COMPREHENSIVE REPAIR TO POWER HOUSE, SUB STATIONS AND ALLIED WORK AT MIL STN SRI GANGANAGAR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer - in - Charge.

M&L 450x350 x7 mm thick glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles and incliding 10mm thick backing coat in CM 1:4. complete all as specified and directed by Engineer - in - Charge

M&L Non- skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles and incliding 15mm thick screed in CM 1:6 complete all as specified and directed by Engineer - in - Charge.Make :- Johnson, Orient, Asian, Kajaria

M & L machine cut kota stone slab flooring 18-20mm thick (minimum size 55 cms x 55 cms) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing including 15mm of screed bed in CM 1:6complete all as specified and directed by Engineer - in - Charge.

M & L machine cut kota stone slabs as in vertical surfces such as risers of steps 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing also moulding edges including 10mm of backing coat in CM 1:4complete all as specified and directed by Engineer - in - Charge.

M&L granite (of any type) work 15mm thick (table rubbed and polished) in cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with damixture of pigment to match with shade of granite including 15mm of screed bed in CM 1:6 complete all as specified and directed by Engineer - in - Charge.

Demolition concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed by Engineer - in - Charge.

M&L 75 mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) filling sub base as in floors, sub floor etc complete all as specified and directed by Engineer - in - Charge.

M&L 25mm thick cement concrete flooring type B0, 1:2:4 using 12.5 graded aggregate finished even and fair complete all as specified and directed by Engineer - in - Charge.

M&L for sand filling (25mm thick) under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer - in - Charge.

M&L Machine pressed precast rubber moulded concrete coloured interlocking paver block any shape and size confirming to IS 15468-2006 of 60 mm thickness with grey cement and pigment M-35 Grade 20mm graded stone aggregate) complete all as specified and directed by Engineer - in - Charge.

M & L providing precast cement concrete in PCC (1:2:4) type B-1 with 20mm graded aggregate for kerb stone and similar work with plain fair finishes including chamfers, weathering, throating etc and setting in mortar (1:4) complete all as specified and directed by Engineer - in - Charge.

M & L for 75mm thick cement concrete type C-1, 1:3:6 using 20mm graged aggregate as in plinth protection complete all as specified and directed by Engineer - in - Charge.

M & L 300mm x 300mm x 25mm thick chequred cement concrete tiles set jointed and pointed in neat cement slurry in floors with grey cement and pigments including 20mm of screed bed in CM 1:4 complete all as specified and directed by Engineer - in - Charge.

Demolition of brick work built in cement mortar of any descriptioncomplete all as specified and directed by Engineer - in - Charge.

M&L brickwork withsub class `B' Bricks (old size), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed by Engineer - in - Charge.

Taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer - in - Charge.

M&L 15mm thick rendering in CM 1:6 to brick/ concrete wall surfaces finished even & smooth w/o using extra cementcomplete all as specified and directed by Engineer - in - Charge.

M&L 15mm thick rendering in CM 1:4 to brick/ concrete wall surfaces finished even & smooth w/o using extra cement complete all as specified and directed by Engineer - in - Charge.

M&L, 5mm thick rendering in CM 1:3 on fair faces of concrete surfaces as on ceilings finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.

M&L two coat of acrylic emlusion paint over chalk whiting on newly plastered wall surfaces including preparation of surfaces with putty finishes complete all as specified and directed by Engineer - in - Charge.

M&L two coat of cement base paint over white wash in new surfaces of wallls including preparation of surfaces with putty complete all as specified and directed by Engineer - in - Charge.

M & L for three coats of white to new surfaces of on ceilings including preparation of surface finishes complete all as specified and directed by Engineer - in - Charge.

M&L two coat of cement base paint to old surfaces of walls including preparation of surfaces with putty finishes complete all as specified and directed by Engineer - in - Charge.

M&L two coats of acrylic emulsion paint over old decorated surfaces of wall after complete removal of existing treatment including preparation of surface complete incl chalk whiteing with putty finishes complete all as specified and directed by Engineer - in - Charge.

M&L two coats of white wash to old surfaces on ceilings including preparation of surface complete all as specified and directed by Engineer - in - Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm eachcomplete all as specified and directed by Engineer - in - Charge.

Taking down chowkats or frames (without taking off shutters from the frame) exceeding 1.5 each complete all as specified and directed by Engineer - in - Charge.

Taking down steel window/ventilators complete all as specified and directed by Engineer - in - Charge.

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each and refixing in same opening after resecuring easing etc complete all as specified and directed by Engineer - in - Charge.

M& L pressed steel frame for door size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, look strike plate etc complete all as specified and directed by Engineer - in - Charge.

M&L providing cement concrete (1:3:6) type C1 for filling ing pressed steel frames and other similar items etc complete all as specified and directed by Engineer - in - Charge.

S&F 2nd class hard wood plain solid straigt chowkats and frames, wrought, framed , rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer - in - Charge.

S&F 35mm thick shutter plain, framed, pannelled shutters factory made (any number fo panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium denisity, wood particle board with commercial face veneers : suppllied and fitted to chwokats complete all as specified and directed by Engineer - in - Charge.

S&F second class hard wood glazed and skeleton door, window shuttes 35mm thick open rebated and prepared to recive glass, gauze etc divided into squares with plain, chamfered or rounded mitred and rebated sash bars any number & fitted with cut ad mitred beads for securing glass etc sizes of members of shtters as specified in SSR Part-I, section 8 clause 8.24(a) complete all as specified and directed by Engineer - in - Charge.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC shee reinforeced with M.S. Square tube, suppling & fixing in opeing as per specification an shall be filled with suitable wooden block in all the three legs the frame shall be covered with fiberglass from all sides. M.S. stay shall be provided at the bottom to steady the frame complete all as specified and directed by Engineer - in - Charge.

S&F Factory Made solid PVC moulded door shutter with particle board co 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face supplying & fixing in frame complete all as specified and directed by Engineer - in - Charge.

S&F 100 mm long butt hinges, heavy weight, cold rolled mild steelcomplete all as specified and directed by Engineer - in - Charge.

S&F aluminium handle cast type anodised, 150mm long complete all as specified and directed by Engineer - in - Charge.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed by Engineer - in - Charge.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed by Engineer - in - Charge.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer - in - Charge.

S&F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to windows/ ventilators/ doors complete all as specified and directed by Engineer - in - Charge.

S&F in repairs 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer - in - Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick sorrounds, glazed with oil putty or fixed with beadscomplete all as specified and directed by Engineer - in - Charge.

S&F 4mm sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each plane complete all as specified and directed by Engineer - in - Charge.

S&F steel windows with side hung shutters including hinges with steel handle and steel peg stay, complete with glazing bars, devetailed or weldedcomplete all as specified and directed by Engineer - in - Charge.

M&L two coat of synthetic enamel paint on old painted surfaces of wood and wood based materials over 10 cm width or girth including preparation complete all as specified and directed by Engineer - in - Charge.

M&L two coats of synthetic enamel paint over a coat of pink primer on new surfaces of wooden and wood based material over 10cm width of girth including preparation of surfaces complete all as specified and directed by Engineer - in - Charge.

M&L two coats of synthetic enamel paint on old painted surfaces of steel and iron work over 10cm width or girth including preparation complete all as specified and directed by Engineer - in - Charge.

M&L two coats of synthetic enamel paint over a coat of red oxide on steel surface over 10 cm width or girth, not otherwise described including preparation of new surface complete all as specified and directed by Engineer - in - Charge.

Suuply and fix in repairs vitreous china wash hand basin white flat back of size 550mm X 400mm, fixed with a set of cast iron brackets including cutting and pinning in ends of brackets to wall, provision of 15mm size pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter "Hot or cold'' with long scrwed shanks and fly nuts, 32mm dia brass chromium plated waste fittings 450mm long PVC connection of 15mm size with PTMT nuts and 40mm dia waste pipe complete all as specified and directed by Engineer - in - Charge.

Supply & Fix in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections etc complete all as specified and directed by Engineer - in - Charge.

S&F in repair, 10 ltr capacity low level PVC valveless, syphonic action type flushing cistern(dual system), white, with inlet, ball valve, flush pipe, PVC connection 15 mm dia and 450 mm long float and handle including bracket complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs Angle stop valves, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union andcomplete all as specified and directed by Engineer - in - Charge.

S&F in repairs15mm bib taps cast copper alloy, chromium plated fency type with crutch or butterfly handle screwed down screwed for Iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer - in - Charge.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm long complete all as specified and directed by Engineer - in - Charge.

S&F CP gratings 100mm dia of PTMT fixed in repair (minimum weight 25 gms) complete all as specified and directed by Engineer - in - Charge.

S&F in repairs CP towel rail 600mm long fixed with CP brass screwscomplete all as specified and directed by Engineer - in - Charge.

Taking up or down GI steel water tubing 15mm bore and connections including fittings from floor/walls/ceiling complete all as specified and directed by Engineer - in - Charge.

Taking up or down GI Steel water tubing 20mm bore and connections including fittings from floor/walls/centrings complete all as specified and directed by Engineer - in - Charge.

S & F Galvanised steel water tubing 15 mm bore medium grade with all fittings concealed including cutting chases to brick wall/ceiling or laying in floors and making good complete all as specified and directed by Engineer - in - Charge.

S & F GI steel water tubing 20mm bore medium grade with all fittings and fixed complete to walls ceiling or laid in floors complete all as specified and directed by Engineer - in - Charge.

Dismantling water tanks any type exc. 250 ltr but nexc 500 ltrcomplete all as specified and directed by Engineer - in - Charge.

S & F rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I (500 Ltrs) capacity complete all as specified and directed by Engineer - in - Charge.

Supply and fixing in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for bore dia of pipe 20mm complete all as specified and directed by Engineer - in - Charge.

Taking down existing rolling shutter of any size descriptin including top cover, anchoring rod, hasp & staple complete push pull manual or bevel gear box and crank handle type and refixing the same in the same opening or any other opening complete all as specified and directed by Engineer - in - Charge.

S&F Ball bearing for rolling shutters complete all as specified and directed by Engineer - in - Charge.

M&L Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high complete all as specified and directed by Engineer-in-Charge.

Clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots, and trees not exceeding 30 cm girth (measured one metre above ground level) and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance except in the case of surface dressing which includes for all the foregoing except clearing away of trees all as specified and directed by Engineer-in-Charge

Supplied and laying Graded coarse aggregate nominal size 40mm spreading on floor of E/M installation depth n.exc 15 cm deep complete all as specified and directed by Engineer - in - Charge.

Laying only Graded coarse aggregate any size spreading on floor of E/M installation depth n.exc 15 cm deep complete all as specified and directed by Engineer - in - Charge.

Note :(i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

PAREEK AND COMPANY

AYUSH BUILDERS