Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹7.6 L
EMD Value
₹16,000
Closing Date
28 Nov 2019, 5:00 pmClosed
Lalit Jindal
Xen (E) Gurugram
SPECIAL REPAIR OF E.I. IN WOMEN HOSTAL AT GURUGRAM
2019_HRY_109325_1
SPECIAL REPAIR OF E.I. IN WOMEN HOSTAL AT GURUGR
Open Tender
Electrical Works
Works
60 days
Xen (E) Gurugram
Refer DNIT
3 documents required · 3 mandatory
₹1,000
Yes
Executive Engineer, Electrical Division, Hr.P.W.D
₹16,000
Yes
3 May 2020
19 Nov 2019
30 Nov 2019
19 Nov 2019
28 Nov 2019
19 Nov 2019
Amount
Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. Make L&T/ABB/ Havells / Standard 15 amp.to 60 amp. 415 V ,10 KA 3-phase.
100 amp.to 220 amp.415 V,10 KA 3-phase.
Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. Make L&T/ABB/ Havells / Standard S.P.N. enclosure for single pole MCB 20 amp.
Supply and erection of blanking sheet in existing distribution board.
Supply and erection of miniature circuit breaker/ isolator 240/415 V in the existing distribution board including making necessary connection. Make L&T/ABB/ Havells / Standard Miniature circuit breakers of 9 KA breaking capacity.SP MCB of 9 KA breaking capacity 6 amp. to 32 amp.
SPN MCB of 9 KA breaking capacity 6 amp. To 32 amp.
TPN MCB of 9 KA breaking capacity 6 amp. to 32 amp.
Supply and erection of Fittings and Accessories.Anodised aluminium bracket made of square rod of section 18 mm ,140 mm long with aluminium base 80 mm dia , 1.2 mm thick 25 mm high complete with brass holder with necessary wire for connections etc. as per approved design.
Call bell 220 / 230 volts A.C. bakelite with double coil.
Bell push flush type ( without flexible wire ) in existing sheet.
Bakelite angle / straight button holder large size.
Supply and erection of rectangular bulk head fitting of size 17 cm x 14 cm, aluminium casted with aluminium colour out side and white stove enamelled inside/complete with guard, glass etc. secured by brass screws suitable upto 100 watts lamp with B.C. lamp holder but without lamp.
Erection only of 1x40 watts or 2x40 watts 1220 mm long /1x20 watts or 2x20 watts ,610 mm long fluorescent tube fitting directly on wall including necessary connections with 0.75 sqmm ( 24 / 0.20 mm ) PVC copper flexible cable for connecting the tube with the adjecent point.
PaintingPainting of pole with 2 coats of enameled paint or other approved paint. Upto height of 7 metres (Single bracket)
Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work.
Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Heavy gauge welded conduit pipe 20 mm dia 1.60 mm thickness on surface. Make Jindal, Parkash, Ravindra, Tata
Heavy gauge welded conduit pipe 25 mm dia 1.60 mm thickness on surface. Make Jindal, Parkash, Ravindra, Tata
Galvanised iron flexible pipe complete with socket nipples and checknuts etc. at both ends ( upto length of 1 metre.) Size 25 mm dia.
Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. Make AKG, Diplast, Polypack, Ravindra PVC pipe 65 mm dia.
Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .
Extra for using salt and charcoal / coke for pipe earth electrode as required.
Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required .
Supply and erection of under ground cable, loose in existing pipe or trenches complete with necessary connections . Make Havell’s, Polycab, R.R. Kabel, Grandlay 25 Sq. mm 3.5 Core Cable .
16 Sq. mm 4 Core Cable .
Supply and erection of suitable compression type brass cable glands for underground Cable. Make Havell’s, Polycab, R.R. Kabel, Grandlay 10 Sqmm to 16 Sqmm Cable 2 to 4 Core .
25 Sqmm to 50 Sqmm Cable 2 to 4 Core.
Supply and erection of weather proof M.S.Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S.sheet hinged cover, housed in 1:2:4 cement concrete muff including suitable size of PVC pipe for in coming and out going cables, including the cost of 1 no. 16 amp. 415 volts kit-kat and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board in the M.S.Box including the cost of locking arrangement , painting and necessary connections etc. Muff size 40 cm. dia 50 cm .high.
Wiring in existing conduit pipe(Recessed) for electrical points.
wiring only in 1.5 sq.mm PVC insulated copper conductor cable in existing conduit pipe and MS boxes covered with 5 mm thick bakelite sheet including cost of switch, wall socket, ceiling rose etc.Fan Point Medium Point .Long Point .Light point
Short Point
Medium Point .
Long Point .
Twin control light point with 2 way 5 amp. single pole switchShort point.
Long point.
Call bell point Long point
3 pin 5 amp. plug point including earthing the 3rd. pin etc.Short point.
Long point.
3 pin 15 amp. plug point including earthing the 3rd. pin etc. with 4 sq mm PVC insulated copper conductor cable. Long point.
Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. Make Grandlay, Havell’s, Polycab, R.R. KabelCable size 1.5 sq.mm(3/ 0.81 mm)
Cable size 4.0 sq.mm(7/ 0.85 mm)
Cable size 10.0 sq.mm(7/ 1.05 mm)
Supply and erection of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work.Make L&T/ABB/ Havells / Standard12 way TP&N (Horizontal) (8 + 36)
Supply & erection of PVC conduit pipe ISI marked(Medium) recessed in wall/ ceiling etc. including cost of PVC bends, inspection boxe and all other material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work. Make AKG, Diplast, Polypack, Ravindra 20 mm dia
25 mm dia
Supply and erection of 50mm diameter 1.5mtr. Long GI bracket (B-Class) making an angle 10 to 15 degree with horizontal plane for mounting street light fitting on GI bracket on wall with 2 Nos. 50mmx3mm thick MS flat including cost of cutting welding of GI pipe complete with cement sand mixture bolts and nuts etc. including making necessary connection with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-charge of the work.
Supply & erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Delux model No. 50440 ISI / SSK make PC 561 operated on 120/280 V A.C. Supply complete including cutting of existing Bakelite sheet and making necessary connection etc. up to the entire satisfaction of the Engineer-in-Charge of the Work.
Supply & Erection of LED Street light fitting 70W of with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-charge of the work. Make Bajaj / Philips/Crompton/ surya/ Wipro
Supply & Erection of 120 watt flood LED light with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-charge of the work. Make Bajaj / Philips/Crompton/ surya/ Wipro
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .