Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.1 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹39.9 L+₹1.4 L (3.66%)Rejected-Finance 210 C RAM DASS KA HATA SADAR CANTT LUCKNOW UP PIN 226002 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226002 | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹39.9 L+₹1.4 L (3.71%)Rejected-Finance 0 SALEHPUR KOTLA BSR ROAD PO DAHANA HAPUR HAPUR UTTAR PRADESH 245101 | HAPUR | UTTAR PRADESH | 245101 | L3 | Rejected-Finance NOT BEING LOWEST | |
| 4 | L4₹40.6 L+₹2.1 L (5.41%)Rejected-Finance | L4 | Rejected-Finance NOT BEING LOWEST | |
| 5 | L5₹41.2 L+₹2.7 L (6.97%)Rejected-Finance | L5 | Rejected-Finance NOT BEING LOWEST |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
4 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BKT
GE (AF) BKT, LUCKNOW
ADDN/ALTN AND IMPROVEMENT TO HQ COMPLEX AND CEO COMPLEX AT AF STN BKT
2022_MES_522123_1
8609/BKT/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) BKT
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE (AF) BKT
₹70,000
Yes
12 Aug 2022
5 May 2022
6 Jun 2022
5 May 2022
4 Jun 2022
19 May 2022
60 days
Amount
Demolition of brick work or stone/boulder masonary built in cement mortar of any specification and in any position complete all as specified.
M&L for brick work with sub class "B" brick (using old size bricks)straight or curved on plain exc 6m mean radious built in CM 1:4 complete all as specified and directed.
Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc on walls and ceiling completed all as specified and directed
M&L for 15mm thick cement plaster on concrete/brick surfaces in CM 1:4 and surfaces finished even & smooth without using extra cement mixed with WPC complete all specified & directed. (Note- WPC shall be measured & paid separtely)
Supply only integral waterproofing compound
M&L for 15mm thick cement plaster on concrete/brick surfaces in CM 1:6 and surfaces finished even & smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall & applying wall care putty with two coat of Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm) over and including priming coat (exterior primer @ 2.20 kg/10 sqm) in comoflauge pattern complete all as specified and directed
M&L for complete removal of existing treatment from plastered surface of wall and preparation of old plastered surfaces of wall with wall care putty & applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm) over and including priming coat (exterior primer applied @ 2.20 kg/10 sqm) in comoflauge pattern complete all as specified and directed
M&L for complete removal of existing treatment from wall & preparation of plastered old surfaces of walls and applying two coat of oil bound emulsion over a coat of primer alongwith one coat of wall care putty of any approved colour complete all as specified and directed
M&L for preparation of new plastered surfaces of walls and applying two coat of oil bound distemper over & a coat of primer alongwith one coat of wall care putty of any approved colour complete all as specified and directed.
M&L for complete removal of existing treatment of steel/iron surfaces (degalvanised) and applying two coat of synthetic enamel paint on steel surfaces over one coat of red oxide primer in comoflauge pattern Surfaces of any description, over 10cm in width or girth not otherwise described complete all as specified and directed
M&L for two coat of synthetic enamel paint on steel surfaces in comoflauge pattern, surfaces of any description, over 10cm in width or girth complete all as specified and directed
Taking down chowkats or frames (without taking of shutter) exc. 1.5 sqm but not exc 4 sqm each complete all as specified and as directed
Taking down chowkats or frames (without taking of shutter) n.exc. 1.5 sqm each complete all as specified and as directed
Supply and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension (extruded section profile) 42 x 50 mm (tolerance + 1mm) with wall thickness 2.00mm ( + 0.2mm), corners of the door frame jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded and the hinge side vertical the frames re-inforced by galvanised MS tube size 19 x19 mm and 1 mm ( + 0.10mm ) wall thickness and 3 Nos. Stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions complete all as specified and directed
Providing and fixing factory made uPVC white colour operable door made of extruded profile with wall thickness of 2.3mm ( + 0.2mm) door profile with hollow section with maltii chamber, frame 60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware EPDM gasket 1.2 + 0.2mm thick galvanised steel Frame (28 mm x 21.5 mm), sash (31mm x 27mm), T profile, frame will be fixed to the wall with 8mm x 100mm long fastners. Hardware (Casement door handle made of zinc alloyed ( white powder coated) corner striker. Secondary strikers, cylider, door tranmission gear made of mild steel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 5mm thick glazing with slelected qulaity glass. Note :- The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) complete all as specified and directed
Providing and fixing factory made uPVC white colour Sliding window Three track area not exc 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories & complete specified in SSR Part II (Rates) & as directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose)
S&F for aluminium decorated grill for fixing in uPVC window/ventilator (mesh size 50mmx 50mm x 5mm thick) complete all as specified and directed
S&F for 6 mm thick toughened glass in hinged door partition with required film as directed in uPVC frame of door and window complete all as specified and direccted
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
S & F for 0.63mm galvanised, Corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts bent to a curve (of any redius) in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed
S & F plain, galvanised, 0.63mm thick, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed
All as per item No-23 above but except sheeting complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed
Supply fixing Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre inluding hanging wire complete all as specified and directed
S&F Non asbestos fibre cement building boards design (decorated type) 4 mm thick fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling complete all as specified and directed
S&F in repair Non asbestos fibre cement building board design 4 mm thick fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling complete all as specified and directed
Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to rubbish off the premises complete all as specified and directed
M&L for coloured shade vitrified Ceramic tiles 10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed
M&L for coloured vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in wall skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.11 Sqm but n. exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for Glazed ceramic coloured tile of size 450x300mm x 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 10mm thick rendering in CM (1:4) complete all as specified and directed
M&L 18 to 20 mm thick granite ( of any type ) work (table rubbed and polished) in steps, jamb, pillars window cills, cooking platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any position and any description not otherwise specifically provided complete all as specified and directed
S&F TMT bars 10mm dia and over cut to length, bent to shape etc. including cranking and binding with M.S wire not less than 0.9mm dia complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded pointed in any mortar complete all as specified and directed
M&L machine cut kota stone slab flooring 20-25mm thick laid over & including cement screed bed 20mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed
All as per item No-38 above but except kota stone complete all as specified and directed
M&L kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over & including cement screed 10mm thick in CM 1:4 and jointed with grey cement slurry complete all as specified and directed
M&L mirror polishing on old surfaces of marble/granite/kota stone where ever required to give high gloss finish complete all as specified and directed.
M&L Green Marble work 18 to 20mm thick (table rubbed and polished) in flooring steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types complete all as specified and directed
S & F in vitreous China wash basin white (flat back or angle back ) type of size 550mmx400 mm including brackets,brass cromium plated waste fittings and PVC wast pipe including cutting for and pinning in ends of bracket fixed in repairs complete all as specified and directed
S&F soap dish, vitreous china white, approximate size 160x 160x90mm complete all as specified and directed
S & F in repair of CP bib tap long shank pattern with flange/cap cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipes 15mm bore complete all as specified and directed
S & F in repair CP pillar tap cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure fancy type with long shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed
S & F in repair 15 mm bore CP stop cock /angle cock cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes complete all as specified and directed
S&F in repair Brass CP mixer 15 mm bore for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed
S&F for solid PVC wall Lining/wall panelling consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and all as shown on drawing on SSR complete all as specified and directed.
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15 mm dia of pipe complete all as specified and directed
S&F steel water tubes medium grade, galvanised with all fittings 15mm bore fixed complete to concealed in walls and ceiling or laid in floors complete all as speccified and directed
Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed
S&F for 18mm thick PVC board of one side prelaminated or digital finished and other side plain, white colour to make kitchen cabinet shutter/drawer front shutters complete with and including all fittings (stainless steel) as per specifications complete all as specified and directed. Make : Rajshree/Sintex/sunwin/ M/S Kumar Arch Tech Ltd, M/S H2O soultion complete all as specified and directed
S & F for factory made Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid uPVC foam with homogenous finecellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing on SSR (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed
S & F for Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing complete all as specified and directed. .
S&F for aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specified and directed
S&F for aluminium handles cast type anodised of 150mm complete all as specified and directed
S & F for stainless steel 100 mm size butt hinges fixed all as specified and directed.
S&F for door closer hydraulically regulated designation No-3 universal type suitable for door shutter of 851 to 1000mm in width of aluminium body (die cast) weight between 61 to 80 kg in repair complete all as specified and directed
M & L for preparation of newly plastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed
S & F 20 mm thick weather boarding (Eaves board ) , clean sawn , plain II nd class hard wood fixed with nail (30 mm laps) complete all as specified and directed
M&L for preparation of old wooden or wood based surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed..
M&L for preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed..
Taking down copper/aluminium point wiring for (light, fan, socket or power) complete including unserviceable fittings such as switches, ceiling rose, holders, sockets,light fittings etc. and making good the disturbed surfaces on wall/floor etc complete all as specified and directed.
Taking down fans/meter/Geyser/Exhaust fan from existing position and removing the same and deposited to MES store & refix the same in existing position complete all as specified and directed.
Taking down ols and unserviceable sub main wiring any size/type /core incl earth wire complete with batten conduit etc complete all as specified and directed.
Taking down old unserviceable sheet metal enclousure ,switch fuse unit,distribution board any type/way/capacity including fuses MCB's ,insulator RCCB's etc copmlete after removing all connection and making good the disturbed surface complete all as specified and directed.
M & L for point wiring with 1.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, multistrand, 1100 volts grade copper conductor cable single core, drawn through with and including non metallic rigid PVC conduit medium grade concealed in wall, 25mm dia ISI marked and its accessories ,mounting on surface of wall/ceiling /roofs etc with suitable size metal flush boxes and including front cover colour plate & back for mounting piano type switch /socket/fan regulator etc including one run of 1.5 Sqmm FRLS PVC insulated mutistranded copper conductor cable green in colour for continuous earthing and connected to common earth dolly for One light/fan point controlled by one switch SP 5 Amps ,240 V complete all as specified and directed. Note:- Surface Conduit shall be laid in celing portion only. Make of cable : Plaza/havells/polycab.
All as per item No 69 above but one 3/5 pin 5 amps switch socket outlet point on independent board
Ditto all as per the item no 69 herein before but with 2.5 sqmm conductor for 5 pin 15 Amps switch socket outlet.
All as per item No 69 above but one bell/buzzer point controlled by bell push
S&F switch piano, flush type single pole, one way 5 Amps.
S&F switch socket outlet 2 in 1, 5 pin, 5 Amps flush type
S&F switch socket outlet 2 in 1, 5 pin, 15 Amps flush type complete all as specified and directed.
S & F Bell push 5 Amps complete all as specified and directed.
S&F bell, AC, 230 Volt, single pole complete all as specified and directed.
M&Lceiling rose,PVC/polycarbonate, isolated body complete all as specified and directed.
S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and directed.
Supply and fix down rod 2 feet for fixing ceiling fan with accessories complete all as specified and directed.
Supply and fix down rod 4 feet for fixing ceiling fan with accessories complete all as specified and directed.
S&F square recessed / surface/suspended mounting LED ceiling light with extruded aluminium housing and milky diffuser of 36 W 2'X 2' panel complete with LED driver 240 V ,50 Hz,3600 lumen 6500 k complete all as specified and directed. Make :- Philips/Havells/Crompton
Supply and fixing LED security light 45 watt complete with security light bracket (complete with two set of clamp ,nut and bolt) made out of 40 mm medium grade GI pipe bend to shape and with fixing arrangements duly welded (length of pipe should not be less than 1.2 mtrs) and making conection with using 1.5 sqmm PVC insulated multistranded copper conductor two single core cable complete all as specified and directed. Make :- Philips/Havells/Crompton
S&F Submain wiring with two single core PVC insulated FRLS multistrand copper conductor cable of size 6Sq mm drawn into and including non metallic heavy duty rigid concealed PVC conduit of 25 mm size ISI marked (Pressfit or similar brand ) with all fittings / accessories and 04 Sq mm FRLS multistrand copper conductor cable as continuous earth wire complete all as specified and directed. (Note :- for submain wiring: Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the unit rate quoted for this items.)
S&F submain wiring with two run of single core PVC insulated unsheathed multi stranded copper conductor cable of size 10 Sqmm 1100 volts grade and one run of PVC insulated unsheathed solid copper conductor cable of size 6 Sqmm 1100 volts grade as earth continuity conductor drawn through in and including rigid non metallic PVC concealed / surface conduit of suitable size on roof/wall/ceiling including making good the disturbed surfaces of wall etc complete all as specified and directed. (Note : Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the unit rate
S&F sheet metal enclosure, powder coated single pole and neutral with two pin and earth plug and socket (Mettalic) complete with one single pole MCB for 240 volts 20 Amps rating rupturning capacity 10 KA complete fixed as in repairs complete all as specified and directed by Engineer-in-Charge Make- L&T/ABB/Siemens/Legrand
S&F Sheet metal enclosure for distribution board when MCB to be used SPN 8 way 240 volt sheet complete all as specified and directed. Make- L&T / ABB/ Legrand
S&F MCB SPN 32 to 40 Amps 240 volt,50 hz,10 kA breaking capacity :B" curved type complete all as specified and directed. Make- L&T/Siemens/Legrand
S&F MCB single pole, 6 to 32 Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as directed.Make :- Havells / Legrand / GE / Siemens
Earthing complete with galvanised steel earth plate electrode 60cm x 60cmx6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 M beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1, 40 mm thick cover reinforced with 6 mm dia M.S bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work including connections complete all as specified and directed.
M/S PRATAP BUILDERS
M/s A S Associates
M/s R K Associates
M/s Reliable Electromech Systems
Sanjai sales and services
VINAYAKA (INDIA) MULTIFARIOUS SERVICES PVT LTD
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .