Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.4 LAccepted-AOC | L1 | Accepted-AOC Quoted rates of lowest bidder found reasonable hence accepted | |
| 2 | L2₹20.6 L+₹22,603.08 (1.11%)Rejected-AOC | L2 | Rejected-AOC Quoted rates are high hence rejected | |
| 3 | L3₹20.9 L+₹51,396.49 (2.52%)Rejected-AOC | L3 | Rejected-AOC Quoted rates are high hence rejected | |
| 4 | L4₹21.3 L+₹90,364.29 (4.43%)Rejected-AOC | L4 | Rejected-AOC Quoted rates are high hence rejected | |
| 5 | L5₹21.6 L+₹1.2 L (6.12%)Rejected-AOC | L5 | Rejected-AOC Quoted rates are high hence rejected |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
18 Jun 2022, 6:00 pmClosed
Mr Rohan Sonkar, IDSE
GE TAWANG Pin- 900198 C/o 99 APO
REPAIR / MAINTENANCE OF DRAIN, PCC PATH AND OTHER CONNECTED WORK AT 112 ENGR REGT, 323 FD REGT, 22 RAJPUT, 11 JAK RIF UNDER GE TAWANG
2022_MES_526955_1
8480/GE/TWG OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
Tawang
REFER TENDER DOCUMENTS
5 documents required · 5 mandatory
₹500
GE TAWANG
₹40,000
28 Jul 2022
28 May 2022
25 Jun 2022
28 May 2022
18 Jun 2022
11 Jun 2022
28 May 2022 - 4 Jun 2022
Amount
Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.
Materials and labour for 100mm thick PCC (1:2:4) Type B-2, (using 40mm graded aggregate) as in footpath, hardstanding, finishing cement concrete surface by making impessions of expanded metal whilst the concrete is green complete all as specified and directed.
Materials and labour for broken stone or boulder hardcore of gauge n exe 63mm deposited, spread and levelled in layers n exe 15cm thick, watered and rammed to a true surface complete all as specified and directed.
Materials and labour for 75 mm plain Cement Concrete (1:3:6), type C-2 (using 40 mm graded stone aggregate) as in sub-base floors, plinth protection finished the surfaces of concrete even and fair complete all as specified and directed.
Materials and labour for providing screed bed or bedding layer of cement mortar (1:6), 15 mm thick for laying floor finishes/tiles complete all as specified and directed.
Materials & labour for Prepolished coloured cement concrete chequered tiles with glazed finished of size 300x300x25mm and jointed in neat cement slurry and pointed in colour cement to match the shade of the tiles as in paving/foot path etc as required complete as per manufacturer’s instructions and as directed.
Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Materials and labour for plain Cement Concrete (1:3:6) type C-2, using 40 mm graded stone aggregate as in surface channel and drain complete all as specified and directed.
Materials and labour for formwork to faces of walls, retaining walls, abutments, parapets and stair case railing and similar work including attached pilaster, buttresses etc; vertical or to batter, flat faced with rough finished surfaces of concrete complete all as specified and directed.
Materials and Labour for Extra for forming fair finishing to surfaces drain/channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds etc complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Materials and labour for pre-cast cement concrete (1:2:4), type B-1, using 20 mm graded stone aggregate as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar (1:4), complete all as specified and directed.
M&L TMT bars 10 mm dia and over, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spi-rally hooping for columns, hook-ing ends and binding with and including mild steel wire (an-nealed) not less than 0.90mm dia, complete all as specified and directed.
M&L TMT bars 8 to 10 mm dia in stirrups, spacers and binders, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.
M/S T D Enterprises
L T CONSTRUCTION
M/S L G BUILDERS
M/S ARUNACHAL VIKASH
M/S ACE BUILDERS
M/S KHANDU CONSTRUCTION
M/S N T BROTHERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .