Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | FIRST₹35.2 LAccepted-AOC | FIRST | Accepted-AOC BEING LOWEST | |
| 2 | SECOND₹40.6 LRejected-Finance | SECOND | Rejected-Finance BEING NOT LOWEST | |
| 3 | THIRD₹46.7 LRejected-Finance 26 3 3RD CROSS GANESHA BLOCK SULTANPALYA RT NAGAR POST BANGALORE 560 032 | BANGALORE | BANGALORE | KARNATAKA | 560032 | THIRD | Rejected-Finance BEING NOT LOWEST |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
3 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF MARATHAHALLI
GE AF MARATHAHALLI WIND TUNNEL ROAD, KEMPAPURA, YEMALUR POST, BANGALORE. PIN- 560037
PROVN OF WORKS SERVICES FOR SETTING OF KU BAND SATCOM AT ASTE AND PROVISION OF UTENSIL RACK IN SMQs AT AKASH VIHAR UNDER GE AF MARATHAHALLI
2023_MES_600142_1
8622/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF MARATHAHALLI
7 documents required · 7 mandatory
₹500
GE AF MARATHAHALLI
₹88,000
Yes
21 Jul 2023
1 Jun 2023
8 Jul 2023
1 Jun 2023
3 Jul 2023
15 Jun 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar , incl all quions, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.
Material and labour for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width Type C1 1:3:6 (20 mm graded aggregate ) and setting in mortar CM 1:6, complete all as specified and directed.
M&L for concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in foundation, filling and mass concrete complete all as specified and directed.
Removing building materials etc. to a distance of 5 Km out side MoD/Unit land including loading, unloading and stacking at the destination etc.complete all as specified and directed.
Material and Labour for PCC (1:2:4) type B1 using 20 mm graded crushed stone aggregate as in coping, mud stops, benching, water tank platform etc.on roof, chajja weathering, slightly rounded or chamfered angles and throating etc. including necessary form work complete all as specified and directed.
M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:4 complete all as specified and directed.
M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surfaces such as skirtings, dados and risers to steps etc.. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering on brick work or concrete surfaced wall as backing coat of cement mortar 1:3 complete all as specified and directed.
M & L chequered cement concrete tiles 200 x 200 x 25 mm thick set and pointed in neat cement slurry as in floors over and including cement screed base 20mm screed bed in cement mortar 1:6 complete all as specified and directed.
S&F false ceiling grid of size 600 x 600 mm system using hot dipped galvanized steel section with precoated capping, main tee of size 24x32 mm having 0.27mm thick at every 1200mm centre to centre, cross tee of size 24x27 mm having 0.25mm thick at 600mm centre to centre and wall angle of size 19x19 mm having 0.35 mm thick fixed to the periphery of the wall, and suspended at every 1200mm centre to centre in both directed using 2.00 mm thick GI wire and fixing 600 x 600 x 16 mm mineral fibre tegular edge ceiling tiles of RH90 complete all as specified and as directed.
S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings complete all as specified and directed.
S&F powder coated anodised alluminium door shutters, aluminium sections weighing 0.55 Kg/m including joining cleats glazing clips, rubber neoprene packing , handle 2 Nos in each door, hinges, anodised aluminium snap, mortice lock, beading screws, bearings etc. complete all as specified and as directed by Engr-in-Charge.
Provision of 5.5 mm thick tinted glass exc 0.5 sqm of each pane of superior quality fixed to alluminium frame works with rubber beadings including solar control film of 25 micron reflective type sicked to glass panes as per instructions of manufacturers Complete all as specified and as directed by Engr-in-Charge.
S&F for 12mm thick prelaminated particle board fixed to aluminium framework, complete all as directed by Engr-in-Charge.
S&F Aluminium (Extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as directed by Engr-in-Charge.
M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc. complete.
S&F Floor door stopper 150mm length of cover plate aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in doors , complete all as specified and directed.
S&F Aluminium Mortice lock of 4 levers in vertical type of size 100 mm
M&L for preparation of Old surface of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint including one coat of 3 mm thick white putty on plastered surfaces etc including complete removal of existing surfaces of any etc. complete all as specified.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in ridges to wall, fixed with self tapping screws as specified
S&F Steel work in tubular trusses including special shaped washer etc. Complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240, Complete all as specified and directed.
S&F rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment as in gusset plate conforming ot Fe- 410-W-(Gde-E-250) quality A etc complete.
