WBPHE/EE/SMD/NIeT-28 of 2016-17/5

Amount

Supply and delivery at site of the following submersible pumping machinery and electrical accessories:

Submersible pumping machinery directly coupled with water proof suitable size motor having following specification: Pump Duty condition- 557 LPM Head- 46 Mtr Shaft-stainless steel Impeller- S.S/ Bronze Outlet Size: 80 mm. Motor submersible type 3 Ph , 50Hz, 400 Volt ± 10% 2900 RPM Motor must be suitable for operation with star delta starter. Make -Texmo/Pluga/BG/KSB Test certificate along with characteristic curve should be submitted at the time of delivery Riverrine charges @5% included

6 sq.mm x 3 Core water proof flat cable suitable for above motor [make- Finolex/Emgee/Gloster] Riverrine charges @5% included

35 sq.mm 3.5core PVC AL. XLPE armoured cable [Gloster/netco/Polycab] as per IS-7098[I] Riverrine charges @5% included

Supply, delivery and storage at site of Wall mounted 2 mm. thick epoxy painted sheet steel enclosed front open fully automatic cum manual control motor control centre for operation of the pump motor in star/ delta mode ranging from 7.5 HP TO 15 HP. , actuator with RDOL starter, Chlorinator with DOL starter and timer operated outdoor and indoor lighting and also spares feeder as per approved drawing and NIT specification: Make of panel: PCE Projects Pvt. Ltd./ ECS/ System control and automation/ RNR industries Riverrine charges @5% included

Supply and delivery of the following valves, pipes and gauges etc at site:

3 mtr long 80mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG. [Make – Ashirbad] Riverrine charges @5% included

1.5 mtr long 80mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG. [Make – Ashirbad] Riverrine charges @5% included

80mm dia CI top & bottom adopter Riverrine charges @5% included

Heavy type suitable dia MS suspension clamp along with nuts bolts and washer Riverrine charges @5% included

3 phase actuator operated wafer type butterfly valve of 80 mm. dia [PN-1.0] as per IS; 13095, IP-68 Make: Actuator- Rotork/ Limitork/ Marsh/ Auma, Valve-IVI/IVC/AUDCO/JUPITER Riverrine charges @5% included

80mm dia CIDF sluice valve , Non Return Valve, enlarger bend, short piece of required length C.I. tee plug, flanges etc as per IS specification and certification for construction of delivery pipe line and wash out line Valve- IVI/IVC/KBL/Kalpana Riverrine charges @5% included

Heavy type 250mm dia split type tube well cover with 12 mm thick clamping arrangement including holes of column pipe, air pipe and cable entry with 2 sets heavy type suspension clump, nuts, bolts and washer as per departmental design Riverrine charges @5% included

Depth gauge [H Guru/Febig] 100mm dia with steel air pipe of required length with all accessories for the above work including supply of good quality hand pump[This cost includes 15 mm. dia G.I. pies and specials] Riverrine charges @5% included

Pressure gauge [H.Guru/Febig] 150mm dia [0-7Kg/Sq.cm] brass cock and fitting complete[This cost includes 15 mm. dia G.I. pies and specials] Riverrine charges @5% included

g) 50 mm. dia. non metalic pipes (IS:14930) and specials for protection of submersible cable Riverrine charges @5% included

h) Anti snapping safety device for pump set by supplying suitable size MS clamps two sets and nylon rope of required length including supplying of nuts, bolts and all other materials. Riverrine charges @5% included

Supply and fitting fixing of 100 Amps male female kit Kat fuse unit

Laying of 25 sq. mm. 3.5 core AL. ar. Cable in wall/ floor by supplying of all necessary materials as per IE Rules and as per direction.

Installation of above pump motor, panel, valves and specials as in sl. NO. 1, 2 & 3 including supply of cable gland, sockets etc including brick, sand, cement rod stc as required to complete the job as per direction and up to the entire satisfaction of the EIC.

Making brick pillar 0.25 mtr x0.25 mtr. for supporting of valves and pipes with 12 mm thick plaster and net cement finish complete

Making suitable size pump foundation with supplying of necessary cement, sand and stone chips including plastering and net cement finish complete

Making double earthing arrangement in compliance with IE rules by G.I. pipe electrode of 50 mm. dia 3 mtr. Long 2 Nos for panel and pumping machinery 25 mm. x 6 mm. G.I. earth strips from earth pit to panel and all other accessories required to complete the work.

Making internal electrification of pump house consisting of one bracket point, one tube light point, two bulk head point and 1 NO. 70 watt HPSV fixture with arm bracket at outside and one three pin plug point including supply of all necessary materials to complete the work as per IE rules and as per direction

Commissioning of the installation with full satisfaction of EIC and trial run as per departmental operation & guarding by engaging skilled staff for 3 months.

ANJAN ENTERPRISE

BIJAN ENTERPRISE