8948/E8

Amount

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2.0 Sqm each complete all as specified and directed.

S&F factory made solid PVC door Frame of size 50 mmx47 mm made out of 5mm thick wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced MS square tube supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles) with 2,4, or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifications and drawing of page no 146 of SSR Part -II complete all as specified and directed.

S&F35mm factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003(Part - I) kiln seasoned and chemically pressure treated (35 mm thick with 2nd class HW rail and style) complete all as specified and directed.

S&F 2nd class hardwood plain solid, straight chowkat and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints all as specified in and directed.

S&F mild steel flat iron as in hold fast for door window frames or chowkat etc. cut to length or drilled hole and fixed with screw etc. complete all as directed grade of steel conforming to Fe-290 Gde-E-165

S&F Stainless Steel butt hinges medium weight of size 100 mm complete all as specified and directed.

S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed .

S&F MS butt hinges medium weight cold rolled of size 100 mm complete all as specified and as directed.

M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down cement plaster on brick or concrete wall/ceiling etc including racking out joint hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L 15mm thick plastering in cement mortar on brick/concrete wall surfaces in CM (1:6) and finishing the surfaces even and smooth without using extra cement complete all as specified & directed.

M&L rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings and finishing the surfaces even and smooth without using extra cement complete all as specified & directed.

M&L preparing new surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L preparing new surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

S&F Glazed ceramic coloured tiles in vertical surface 450x300x7mm thick including 10 mm thick backing coat in cement moartar in 1:4, set and jointed in neat cement slury and pointed in coloured cement to match.

S&F Non skid ceramic coloured tiles 7 to 8mm th area of each tile exceeding 0.11sqm but not exc 0.18 sqm in floors including 15 mm thich screed bed in cement mortar 1:6, set and joined in neat cement slury and pointed in coloured cement to match all as specified and as directed.

M&L vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors including 15 mm thich screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or colured cement to matches light shed.

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) light shade polished, in skirting/dado including 10 mm thick backing coat in cement moartar in 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.

S&F door closer hydraulically regulated designation No. 1 universal type cast iron body sutable for door and shutter up to 700 mm width and of weight not more than 35 Kgs and fixed all as specified and as directed.

S&F sink made of stainless steel 1mm thick kitchen or laboratory with plug, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and directed including taking down old one

Taking down aluminium window/ventilator with side hung,top hung or fixed type,sliding shutter of any description.

S&F in repair powder coated anodised aluminium window / ventilator shutters, sliding type with styles, rails, sash bar, sliding frame etc. all are made from anodised aluminium section all are made from anodised aluminium section weighting 0.55 kg / m including necessary jointing cleats, glazing clips, rubber packing, anodised, aluminium snap beadings, screws , aluminium handles, locking system etc complete all as specified and directed.

S&F sheet glass 5 mm thick ordinary quality and glazing with oil putty or glazing pins / spring clip in square, rectangle in each pan all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed including taking down old one

S&F anodised aluminium grill, having mesh size 75mmx75mm made out 4mm wide and 3mm thick aluminium section with MS hooks of 6mm round bars two numbers each side insert into the jambs/cill complete all as specified and directed including taking down old one

S&F tubular/towel rail chromium plated 20mm dia 'D' type 600 mm long including brass screws and wooden / plastic cleats complete all as specified and directed including taking down old one.(Make-Jaquar model No- ACN-1111NM or equivalent)

Scrapping worn out tarfelt and bituminous compound of water proofing treatment over RCC roof by using wire brush and blow lamps including dismantling cracked/broken PCC (if required sweeping, cleaning washing down to remove dust etc and removing rubbish debris etc to a distance n.exc 50 m from the site (s) complete all as specified & directed.

M&L water proofing treatment on cleaned RCC roof comprising with the following operation and as specified here-in-below :- (a) 20 mm thick (av. mimimum thickness) plastering in cement mortar 1:3 finishing the plastered surfaces even and smooth over cleaned RCC roof. The plastered surface shall be cured properly for ten days by ponding of water over roof. (b) Applying bitumen primer over the plastered surface @ 0.40 Ltr / Sqm by the same membrane manufacturer of density at 25°C, 0.87 to 0.89 kg / Liter and viscosity 70-160 cps. (c) Providing and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt make as approved over the primer coat. Membrane shall be laid using butane torch and sealing all joints etc all as per Para 11.44.5 of SSR Part I. (d) Applying one coat of Aluminium paint @ 0.1 ltr per Sqm over APP based polymetric membrane complete all as per manufacturer's instruction.

