construction of additional trout raceways at Trout fish farm Barot Distt Mandi HP SH construction of 3 Nos Trout raceways size 17x2x1.5 mtr

Amount

Excavation in foundation trenches etc in earth work in all kinds of soil , such as pick work, pick jumper work, jumper work , jumper blasting work, chiseling / wedging out rocks including pumping or bailing out water upto all lifts, stacking the excavated soil in all leads from the edge of excavation and then returning the stacked soil in 15 cm (fifteen centimetres) layers when required in to plinth side of foundation etcetra consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-In -Charge, including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge.Any loss to the public and private property during the course of execution and disposal of unserviceable materials shall be absolute responsibility of the contractor which shall have to be duly compensated by the contractor to full extent in all respects in all cases as per direction of the Engineer-in-charge.

Excavation in drains and channels etc. in earth work including dressing of side and bed and disposing of excavated earth upto a lead of 20 metres (twenty metre) and lift upto 1.50 metres (one point fifty metres) disposed earth to be levelled and neatly dressed . Pick jumper work including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge.Any loss to the public and private property during the course of execution and disposal of unserviceable materials shall be absolute responsibility of the contractor which shall have to be duly compensated by the contractor to full extent in all respects in all cases as per direction of the Engineer-in-charge.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partitions & the like i/c attached pillasters buttresses, plinth and string courses & the like as per the direction of the Engineer-in-charge and other incidentals.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors,roofs landing & the like Floors etcetra upto 200mm (two hundred millimetre ) in thickness within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls Under 20 cm (twenty centimetres) wide, including carriage of materials , with in all leads and lifts as directed by the Engineer-in-charge and other incidentals

Providing and laying cement concrete 1:6 :12 (one cement: six sand : twelve graded stone aggregate 40 mm{forty millimetre} nominal size) and curing complete excluding cost of centring and shuttering in Foundation and plinth including carriage of materials , with in all leads and lifts as directed by the Engineer-in-charge and other incidentals.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate 20 mm (twenty millimetre) nominal size) and curing complete excluding the cost of form work in Walls including attached buttresses,pilasters and their caps and bases string courses etcetra Upto all floor level. as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and laying mechanically mixed and vibrated cement concrete 1: 2:4 (one cement isto two sand isto four graded crushed stone aggregate 20 mm (twenty millimetre) nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foudation and plinth as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and laying mechanically mixed and vibrated cement concrete 1: 2:4 (one cement isto two sand isto four graded crushed stone aggregate 20 mm (twenty millimetre) nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in in Suspended Floor roofs, landing and shelves and their support balconies,beams,girders,bressumers and contilever upto floor twolevel as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing tor steel reinforcement for reinforced cement concrete work including straightening, cutting,bending, binding and placing in position complete with cost of binding wire as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing in RCC work smooth finishing of the exposed surface with cement mortar 1:3 (one cemen tisto three sand) including carriage of material with in all leads and lifts and other incidentals in all heights as directed by the Engineer-in-Charge.

Providing and fixing 40 mm (forty millimetre) thick second class Deodar wood wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 140 G. with wire of dia 0.71 mm ( zero point seven one millimetre ) for doors windows and clerestorey windows including carriage of material with in all leads and lifts and other incidentals in all heights as directed by the Engineer-in-Charge.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows Including black enamelled iron butt hinges with necessary screws. 50mm ( fifty millimetre) thick second class Deodar wood including carriage of material with in all leads and lifts and other incidentals in all heights as directed by the Engineer-in-Charge.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint.In single Stanchions composed of rolled steel joists or channels with caps,bases splices,angles brackets etcetra including carriage of material with in all leads and lifts and other incidentals in all heights as directed by the Engineer-in-Charge.

Supply and fixing expended metal to wood or steel members in partitions etc. Weight not exceeding 3 kg(three killogram).per square metre as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Painting two costs (excluding priming cost on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters Enamel paint other than white as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (medium grade) tube fitting and clamps including making good the wall, ceiling and floor 100 mm nominal {one hundred millimetre}bore as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and laying in trenches, galvanised mild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid separately) 40 mm {forty millimetre} as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing brass full way valve with wheel 40mm {forty millimetre} (nominal bore as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

VIKAS RANA GOVT. CONTRACTOR

Anju Devi

Chanderbhan

BIRBAL RAM WALIA

Keshav ram

Ankush Bhardwaj