Preparation of new surfaces of steel and iron surface of any description, not otherwise descriped over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
Taking down carefully copper/aluminium point wiring of any type of batten or conduit (Light, Fan, Socket or power) complete removing material from site and making good the disturbed surfaces of walls, roofs etc including two coats of white/colour washing/distempering etc to match the existing complete all as directed by EIC.
Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surface of walls as directed.
Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls etc complete all as specified and directed.
M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through PVC concealed conduit of suitable size, complete with all PVC conduit accessories/ fittings, brass screws, washers etc, including metal flux boxes of suitable size and modular white plate with frame for mounting modular switches, sockets and regulators etc, including all cutting/chases etc in walls and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One light point /Fan point controlled by one switch.
Description all as per item No 30 above but One 5 Amps socket point on same board with other switches
Description all as per item No30 above but One 5 Amps socket point on independent board.
Description all as per item No 30 above but wiring complete with 2.5 Sqmm cable for 3 pin 15A socket multipurpose on independent board .
Description all as per item No30 above but wiring complete with 4.0 Sqmm cable for 3 pin 15/30 A socket multipurpose on independent board .
Material and Labour for ceiling rose 3 terminals complete all as specified & directed.
Supply & fixing modular switch 06 Amps 1 module complete all as specified & directed
S & F modular socket 06 Amps 2/3 pin combined 2 module complete all as specified & directed.
Supply & fixing modular switch 16 Amps 1 module complete all as specified & directed
S & F modular socket 06/16 Amps 2/3 pin combined 2 module complete all as specified & directed.
Supply and fixing 36W LED Fitting, 2 x 2 recess / Surface LED flat panel with high brightness LED for glare free homogenous illumination including LED driver complete all as specified.
S&F in replacement single pole and neutral enclosure with two pin and earth plug and socket including 1Nos MCB 20 Amps capacity complete all as specified and directed by Engr-in-charge
S & F MCB TPN 40/63 Amps incl making connections all as specified and directed.
S & F MCB SP 6-32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed.
S & F MCCB DB Vertical TPN 4 Way 'A' Frame,Including MCCB TPN 63 Amp Beaking capacity 25Ka -01 nos, Double Door flush to wall including all cutting etc on wall including making good the disturbed surfaces to match the existing in replacement of old U/s complete all as specified and directed.
M & L for sub main wiring complete with two runs of 4 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit/ casing caping of suitable size and accessories in concealed/surface of wall, roofs etc with one run of PVC insulated copper conductor 4.0 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.
Supply and fixing of Endura Citylite Platinum, 35 W LED Street Light fittingpressure die cast aluminium housing, heat resistance toughened glass, IP-65/66 protection including with bracket made out of GI pipe 32 mm , with clamps and nut bolts complete all as specified and directed.
Supply and fixing in repair of Earthing to panel with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete all as specified and directed.
Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser for better indoor air quality with minimum 5 star rating EER 3.2 of capacity 1.5 TR including with all accessories and necessary connection complete all as specified and directed by Engr-in-Charge. (Make:- Carrier /Voltas/Blue Star/LG) (Note :- The extra length of suitable size of AC gas copper pipe / cable for installation of AC as per site requirement is deemed to be included in the quoted rate.)
Supply and installation of Voltage stablizer for automatic operation, single phase naturally air cooled indoor type wall mounted copper wound and dsigned for input variation between 170 Volts to 250 Volts with output Voltage Stablizer at 230 with of +- 2.5% and capacity of 5.0 KVA with digital voltmeter and suitable capacity plug top complete all as specified and as directed. Make: V-Gaurd /Volina/ AE.
M&L for mild steel stand duly painted suitable for fixing 3/2/1.5 TR AC out door unit fixing in wall / floor, including making bore required size for copper pipe & copper cable with sweating pipe required size and length upto ground level complete all as spcecified and directed.
S&F Intelligent analog addressable Multisensory smoke & thermal detectors with base, and the detector shall be suitable for a common base across the system. The addressing on the system could be either with DIP switch setting/ rotary or software programmed. The detector shall be working on a fast/smouldering smokes & also for the desicipated heat across a given said area of coverage.
S&FIntelligent analog addressable manual call point the call station shall be suitable to be fixed on a common 3"x3" junction box and shall be of the resettable type. The manual call point shall be made of 16 SWG sheet metal and shall be painted red. There shall be a preference to have LED indications on the call point for alarm condition. The cables entering the box shall be made to run through conduit which shall be concealed. The call point module shall be housed inside the back box and shall be easily accessible in case of any functional failure.
