Widening of road from SBI Corner to RCMA Guest house in HAL Township area Phase-I.

Essential/ Prequalification Criteria

Annual Turnover: Average annual financial turnover during the last 3 years, ending 31.03.2024 should be at least 30% of the approximate estimated amount put to tender. (i.e ₹ In Lakhs)

Turn over (Rs. In Lakhs)

Profit & loss statement duly certified by chartered accountant with UDIN shall be considered for evaluation of turnover for the respective financial Year.

Solvency : The solvency required will be 40% of the approximate estimated amount put to tender. The solvency certificate shall be from a nationalized or scheduled bank and issued within a period of 12 Months from the final date of submission of the tender i.e ₹ In Lakhs

Related Document to be Uploaded to eProcurement Portal.

Not meeting eligible criteria

Experience Experience of having successfully completed similar works(Refer NIT for "Work Details") during last 7 years ending on the previous day of last day of submission of tender should be either of the following: [Latest work experience certificate may be uploaded] a) Three similar completed works each costing not less than the amount equal to 40% of the approx. estimated amount put to tender against each work in the tender notice. (Or) b) Two similar completed works each costing not less than the amount equal to 50% of the approx. estimated amount put to tender against each work in the tender notice. (Or) c) One similar completed work costing not less than the amount equal to 80% of the approx. estimated amount put to tender against each work in the tender notice.

40% (Three Works)

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

GST No Registration Number.

ESIC Registration Number

EPF Registration Number

Earnest Money Deposit (EMD) details in ₹

License: License for execution of Electrical works and other specialized works from the concerned authorities /organizations/bodies.

Documents to be uploaded along with tender

Constitution, legal status along with attested copies of Deeds / Articles and Memorandum of Association, etc., as applicable.

Power of Attorney in case of Pvt. Limited/limited companies

Details of person holding the power of Attorney.

Related Document to be Uploaded in eProcurement Portal. (Original /Attested / Notarized)

Registration with HAL/ Other organization if any.

Copy of PAN card issued by Income tax authority

I.T Returns for past 03 years (Assesment Year)

Related documents to be uploaded in eprocurement portal.

Details of ECS viz.,where payments are to be credited along with the scan copy of Blank Cheque leaf

Blank Cheque leaf to be Uploaded in eProcurement Portal.

ECS Bank details as per Annexure in tender documents , signed and sealed by concerned bank to be Uploaded to eProcurement Portal.

Udertaking Annexure-K

Address for correspondence:

Contact details

Acceptance by party for Scope of work as per BOQ and Tender terms & conditions.

DECLARATION

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions (Page 1 to 175) including price bid do hereby accept all the terms and conditions laid down.

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer.

Specification

Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan ) including getting out and disposal of excavated earth lead upto 50m and for all lift as directed by Engineer-in-charge.

Supplying & stacking at site murrum including transportation and all as directed by Engineer In-charge. (20 % deducation will accounted for payment towards voids and compaction allowncess from the measured quantity of stack)

Laying, spreading & compacting murrum with road roller 8 to 12 tonne for work in embankment under optimum moisture condition to give at least 95% of maximum dry density (Proctor density) as directed by Engineer In-charge.

Filling available excavated earth in shoulder of road in layers not exceeding 20 cm in depth consolidating each deposited layers by ramming and watering lead upto 50 m and for all lift.

Supplying & stacking at site (for W.B.M of 100 mm compacted thickness) stone aggregate of 90 to 45 mm size all as specified and as directed by Engineer In-charge.

Supplying & stacking at site (for W.B.M of 75 mm compacted thickness) stone aggregate of 63 mm to 45 mm size all as specified and as directed by Engineer In-charge.

Laying, spreading and compacting stone aggregate of specified sizes to W.B.M specification in Uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material ( stone dust ) to fill up interstices of course aggregate, watering and compacting to the required density as directed by Engineer In-charge.

Preparation of surface by cleaning with machanical broom removing of all loose dirt and providing and applying tack coat of using bitumen of grade VG-30 @ 0.50 Kg/Sqm before laying of premixed bituminous macdam over the existing asphalted surface using emultion pressure distrubuter as directed by Engineer In-charge.

Providing and laying bituminous macadam 50 to 100 mm average compacted thickness with bituminous of grade VG-30 @ 3.5% (percentage by weight of total mix) prepared in batch type hot mix plant using crushed stone aggregate of specifide grading premixed with bituminous binder, transported to site by tippers laid over a previously prepared surface with paver finiser equiped with electronic sensor to the required grade level and alignment & rolling with smooth wheeled 8 to 10 tonne vibratery and 6 to 8 tonne tendem rollers as per specification to achieve the desired compaction and density, complete as per specification and direction of Engineer In-charge.

Providing and applying tack coat @ 1.00 kg / Sqm on bitumen surface using hot straight run bitumen of grade VG -30 , including heating the bitumen , spraying the bitumen with mechanically operated spray unit fitted on bitumin boiler , cleaning and preapearing the existing road surface all as specified and as directed by Engineer In-charge.

Providing and laying 2 cm premixed carpet surfacing with 1.80 Cum and 0.90 Cum of stone chipping of 13.20 mm size and 11.20 mm size respectively per 100 Sqm and 52 Kg and 56 Kg of paving asphalting hot bitumen grade VG-30 with no solvant per Cum of stone chipping of 13.20 mm and 11.20 mm size respectively, applying a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete as per specification & directed by Engineer In-charge.(Tack coat will be paid in seperate item)

Providing & laying seal coat of premixed fine aggregate (passing through 2.36 mm & retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-30 Bitumen per cum of fine aggregate and 0.60 Cum of fine aggregate per 100 Sqm of road surface including rolling and finishing with 8 to 10 tonne road roller complete all as specified & as directed by Engineer In-charge.

Rupees Forty Six Lakh Seventy Four Thousand Three Hundred Forty Three and Seventy Paise Only

Approximate Basic Amount Put to Tender

Rupees Eight Lakh Forty One Thousand Three Hundred Eighty One and Eighty Six Paise Only

Rupees Fifty Five Lakh Fifteen Thousand Seven Hundred Twenty Five and Fifty Seven Paise Only