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal complete all as specified and directed.

S&F 15mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors at any level complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removal complete all as specified and directed.

Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

M&L UPVC Brass fittings like Brass elbow / Tee / Sockets / Reducing sockets / MBTA / FBTA / Union / Adaptor etc. suitable for fixing with steel pipe 20 mm dia CPVC pipe fixed in wall / floor complete all as specified and directed.

S&F 20mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors at any level complete all as specified and directed.

Taking up or down 25 mm bore steel water tubing and connections including cleaning for refixing or removal all as specified and directed for work upto 4 th storied.

Supplying and laying of 25mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified for work upto 4 th storey.

M&L UPVC Brass fittings like Brass elbow / Tee / Sockets / Reducing sockets / MBTA / FBTA / Union / Adaptor etc. suitable for fixing with steel pipe 25 mm dia CPVC pipe fixed in wall / floor complete all as specified and directed.

S&F 25mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors at any level complete all as specified and directed.

S&F 15mm bore chromium plated single lever wall mixture with provn of hand shower complete all as specified and directed (Make Jaquor model No FUS 29119 or equivalent)

S&F 15mm bore angular stop cock with wall flange complete all as specified and directed (Make : Jaquor model No FUS 29053 or equivalent) including taking down old one

S&F 15mm bore 2-way bib cock with wall flange compelte all as specified and directed (Make : Jaquor model No FUS29041 or equivalent)

S&F wash basin mixture with single lever extended basin mixer (height 85mm) without popup waste system with 450mm long braided hoses complete all as specified and directed (make Jaquor model No FUS-29023B or equivalent) including taking down old one.

S&F 15mm Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed but fancy type completed all as specified and as directed, including taking out old one.

S&F 15mm bore single lever sink mixer with swinging spout on upper side (wall mounted model) with connecting legs & wall flanges complete all as specified and directed including taking down old one.

S&F Hand shower 125 mm dia single flow ABS body chromium plated with grey face plate for fixing with 15 mm pipe complete all as specified and directed including taking down old one. (Make : Jaquar model No - HSH - 1937)

S&F chromium plated hand shower health faucet ABB body with 8 mm dia. 1.00 m long CP flexible pipe 15 mm bore with wall hook complete all as specified and directed including taking down old one. (Make Jaquar code no ALD-CHR-583 or equivalent ).

S&F 10 Ltr capacity PVC valveless syphonic action flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required and as directed including taking down old one.

S&F galvanised iron snap grip frame work made from galvanised iron main/cross tee of size 38mm x 24mm x 0.32mm weighing 0.28Kg/RM and 28mm x 24mm x 0.30 mm weighing 0.22 Kg/RM respectively for false ceiling of grid size 600mm x 600mm including necessary hanging arrangement comprising of 4mmm dia MS rod, 'J' bolt with necessary bolts, nuts and washer all as per manufacturer's instruction complete all as specfied and as directed. The snap grid (main & cross section) shall supported at ends all along the wall with galvanised iron angle of size 22mm x 22 mm x 0.40mm weighing 0.15 Kg/RM complete as per manufacturer's instruction and as specified and directed.including taking down old one

M&L for providing pre painted fibre cement board 6mm thick in ceiling fixed on GI snap grid as per manufacturer's instruction complete all as specified and directed.including taking down old one

S&F Stainless steel grating dome 125 mm dia (minimum weight 25 gms) complete all as specified and directed including taking out old one.

S&F 32 mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed full threaded complete all as specified and directed including taking out old one.

Hacking out old broken glass (any thickness size, quality or description) including punching or drilling out old glazing pins/spring clips and providing and fixing new ones area exceeding 1.5 sqm complete all as specified and directed.

S&F sheet glass 3.00 mm thick ordinary quality and glazing with oil putty or wooden beads in square, rectangle all as specified and as directed.

S&F sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or glazing pins / spring clip in square, rectangle in each pan all as specified and as directed.

S&F 125 mm size extruded brass handles fabricated type, polished complete all as specified and directed including down old one.

M&L 25mm dia stainless steel curtain rod with catrip type with hooks/brackets fixed on walls complete all as specified and directed including taking down old one.

S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directe including old down

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed including down old one.

S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed including down old one.

MS JYOTI INDUSTRIES

ARJUN DAS VALECHA

BURO ENTERPRISE

EAST COAST STANDARD PRODUCTS

MS HORIZEN

M A ENTERPRISES

MARUTI ENTERPRISES