S/R to NH-5 to Ardalua Road From 14/200 Km to 14/850 Km and 15/090 Km to 18/000 Km for the year 2026-27. (Such as surface repair with WMM, BUSG,PMC and SC in stretches)

Providing,Laying spreading & compacting graded stone aggregates to WMM specication in Table-400-1 of MoRT&H Specification (4th Revision)spreading in layers with motor grader not exceeding 22.5Cm on prepared surface,after mixing by mix in place method with rotovator at OMC,compacting to the required density by Vibratory Roller with cost , conveyance, royalities,taxes of all materials, all labours,T&P sundries,hire and running charges of V.R.R and all other mechineries complete as per MoRT&H Specification (5th Revision) clause-401 and direction of Engineering-in-charge.

Cleaning road surface with mechanical broom and air compressor and applying Primer coat over Granular surface as preparatory for a bitumineous layer with 6.0Kg of M.S Emulsion per 10.0 sqm.using Emulsion pressure distributor on the prepared surface with cost ,coveyance,taxes of all material,all labour,hire and running charges of all machineries,T&Psundries etc complete as per MoRT&H Specification (5th Revision) clause-503 and direction of Engineering-in-charge.

Providing & Laying B.U.S.G. of 75mm thick in two layer using tack coat 3.0kg/10 sqm 25mm to 40mm size B.H.G.C.B.metal of 0.45cum & 12.0kg of 80/100 penetration grade of bitumen in one layer with 0.12 cum of 12mm size B.H.G.C.B.chips as key stone per 10sqm and laying & spreadig including heating, pouring and spreading bitumen &materials after cleaning the road surface and rolling with PRR including hire charges of PRR & cost, conveyance, royality of all materials & cost of T& P, labour charges etc complete as per specifications and direction of Engineer In Charge

Providing & Laying Built Up Spray Grout (BUSG) of 37.5mm thick in one layer using tack coat 3.0kg/10 sqm with 25mm to 40mm size B.H.G.C.B.metal of 0.45cum & 12.0kg of 80/100 penetration grade of bitumen in one layer with 0.12 cum of 12mm size B.H.G.C.B.chips as key stone per 10 sqm and laying & spreadig including heating, pouring and spreading bitumen &materials after cleaning the road surface and rolling with PRR including hire charges of PRR & cost, conveyance, royality of all materials & cost of T& P, labour charges etc complete as per specifications and direction of Engineer In Charge

Cleaning road surface with mechanical broom and air compressor and applying tack coat over bitumineous surface as preparatory for a bitumineous layer with 2.0Kg of 60/70 penetration grade bitumen per 10.0 sqm.using Bitumen pressure distributor on the prepared surface with cost ,coveyance,taxes of all material,all labour,hire and running charges of all machineries,T&Psundries etc complete as per MoRT&H Specification (5th Revision) clause-503 and direction of Engineering-in-charge.

Providing & Laying 20mm Thick premix carpet using 0.27cum of 13.2mm to 5.6mm size crushed stone chipping and 14.60kg. penetration grade of bitumen for 10sqm including hand packing to proper camber and consolidation with PRR including hire and running charges of PRR, hot mix plant, bitumen boilers and all other T & P articles & cost, conveyance, royality of all materials & cost of T& P, labour charges etc complete as per specifications and direction of Engineer In Charge

Providing & Laying 6mm thick precoated seal coat Type-B using 0.06 cum of 6.7mm size chips as per sieve analysis and 6.8Kg of bitumen per 10sqm.including hire and running charges of PRR, hot mix plant, tar boiler and all other T&P articles& cost, conveyance, royality of all materials & cost of T& P, labour charges etc complete as per specifications and direction of Engineer In Charge