, welding bending cold or hot drilling holes for bolts in any shape or size as indicated or directed including GI clamp and including of one primer coat, one under coat and one finishing coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Fixing only old serviceable cross arms with providing new bolts, nuts and washers as required including painting with one coat of aluminium paint after preparation of old surface complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Intrigral LED aviation obstruction light fittings die-cast aluminum alloy housing red coloured poly carbonate enclousere complete all as specified and as directed by Engineer-in-Charge. Make : Bajaj Cat No. BGAV 302 LED or equivalent make of Philips/ Crompton Greaves

M & L for Trimming of tree branches (touching on HT/LT OH lines) upto 10 Cms girth at any height, carefully by taking proper shut down, including suitable disposal of cut tree branches as in repair complete all as specified and as directed by Engineer-in- charge. Note :-- Tool & plants including safety measure equipments like as belt, ladder & rops etc shall be arranged by the contractors at own cost .

S&F 10Watt IP 65 rated inverted pyramid tripod LED Bollard with soft deg light distribution garden light including taking down old unserviceable light fitting complete all as specified and as directed by Engineer-in-Charge. Make : Crompton Cat No.LBLSN-10-CDL or equivalent make of Philips/ Crompton Greaves/Bajaj

S & F 4 watt LED post top light fitting LED lamp, made in die-cast aluminium housing with decorative clear opal acrylic diffuser and IP65 protection with all accessories with and including LED bulb as in repair complete all as specified and as directed by Engineer-in-Charge. Make : Bajaj Cat No.BGCTW4LED WWor Equivalent model of Crompton/Havells/Surya/Jaguar

S & F 40 watt LED post top light fitting LED lamp, made in die-cast aluminium housing with decorative opal polycarbonate diffuser and IP65 protection with all accessories with and including LED bulb as in repair complete all as specified and as directed by Engineer-in-Charge. Make : Bajaj Cat No.BGCI 40 LED or Equivalent model of Crompton/Havells/Surya/Jaguar

S & F 35 watt LED post top with modern look using new generation technology in LED to envilen to outer areas in perfect synchronisation with functionality and aesthetics, family of post top latern designed to complement the geometry of the area and IP 65 protection as in repair complete all as specified and as directed by Engineer-in-Charge. Make : Havells Victoria or Equivalent model of Crompton/Havells/Surya/Jaguar/Bajaj

Taking down old unsv air termination aluminiumfrom hanger/blast pen and building complete all as specified and as directed.

M & L for Single pointed air termination aluminium rod, 12mm dia,300mm long, fixed / grouted properly and to connect with GI pipe and aluminium strip by using suitable size of nut, bolt & washers etc all as required complete all as specified and as directed by Engineer-in-Charge

All as per item No 1.68 above but fixing only Note:- Serviceable air termination obtained from serial item No.67.00 above shall be used.

S&F GI steel strip of size 25mmx4mm thick for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as in repair complete all as specified and as directed by Engineer-in-charge.

S&F copper strip of size 20mmx3mm thick for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc , complete all as specified and as directed by Engineer-in-charge. Note: Copper strip shall be 99.99% copper to be provided

Taking down carefully old unserviceable solar street light panel alongwith accessories and light fittings of any wattage any make any size from pole and fixing the same in original position after carrying out the necessary repair with complete wiring of light fitting if required and testing complete all as specified and directed by Engineer-in-Charge. Note:- The new spares shall be measured and paid seperately as supply only under relevent items.

Supply only sealed maintenance free acid cell battery 12 volt of capacity 40 AH having company warrenty for two years with authentic papers warrenty complete all as specified and as directed. Make: Cummins India/ Exide/Amaron.

Supply only LED lamp 6 watt 12 volt, DC complete all as specified and as directed.

Supply only Solar panel DC cell suitable for 6 watt lamp complete all as specified and as directed.

S&F solar LED 4 watt garden light suitable for high efficiency mono-crystalline solar panel 1.6 Wp high quality LED 120 Lumen/W with 100 lumen lithium battery, 'A' graded lion battery No.18650 of 100 Lumen at mode 1 and 50 Lumen at mode 2 as in repair complete all as specified and directed. Make: Bajaj/Surya/Philips /Havells/Jaguar

Surface dressing not exceeding 15 cm deep including removing the materials to a distance not-exc 60 mtr including cutting vegetation complete all as specified and directed. Note :- Item shall be executed twice in each installation and quantity is given for two operation. However unit rate to be quoted by the tendered for single operation only.

M&L for Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20x15cm size complete all as specified and as directed by Engineer-in- charge.

Material and labour for earthing with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to GI strip 25x4mm thick, by means of GI Welding made out of galvanised iron mild steel and 40 mm dia GI pipe "light grade" for protection of earth lead and connected to control board or transformer neutral earth or as directed including earthing pit of size 450x450x300mm (outer size) wall thickness 100mm made in PCC (1:3:6) type C-1 and pre-cast reinforced cover slab of size 450mm x 450mm x 80mm thick made with MS XPM Jalli, RCC (1:1.5:3), with one handle made out of 8 mm dia round bar, 20mm dia GI pipe 'light grade' for watering funnels, wire mesh and provided charcoal or coke of alternative layers of 15 cm including necessary earth work of size 300x900mm, depth 2.50mtr and testing complete all as specified and directed. NOTE : (i) The earthing pit should be provided with proper earth pit and pit cover. Pit cover should be painted with cement base paint of approved colour and pit number to be marked on a GI plate above 45 cm from GL as per colour code followed in AF Station. (ii) If the desired earth registance is not achive during testing as per IS the complete earthing shall be carried out by the contractor at his own cost and no extra claim shall be admissable. (iii) Length of earth strip/electrode, if more than 7.5mtr shall be measured and apid seperately under respective items of schedule (iv) Resistance value should be less than 5 ohm.

ELECTRICAL WIRING AND REPLACEMENT OF UNSV FITTINGS/FIXTURES

Taking down carefully aluminum/copper point wiring (light, fan socket or power) complete (fittings & fixtures such as switches, ceiling roses, pendants, regulators, sockets etc to be maesured separately) and making good disturbed surfaces of walls, floors etc complete all as required and removing materials to store for keeping in safe custody for reuse in the work as directed.

Taking down carefully by unscrewing from board/outlet boxes fittings and fixtures such as switches, sockets , ceiling roses, lamp holders, brackets, ceiling fittings, fittings, tube light fittings, ceiling light fitting and regulators etc and kept in safe custody or taking credit for re-use at site or removing from site and making good to the disturbed surfaces of walls/floors etc complete all as specified and as directed by Engineer-in -charge. Note : If it is serviceable then measured

M & L for point wiring with two single core 1.5 Sqmm FRLS PVC insulated unsheathed 1100 Volts grade multi stranded copper conductor with one single core 1.50 Sqmm FRLS PVC insulated unsheathed multi stranded copper conductor as earth continuity conductor drawn through PVC concealed conduits of required size & accessories on walls/roofs ceiling and making good the disturbed surface and connecting to common earth dolly complete with replacement of 3mm thick plastic laminated sheet top cover or PVC termination board/boxes for mounting switches for accommodating switches sockets, regulators with brass screws, washers for One light point controlled by one No. one way 5 Amp switch complete all as specified and directed. Note:- Colour of cables as Phase-Red, Neutral-Black and Earth-Green.

All as per item No 2.03 above but one ceiling/ exhaust fan point controlled by one one way switch 5Amp and regulator

All as per item No 2.03 above but one 5 Amps 3 pin switch socket outlet on independent board.

All as per item No 2.03 above but one 5 Amps 3 pin switch socket outlet on same board controlled by one piano switch.

All as per item No 2.03 above but one light point controlled by two way switch.

All as per item No 2.03 above but one call bell point controlled by one push button switch.

All as per item No 2.03 here-in-before but point wiring for one 3 pin 15 Amps socket point on independent board with 2.5 Sqmm size FRLS PVC insulated, unsheathed, multi stranded, copper conductor cables 1100 volt grade and with 2.5 Sqmm FRLS PVC insulated unsheathed, single core, multistranded copper conductor cable 1100 volt grade as earth wire complete as specified and directed.

M&L for point wiring with two single core 1.5 Sqmm FRLS PVC insulated unsheathed 1100 Volts grade confirming to IS 694 multi stranded copper conductor with one single core 1.50 Sqmm FRLS PVC insulated unsheathed multi stranded copper conductor as earth continuity conductor drawn through in and including PVC casing caping (ISI Marked) of required size but not less than 20mm width, 1.2mm thick along with all fitting/ fixtures such as Tee, Bend, Elbow socket, Saddles etc. and making good the disturbed surface and connecting to common earth dolly complete with 3mm thick plastic laminated sheet top cover or PVC termination board/boxes for mounting switches for accommodating switches sockets, regulators with brass screws,washers for One light point controlled by one No. one way 5 Amp switch complete all as specified and directed. Note:- Colour of cables as Phase-Red, Neutral-Black and Earth-Green.

All as per item No 2.10 above but one ceiling/ exhaust fan point controlled by one one way switch 5Amp and regulator

All as per item No 2.10 above but one call bell point controlled by one push button switch.

All as per item No 2.10 above but one 5 Amps 3 pin socket outlet on independent board.

All as per item No 2.10 above butone 5 Amps 3 pin switch socket outlet on same board controlled by one piano switch.

All as per item No 2.10 above but one light point controlled by two switch piano two way

All as per item No 2.10 here-in-before but point wiring for one 3 pin 15 Amps socket point on independent board with 2.5 Sqmm size FRLS PVC insulated, unsheathed, multi stranded, copper conductor cables 1100 volt grade and with 2.5 Sqmm FRLS PVC insulated unsheathed, single core, multistranded copper conductor cable 1100 volt grade as earth wire complete as specified and directed.

All as per item No 2.10 here-in-before but point wiring for one 3 pin 15 Amps socket point on independent board with 4.0 Sqmm size FRLS PVC insulated, unsheathed, multi stranded, copper conductor cables 1100 volt grade and with 4.0 Sqmm FRLS PVC insulated unsheathed, single core, multistranded copper conductor cable 1100 volt grade as earth wire complete as specified and directed.

S&F ceiling rose, 3 phase, PVC/ Polycarbonate, isolated body of required size complete, all as specified and as directed by Engineer-in-Charge.

Fixing only ceiling rose Note:- Serviceable ceiling rose obtained from serial item No. 2.02 here-in-above shall be reused .

S&F switch piano, flush type, single pole, one way 5 Amp, 230 Volts complete all as specified and directed.

S&F switch piano, flush type, 5 Amp, single pole, two way complete all as specified and as directed.

S&F including connection of modular switch piano flush type single pole one way 6 amps 240 volt 1 module complete all as specified and as directed. Make-:Legrand Cat part No 6730 84 or Equivalent make as specified in PS

Fixing only switch piano/Bell push. Note:- Serviceable piano switch/bell push obtained from serial item No. 2.02 here-in-above shall be reused .

S&F switch socket outlet 3 pin, 5 Amps, 2-in-1 complete all as specified and as directed.

S&F modular socket outlet, 6 Amps, 5 pin, flush type 2 module, complete all as specified and directed. Make-:Legrand Cat part No 6730 94 or Equivalent make mentioned in PS

S&F Bell push switch flush type single pole one way 5/6 amps complete all as specified and directed.

S&F Stepped type electronic fan regulator, flush type on the existing phenolic laminated sheet etc complete all as specified and directed.

S&F switch socket combination multipurpose 2 in 1, 3 pin 5/15 Amp flush type, universal, 240 volt grade complete all as specified and directed by Engr-in-charge

Fixing only switch socket outlet 3 pin, 15Amps. Note:- Serviceable switch socket outlet obtained from serial item No. 2.02 here-in-above shall be reused .

S&F including connection of socket 2 in 1, 5 pin 6/16 Amps Modular flush type universal complete all as specified and as directed. Make-:Legrand Cat part No 6730 95 or equivalent from Havells/ABB.

S&F White cover plate with frame, 1 module complete all as specified and as directed.

S&F White cover plate with frame, 2 module complete all as specified and as directed.

S&F Metal flush box 1/2 module complete all as specified and as directed.

S&F Metal flush box 3 module complete all as specified and as directed.

S&F electrical ding dong bell / musical type 230/240 volt single pole, 50 Hz complete all as specified and directed by Engr-in-Charge.

Fixing only tube light fittings, any type, any watt after replacing flexible cable 23/0.0076 fixed to wall and connecting up complete all as specified and as directed by Engineer-in-Charge. Note:- Serviceabletube light fittings obtained from serial item No. 2.02 here-in-above shall be reused .

S&F LED light fitting with LED tube of capacity 18 watt T5 type with integrated electronic driver complete with all accessories internally pre-wired and including connecting up in the same place as in repair complete all as specified and directed. Make:- Bajaj Cat No.BCLSB 18 WH/NW or Surya Cat No. SLE BT 18W ARROW or Crompton Cat No. LCTLN-18-CDL or Equivalent in Philips/Havells/CG/Jaguar/Simoco

S&F LED light fitting with LED tube of capacity 9/10 watt T5 type with integrated electronic driver complete with all accessories internally pre-wired and including connecting up in the same place as in repair complete all as specified and directed. Make:- Bajaj Cat No.BCLSB 10 WH/NW or Surya Cat No. SLE BT 9W ARROW or Crompton Cat No.LCTLN-9/10-CDL or Equivalent in Philips/Havells/Jaguar/Simoco

S&F 3 watt LED square recess mounted light fitting complete with all accessories internally pre-wired and including connecting up in same place including taking down of unserviceable recess mounted Square light fitting, as in repair complete all as specified and directed. Make:- Surya Cat No. SLE DLR 3W XX Stellar SQ or Crompton Cat No. LSCSM-3W-CDL/NW/WW or Bajaj Cat No. BGSLO SLEEK 3W WH RD or Equivalent in Philips/Havells/ Jaguar/Simoco

S&F 8/10 watt LED square recess mounted light fitting complete with all accessories internally pre-wired and including connecting up in same place including taking down of unserviceable recess mounted Square light fitting as in repair complete all as specified and directed. Make:-Crompton Cat No. LSDEP-09-CDL or Bajaj Cat No. BGSLO SLEEK 8W WH SQ or Jaguar Cat No.LNVE025S008XC or Equivalent in Philips/Havells/Surya/Simoco

S&F 5 watt decorative wall light fixture made up of plastic batten with white acrylic cover including necessary fitting including 5 Watt LED bulb complete all as specified and directed. Make:- Crompton Cat No. LCL-07-CDL or Equivalent of Surya/Bajaj /Jaguar/Philips/ Havells/CG.

S&F Surface mounted round LED downlighter with dome shape opal diffuser 6 Watt, 240 volt, high power LED luminaire mounted on MCPCB pasted direcly for better thermal management, constant current driver in-built in luminaire complete with all accessories internally pre-wired as in repair complete all as specified and as directed by Engineer-in-Charge. Make: Bajaj Cat No.BGCML 6W WH or Crompton Cat No. LCDSPLN-R-06-CDL or Equivalent make of Surya/Jaguar/Philips/ Havells/CG/Simoco

S & F Bulk head light fitting (IP65) 10 Watt LED powder coated grey colour finish made up of aluminium PDC housing with opal diffuser with prismatic polycarbonate cover with & including 10W LED tube including electronic driver complete with all accessories internally pre- wired and including connecting up with three core twisted flexible copper conductor cable size 2.5Sqmm, 3 Core fixed to wall /pole as in repair complete all as specified and as directed by Engineer-in-Charge. Make :- Havells Cat No. LHKL01160099 / Simoco Cat No. SLBH10CR or Equivalent make of Surya/ Bajaj/ Crompton/Philips/Jaguar

S&F batten Lamp holder PVC/ polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engineer-in-Charge

S & F Security light fitting of 15watt LED, single piece deep drawn Pressure die-cast powder coated dark graphite grey color finish aluminium housing with prismatic polycarbonate cover (IP-65/66) with individual LED Lense including electronic driver complete with all accessories internally pre- wired and including connecting up with three core twisted flexible copper conductor cable size 2.5Sqmm, 3Core fixed to wall /pole as in repair complete all as specified and as directed by Engineer-in-Charge. Make :- Bajaj Cat No. BCLST 15W LED I / Surya Cat No. SLE UL 15W IP66 LXN/ Crompton Cat No.LSTS-15-CDL or Equivalent of Havells/Philips/Simoco

S&F slim design recess mounted square LED downlighter 12 Watt with white poder coated aluminium housing with integrated electronic driver suitable for pop/grip ceiling complete with all accessories internally pre-wired as in repair complete all as specified and as directed by Engineer-in-Charge. Make: Crompton Cat No.LSDEP-12-CDL / Simoco Cat No. SL-12C-SR or Equivalent make of Jaguar/Philips/ Havells/Bajaj/Jaguar

S&F 36W LED 4000K ultra modern recess mounted luminaries light fitting suitable for armstrong/grid/pop ceiling in M.S housing with opal diffuser & complete with electronic driver & high brightness LED's 36Watt complete with all accessories internally pre-wired including connection copper conductor cable size 2.5Sqmm, 3core passing through PVC flxible conduit from ceiling rose to light fitting connector as in repair complete all as specified and as directed by Engineer-in-Charge. Make :-- Surya Cat No. SLE DS 36 22R / Bajaj Cat No. BCTBLR 36W LED FP CW /Crompton Cat No. LCTLRT-36-FO-CDL /Simoco Cat No. SL-36C-2x2 or Equivalent of Philips/Havells/Jaguar

S&F LED tube rod only polycarbonate material 18 Watt, Suitable for Box type surface mounted 230V, 4 ft etc for existing tube light frame complete all as specified and as directed by Engineer-in-Charge. Make :-- Bajaj Cat No. BLRB 18W CW LED or Surya Cat No. SLE TL-DS 18 PC Reform or Crompton Cat No. LT8-20-865-2 / Simoco Cat No. SL-T5 4F 18WB or Equivalent make of Philips/Havells/Jaguar

Fixing only lamp holder, any type. Note:- Serviceable lamp holder obtained from serial item No. 2.02 here-in-above shall be reused .

S&F Factory made vertical type of MCCB DB TPN 4 way, IP-43 made of sheet steel phosphatised, powder painted with bus bar, neutral link, earth bar and Din rail, 415 Volts with double door complete as specified and directed. Make : Legrand Cat part No 5077 58 or IndoAsian cat No.812045 or Equivalent from other specified make in PS.

S&F sheet metal enclosure MCB DB, TPN, 4 ways, IP-43 made of sheet steel phosphatised, powder painted with bus bar, neutral link, earth bar and Din rail, 415 Volts with single door complete, all as specified and directed by Engineer -in- Charge. Make : Legrand Cat part No 5076 70 or IndoAsian cat No.811833 or Equivalent from other specified make in PS.

S & F sheet metal enclosure MCB double door (IP-43) for load line DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy surface mounting SPN, 8 way, 240 volt, with 200 amps rated bus bar, stove enameled dust and vermin proof suitable for incorporation of MCB’s and isolator etc complete all as specified and as directed by Engineer-in -charge.

S & F sheet metal enclosure double door (IP-43) for load line DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy surface mounting SPN, 4 way, 240 volt, with 200 amps rated bus bar, stove enameled dust and vermin proof suitable for incorporation of MCB’s and isolator etc complete all as specified and as directed by Engineer-in -charge.

S&F MCB, TPN, 40-63 Amps, 415 Volt, breaking cap 10 KA; C-series complete all as specified and as directed by Engineer-in-Charge.

S&F MCB, SPN, 240V, 6 to 32 Amps breaking cap 10 KA; C-series, 240 Volt as in repair complete all as specified and as directed by Engineer-in-Charge.

S&F MCB SP 6 to 32 Amps breaking capacity 10 KA 240 volts, 'C' series, complete all as specified and directed by Engr-in-charge.

S&F MCB, SPN, 40 to 63 Amps breaking capacity 10 KA; C-series, 240 Volt point wiring, complete, all as specified and as directed by Engineer-in-Charge.

Fixing only MCBs SPN of any capacity. Note:- Serviceable MCBs SPN obtained from serial item No. 2.02 here-in-above shall be reused .

Fixing only MCBs SP of any capacity. Note:- Serviceable MCBs SP obtained from serial item No. 2.02 here-in-above shall be reused .

S&F blanking plate for MCBs complete, all as specified and as directed by Engineer-in-Charge.

Taking down unserviceable rusted/ damaged sheet metal enclosure DBs of any size/type/main switch/AC box from wall carefully etc removing material to store for keeping in safe custody or for taking credit and making good to the disturbed surfaces of walls/floors etc complete all as specified and as directed by Engineer-in -charge.

Taking down carefully ceiling fan, sealing cable from its location, disconnection electrical connection from ceiling rose and refixing the same in its original position and connecting up including provision of new flexible cable of suitable size from ceiling rose, sealing cable end and spray painting with one coat synthetic enamel paint including filling cavities with fillers complete all as specified and as directed by Engineer-in-Charge

Taking down old unserviceable sub main wiring any size complete with PVC conduit/ casing capping and removing materials from site and making good disturbed surfaces of walls, etc complete as specified and directed.

M&L for sub main wiring with 2 x 4 Sq mm PVC insulated single core unsheathed stranded copper conductor drawn in and including PVC casing capping including continuous running earth wire by 4.0 Sq mm PVC insulated unsheathed single core stranded copper conductor 1100 volts grade connected to common earth dolly including plastic terminal boxes complete all as specified and directed. Note:- Two runs of 4.0 Sqmm cable and one run of 4.0 Sqmm earth wire and one run of PVC casing-in-caping shall be measured as one unit length.

All as per item No 2.64 above but main wire 2 x 6 Sqmm & earth wire 1 x 6 sqmm. Note:- Two runs of 6.0 Sqmm cable and one run of 6.0 Sqmm earth wire and one run of PVC casing-in-caping shall be measured as one unit length.

All as per item No 2.64 above but main wire 2 x 10 Sqmm & earth wire 1 x 10 sqmm. Note:- Two runs of 10.0 Sqmm cable and one run of 10.0 Sqmm earth wire and one run of PVC casing-in-caping shall be measured as one unit length.

All as per item No 2.64 above but main wire 2 x 2.5 Sqmm & earth wire 1 x 2.5 sqmm. Note:- Two runs of 2.5 Sqmm cable and one run of 2.5 Sqmm earth wire and one run of PVC casing-in-caping shall be measured as one unit length.

All as per item No 2.64 above but main wire 2 x 1.5 Sqmm & earth wire 1 x 1.5 sqmm. Note:- Two runs of 1.5 Sqmm cable and one run of 1.5 Sqmm earth wire and one run of PVC casing-in-caping shall be measured as one unit length.

S&F PVC Casing-in-Caping of size 20/25mm, ISI marked including all fittings and fixing accessories fixed to wall/ceiling for sub main wiring complete all as specified and directed.

S&F Single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps, complete, all as specified and directed. Make - Legrand Cat No-6078 41 or Hager Cat No. VYA120C or Equivalent make specified in PS

S&F as in repair switch socket combination, two in one, 5 pin 5 Amp flush type, complete all as specified and directed by Engr-in-charge.

S&F as in repair switch socket combination multipurpose 2 in 1, 3 pin 5/15 Amp flush type, universal, complete all as specified and directed by Engr-in-charge

S&F as in repair Bell push switch flush type single pole one way 5/6 amps complete all as specified and directed.

S&F as in repair switch piano, flush type , single pole, one way 5 Amp, 230 Volts complete all as specified and directed.

S&F as in repair Bell ding dong / musical type 230 volt 50Hz, single pole complete all as specified and directed by Engr-in-Charge.

S&F as in repair stepped type electronic fan regulator, flush type 300 watt on the existing phenolic laminated sheet etc complete all as specified and directed.

S & F Retro LED T8 tubular lamp only with extruded aluminium body, PC diffuser and inbuilt driver as in repair complete all as specified and as directed by Engineer-in-Charge. Make :- Crompton Cat No. LTT8-20 or Equivalent make of Surya/Havells/ Jaguar /Philips

Supply only capacitor 2.5/3.15 mfd of celling/ wall mounted fan of 230/240 Volts, complete all as specified and directed.

S&F PVC rectangular block with 3mm thick plastic laminated sheet cover of size 350x300x50mm depth fixed properly and to fix/connect the old serviceable switches, sockets, fan regulators etc as in repair complete all as specified and as directed.

All as per item No 2.79 above but size 250x200x50mm depth

All as per item No 2.79 above but size 200x150x50mm depth

All as per item No 2.79 above but size 175x100x50mm depth

All as per item No 2.79 above but size 100x100x50mm depth

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1metre apart including 4mm suspension wire, one twin core cable flat or circular of 10 Sqmm, as in repair complete all as directed by Engineer in charge.

All as per item No 2.84 above but 6 Sqmm 2 core

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edged of the plate not less than 1.5 mtr below normal ground level, connected to galavanised iron earth lead by means of bolt, nut, check nut and washer of galavanised iron steel wire 4mm dia as earthing lead as shown inelectrical plate No 3 of MES Sch Part-I:2009, connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/ loose soil, earth pit in PCC (1:3:6) type C1 using 20mm stone aggreate, funnel, 20mm dia GI med grade water pipe, 15mm dia GI light grade earth lead protection pipe, MS angle frame 40x40x3mm, 40mm thick RCC (1:2:4) type B1 cover reinforced with 6mm dia MS bars @ 75mm c/c both ways and MS handle made out of 12mm dia bar, PGI funnel, wire mesh, charcoal or coke and common salt in alterative layer all around the earth electrode compacted thickness 15 cm including excavation and earth work pit cover including disposal of surplus soil to a distance not excessding 50m and white washing of earth chamber, complete testing on completion all complete as shown in electrical plate No 3 of MES Sch Part-I: 2009 & as directed by Engr-In-Charge.

M/s Torrent Inc

M.S. Construction

Purbanchal Construction Co

Ms Sukumar Talukdar and Co.