PROVN OF SITE OFFICE AND STORAGE ACCN FOR GE (P) COMD HOSP LUCKNOW

Amount

Surface excavation n.exc(not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches , n exc 1.5m wide and n exc 1.5 m in depth;for foundation etc. or for shafts , wellls ,cesspits, manholes, peir holes etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and directed.

Removing excavated material n.exc 50m and deposting where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in old size bricks in cement mortar of 1:6 complete all as specified and directed.

M&L 15 mm thick rendering in CM (1:6 ) on fair faces of brick wall or concrete surfaces finished fair and even complete all as specified and directed.

M&L Earth filling under floor spreading and levelling in layers n exc. 25 cm thick and well ramming including watering as required complete all as specified and directed.

M&L hard core of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, Watered and rammed to a true surface of broken stone or boulders complete all as specified and directed.

M&L 100mm thick cement concrete type B-2 (1:2:4) using 40mm graded stone aggregate as in floor complete all as specified and directed.

M&L Cement concrete in foundation, filling and mass concrete of type B-2 (1:2:4) using 40mm graded stone aggregate complete all as specified and directed.

M&L Cement concrete in foundation, filling and mass concrete of type E-2 (1:5:10) using 40mm graded stone aggregate complete all as specified and directed.

Excavation in post hole (or similar hole) each n exc 0.5 cu.m getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance n.exc. 50 m and making good surface in soft/loose soil complete all as specified and directed.

S&F Plate (plain or chequered) channels, square ,cut or notched (ordinary or counter sunk) forming holes, without any attachment FE-410 W (Gde-E 250) quality -A distance pieces, cleats etc complete all as specified and directed.

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Framed work FE-410 W (Gde-E 250) quality -A as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

Returning , filling in ,including spreading ,levelling, watering and well ramming in layer n exc 25 cm as in soft/loose soil complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for preparation of new steel and iron surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

S& F 12mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required including color etching, double action floor spring heavy duty, SS handle 12", L connector, hole etc with SS fittings complete all as specified and directed.

'S&F Gl frame work for seamless ceiling (size of grid 605 x 605 mm) comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section(not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete including Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw per manufacturers instructions and applying 02 coat of oil bound distemper over 1 mm thick putty including preparation of newly surface complete all as specified and directed.

M&L Granite 18mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed in CM 1:4 complete all as specified and directed.

S&F Rolled mild steel FE-410 W (Gde-E 250) quality -A work as in Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. complete all as specified and directed.

Cutting holes in brick walls built in cement mortar exc half brick but n.exc one brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

S&F powder coated not less than 50 micron Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F powder coated not less than 50 micron Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Cutting openings, through brick walls built in cement motor for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and directed.

M&L Forming jambs, etc. to openings (to foregoing item), including cutting toothing and properly bonding into old work, also facing, jointing and pointing to match existing work in cement mortar (1:4) complete all as specified and directed.

S&F 4.8mm thick sheet glass ordinary quality of glazing with oil putty or wooden beads in square exc 0.5 sqm each panes complete all as specified and directed.

M&L 75mm thick cement concrete type D-2, (1:4:8) using 40mm graded stone aggregate as in sub-floors, sub-base, floor complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35grade with approved colour,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

S&F aluminium composit panel not less than 3 mm thick in any colour alongwith necessary fittings & fixures as per site requirement including fixed over MS framed work complete all as specified and directed. Note:- MS frame work shall be measured and paid separately under relevent item here-in-above.

Supply and fixed stainless steel letters of 8" hight fixed over aluminium composit panel with screwes or adhesive complete all as specified and directed.

Rakesh Traders (BID ID -3395808)

LOKESH CONSTRUCTION (BID ID -3395042)

M/s Bipin Construction (BID ID -3411682)

Shri Siddhi Vinayak Builders (BID ID -3387661)

Khushi Muskan Engineer & Developer (BID ID -3393000)

M/s Bajpai Constructions (BID ID -3395989)

Manoj Electricals (BID ID -3401021)

M/S PERFECT CONSTRUCTION CO. (BID ID -3406338)

M/s Bhadoria Associates (BID ID -3401689)

BAJAJ CONSTRUCTION (BID ID -3398923)

Spectrum Enterprises (BID ID -3401179)

M/S S J CONSTRUCTION (BID ID -3401063)