Construction of 2 X 3 X 4 meter span minor Bridge (Box Culvert) and Approach Road in place of the Rampur link Road from Dudahi Batarouli pitch road in Dist Kushinagar.

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202.(Excluding GST)

Excavation of foundation in ordinary soil (Ioam clay or sand) including lift upto 1.50 meter and lead up to 30meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer in charge up to a distance of 30 meters from the foundation trenches.as per S.I. No. 251 (Excluding GST)

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per clause 401. (Excluding GST)

Providing and laying Cement Concrete 1:3:6(1 cement :3sand : 6 stone aggregate 40 mm nominal size) including supply of all materials, labour and T&P etc. required for proper completion of work and curing complete, also including cost of formwork in foundation and floors as per SI no.281(Excluding GST).

RCC Grade M30 Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications Clauses 800, 1205.4 and 1205.5 (Excluding GST)

RCC Grade M35 Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications Clauses 800, 1205.4 and 1205.5 (Excluding GST)

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. Clauses 1000 and 1202.(Excluding GST)

Back Filling Behind Abutment , Wing Wall and Return Wall complete as per drawing and Specification Clause 1204.3.8.(Excluding GST)

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications (Excluding GST)

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification MoRTH Specification 2503 S.No. 15.1Morth Spe. 2504(Excluding GST)

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 with lead upto 1000m as per tech. speci. clause 303.1, .cartage soil up to 3 km distance (Excluding GST)

Brick on edge pavement on patries with bricks laid dry, joints filled with local sand including preparation of base to proper slope and its ramming, spreading a layer of 1 cm. 3/8" depth of local sand over the subgrade & including supply of all materials. As per SI. 763.(Excluding GST)

P/L 1000 MM dia NP-3 Humepipe Culvert .(Excluding GST)

Construction of embankment with approved material deposited at site from road way cutting and excavation from drain & foundation of other structure graded and compacted to meet requirement of table No. 300-2 with a lead upto 0.00 m as per technical specification clause 301.5..cartage soil up to 3 km distance (Excluding GST)

Granular Sub-Base with Coarse Graded Material (Table:- 400- 2) Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per clause 401. .(Excluding GST)

Providing ,Laying ,spreading and compacting stone aggregates of 63-45 mm size to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber ,applying and brooming ,Stone screening,binding materials to fill up theinterstices of coarse aggregate ,watering and compacting to the required density grading 2 as per PWD Specification..(Excluding GST)

Providing ,Laying ,spreading and compacting stone aggregates of 53-22.4 mm size to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber ,applying and brooming ,Stone screening,binding materials to fill up theinterstices of coarse aggregate ,watering and compacting to the required density grading 3 as per PWD Specification..(Excluding GST)

Brick edging on both side of road with S.O.B. bricks on edge laid with mud mortor I/c labour & supply of bricks finished to required templeteand and in proper alignment and also I/c dressing ,ramming excavated soil as directed by Engineer In charge.(Excluding GST)

Providing and applying primer coat with bitumen emulsion (SS-2) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.85 kg/sqm using mechanical means.as per Technical Specification Clause 502.(Excluding GST)

Providing and applying tack coat with emulsion/bitumen (VG-10) using emulsion/bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface treated with primer & cleaned with hydraulic broom as per Technical Specification Clause 503 (Including all taxes required & including Cost of bitumen VG-10) (Excluding GST)

Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or cut-back or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheeled roller 8-10 tonne capacity, finished to required level and grades. to be followed by seal coat of type C as per technical specification clause 508. (Including all taxes required and hire charges of road roller & including Cost of bitumen ) (Excluding GST)

Providing and laying seal coat by manual means with VG-10 Grade Bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 (Including all taxes required and hire charges of road roller & including Cost of bitumen ) (Excluding GST)

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 with lead upto 1000m as per tech. speci. clause 303.1,For Patries(Excluding GST)

Please Enable Macros to View BoQ information