Repair/Replacement of Internal wiring, DB, Meter box fittings, fixtures and service cable at zone A of Mil Stn Gaya

Amount

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

Taking down carefully copper/aluminium Sub main wiring of any size from surface/ concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

M & L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLS multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees, bend, elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLS cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps.

(c) One light point controlled by one, two way switch 5 Amps

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

(f) One bell point controlled by one, bell switch 5 Amps

Description all as per item No 4 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amp.

(c) One light point controlled by one, two way switch 5 Amps

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

(f) One bell point controlled by one, bell switch 5 Amps

Description all as per item No 6 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

Description all as per item No. 6 here in before but using 4.0 sq mm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sq mm PVC insulated copper conductor FRLS cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC Point)

S & F switch piano type single pole 5 amp, 230 Volts complete all as specified and directed.

S & F switch piano type single pole 15 amp, 230 Volts complete all as specified and directed.

S & F switch piano type 2 way switch 5 amp, 230 Volts complete all as specified and directed.

S & F switch bell push piano type 5 amp, 230 Volts Complete all as specified and directed.

S & F socket outlet 2-in-1, 5 pin, 5 amp, 230 Volts complete all as specified and directed.

S & F socket outlet 2-in-1, 5 pin, 5/15 amp, 230 Volts complete all as specified and directed.

S & F ceiling rose, surface bakelite with 3 terminals, ISI marked for batten fitting complete all as specified

S & F stepped type electronic fan regulator flush type complete all as specified and directed.

S & F modular switch piano flush type, single pole, one way 5/6 Amp single module complete all as specified.

S & F modular switch piano flush type, single pole, one way 15/16 Amp single module complete all as specified.

S & F modular switch piano flush type, single pole, two way 5/6 Amp single module complete all as specified.

S & F modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S & F bell push modular 6 Amps single module complete all as specified.

S & F lamp holder, PVC / Polycarbonate type with back plate suitable for batten/ slanting fittings complete all as specified and directed.

S & F bell electric ding dong type suitable for operation on 230 volt 50 Hz AC supply complete all as specified and as directed

M & L for sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two runs of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Four runs of 6 sqmm cable, two runs of 6 sqmm cable and one run of PVC conduit will be measured as one unit.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit.

S & F sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F metal clad box suitable for 230 volt 50 Hz AC supply three pin plug with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed

S & F Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp, in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed

S & F Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 10 watts complete all as specified and as directed. Make: Havells Cat No LHDLO6160099 or its equvalent in Philips, Bajaj.

S & F LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make: Bajaj Cat Part No BCLSB 10 NW or its equivallent model in Wipro, Philips, Havells.

S & F energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make : Bajaj Cat No BIBWP 10W LED or its equvalent in Philips, Wipro.

S & F wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make: Bajaj Cat part No BCLAB 20W WH LED P, Wipro Cat part No LL20-281-XXX065-ALI or its equvalent in Philips, Havells.

S & F energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make : Bajaj Cat part No ENXT P 24L WH CR PC SD (Edge plus series) or its equvalent in Philips, Wipro, Havells

S & F in repair single phase direct connection type KWH meter, temper proof, plastic body with LCD display, 230/240V, 5-30 Amp, accuracy class I, 50 Hz, Conf to IS 13779, IP 54, with (parameters to show Date, time, current reading, KW, PF) in existing position including making complete elcetric connections complete all as specifed and directed. Make : Secure/HPL/ L&T Note : Old meter to be deposite in AGE E/M store.

S & F in repair Three phase direct connection type KWH meter, temper proof, plastic body with LCD display, 230/240V per phase, 5-30 Amp, accuracy class I, 50 Hz, Conf to IS 13779, IP 54, with (parameters to show Date, time, current reading, KW, PF) in existing position by providing wooden board first quality of size 250 mm x 300 mm, including making complete elctric connections complete all as specifed and directed. Make : Secure/HPL/ L&T Note : Old meter to be deposite in AGE E/M store.

S & F in replacement LED ceiling light fitting 36 watt of size 2 ft x 2 ft, LED clean room bottom opening luminaire dust free zero maintenance ceiling mounted aluminium frame complete fitting, including LED panel in white, 230 volt energy saving, enviromental friendly, long life, corrosion resistant, impact proof, surface mounting IP-65 luminaire with PC Housing in opal finish suitable for armstrong/grid ceiling complete with all accessories internally prewired and including connecting with twin core twisted flexible wire copper conductor cable of suitable size complete all as specified and directed. Make: Havells/Bajaj/CG

S & F in replacement round recessed mounted LED edge light slim downlighter fixture 12 watt in die cast aluminium housing finsihed premium white powder coating efficacy 100 lm/w with opal diffuser and separate electronic driver complete with all accessories internally prewired and including connected with twin core twisted flexible wire copper conductor cable with suitable size complete all as specified and directed. Make : CG Cat Part No. LSCRM-12W-CDL/ Havells Cat Part No. LHEBADP7IZ1W012 / Philips

Supply & laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated, armoured, heavy duty elecric cable with alluminium conductor, 1100 volt grade cross sectional area 16 Sqmm 4 core.

Supply & laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated, armoured, heavy duty elecric cable with alluminium conductor, 1100 volt grade cross sectional area 25 Sqmm 4 core.

Excavation in trenches not exceeding 1.5 mtrs wide & not exceeding 1.5 mtr in depth in soft or loose soil & getting out complete all as per & directed.

Returning filling including spreading levelling watering & well Ramming in layers not exc 25 cm

Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed.

M & L for laying of HDPE double wall corrugated pipes in trench for UG cable protection conforming to IS-14930 Part-II with IP-67 having outer dia 50 mm and inner dia of 38 mm including necessary fittings such as couplers, bends etc complete all as specified and directed. Make: Rex/ Rudrax Polymers/Finolex

M & L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate for coping around poles, including necessary form work finishing even and smooth without using extra cement all as specified and directed.

M & L for GI tubing 40 mm dia light grade with all fittings laid in trenches/making GI bracket of security lights/ provn for ceiling fan ponit including bending of suitable size/support of UG cable as required at site as directed by Engr-in-Charge.

M & L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed. Note: Compacted/punned thickness shall be measured & paid.

Supplying and laying sub class 'B' bricks (modular) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed.

Supply, installation,commisioning and testing LT feeder pillar box out door type double door and single shutter front open including locking arrangement system made out of MS sheet of 3.15 mm CRCA sheet of size 0.6x0.6x0.3 mtr and double door,canopy,dust proof, bottom cable entry plate and gland for cable size150/120/95/70/50/25/16/10 sqmm 3.5 core suitable MS angle iron 40x40x5 mm with aluminium busbar size 600Amps system mounted on hygroscopic insulators bus bar including suitable nut, Bolt and Washer(16 Nos) & including powder coated paint with and providing necessary foundation/ plateform of the feeder pillar height 1.5 feet from groundwith PCC 1:2:4 type B2 including provision of for incomong and outgoing cable gland, thimbling for old / new cables as per site requirement and proper finshing as per existing surface complete all as specified and directed by Engr- in- Charge. Note: Drawing for LT feeder piller box shall be got approved by GE before fabrication. Make : Power System & Control, Jalandhar / Universal Switchgears / United Engineering Service, Kanpur

S & F in replacement of service wire 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with tape and overall PVC sheathed 10 Sqmm two core nominal cross section complete all as specified and directed.

S & F in replacement of service wire 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with tape and overall PVC sheathed 16 Sqmm two core nominal cross section complete all as specified and directed.

M/S SANJAY KUMAR YADAV