S&F Intelligent analog addressable Electronic sounder cum strobe complete all as specified and as directed
S&F Intelligent analog response indicators complete all as specified and as directed
S&F 04 zone loop analog addressable fire alarm control panel with capacity to take 20 detectors or devices per loop and shall have a built in battery back up of 48 hrs back up under normal condition and 8 hours back up against the alarm condition.The panel shall also be able to cater for the repeater and networking functions for any future expansions. The panel shall have an inbuilt capacity or externally connected to the voice annunciation system, such as telephone dialer and speech processor. There shall be suitable earthing done for the panel.
Supply, Installation, commissioning and testing of Isolator base fully monitored for short/ open circuit compatible with ESP Analogue addresseble protocol, electronically addressed approved by LPCB, unit incorporated an amber LED to show when it is isolating a section of a loop complete all as specified and directed by Engr-in-Charge.
S& F Armoured shielded, sheathed and twin twisted wires inside the armoured cable, 1100 V grade with copper conductor complete with fixing accessories such as spacer plates saddle/wall clips etc of size 1.5 sqmm 04 core complete all as specified and as directed.
Excavation in trenches in soft/loose soil not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out for taking up / laying under ground electric cable including taking out old bricks from trenches and separating serviceable bricks and set aside for reuse complete all as specified and as directed.
Returning, filling in, including spreading levelling watering and well rammming in layers not exceeding 25 cms in depth complete all as specified and as directed.
Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.
Supply, laying riddled earth soil conformed IS-1255, cushioning to cables with a layer of riddle earth soil 15cm deep before laying the cable and 8 cm depth after laying of cable, complete all as specified.
M&L for Brick protection cover on cable with sub class 'B' brick, laid dry and flat adjacent to each other complete all as specified.
Supply and fixing of GI tubing, light grade, 50 mm bore with all fitting lais in trenches / pole / wall for protection of cables in repairs complete. Make - TATA / JINDAL / Bansal .
Supply and laying cable XLPE insulated screened, PVC bedded, galvanised, steel strip or wire armoured, electric power cable, (heavy duty) 1100 volts grade, with stranded aluminium conductor of size 3.5 core x 120 Sqmm (From Existing AMF Panel to Exist LT Panel)
Description all as per item No 64 above, but, of size 16 Sqmm 4 core
Supply, erection, testing and commissioning KIOSK outdoor type LT feeder pillar box of minimum size 900mm(height) x 600mm (breath) x 500mm (depth) platform mounted, suitable for 3 phase 4 wire, 500 volts AC supply and having 4 Nos aluminium bus bar for distribution system and type tested at CPRI fabricated .The feeder pillar shall be made out of 3.00mm thick CRCA mild steel sheet and 3.00mm thick gland plate duly compartmentalized for each control gear and bus-bar, double door front door (02 layer) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and mild steel angle iron legs of minimum size angle iron 25x3 mm . The feeder pillar shall be provided with ventilation facility in the form of louvers for better heat dissipation. The feeder pillar shall be provided with suitable Neoprene rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947 and including complete internal wiring with 1.5 sqmm copper wire and copper strip/wire from busbar to MCB input and MCB to cable connector of suitable length including PCC (1:3:6) type C-2 as in foundation of suitable size (30 cm below ground level & 40 cm above ground level) including necessary excavation and earth work complete all as specified and as directed alongwith comprising of the following accessories :-
M & L for Earthing complete with galvanized iron or steel plate electrode 600 mm x 600 mm x 6.0 mm buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron strip 25 x 3mm dia as earthing lead by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to machinery/ equipment all as shown in electrical plate No. 5 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore light grade GI pipe for watering funnel wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified.
S& F stainless steel plate rack made out of 1 mm thick stainless steel sheet of grade 304 and of size 31"x24"x10" inch( 786mm x 610mm x 254mm) having 03 shelves and having provision for plates, bowls and other utensils complete all as specified and as approved by Accepting officer.The contractor shall submit test cerificate from tha approved lab for the quality of Stainless steel used in plate racks. Make:- PRAYAG/ BLUE STAR/ NIRALI
S& F AC load manager with built in programme for on/off of 2 Nos of 1.5/2.0 TR capacity sp;it type AC's suitable for operating on single phase 230 volts all as specified and directed.
Pacific Enterprises
G K CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .