Balance Civil/ Mechanical and allied works of Govt. Degree College Dharmari at Reasi. (Composite)

Amount

E/work in excavation by manual means in trenches in foundation in all kinds of soil.

E/work in excavation in trenches by mechanical means by hydraulic excavator in trenches in all kinds of soil.

Providing and laying cement concrete in 1:5:10 ( 1 cement : 5 coarse sand : 10 aggregate 40 mm nominal size ) excluding the cost of centering and shuttering using Crushed aggregate 40 mm nominal size all work upto floor level V.

Providing and laying cement concrete in 1:4:8 ( 1 cement : 4 coarse sand : 8 aggregate 40 mm nominal size ) excluding the cost of centering and shuttering using crushed aggregate 40 mm nominal size all work upto floor level V.

Providing and laying cement concrete in 1:3:6 ( 1 cement : 3 coarse sand : 06 aggregate 20 mm nominal size ) excluding the cost of centering and shuttering using crushed aggregate 20 mm nominal size all work upto floor level V.

Centering and shuttering including strutting , propping etc and removal of form

Foundation

Walls any thickness

d) suspended floors , roofs , landings , balconies and access platforms.

Providing and laying Reinforced cement concrete work in beams suspended floors roofs upto 15 ° landing balconies shelves chajja lintels etc etc.upto floor five level excluding cost of centring, shuttering, finishing and reinforcement in 1:1.5:3( 1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ).

Reinforcement for R.C.C work including straightening , cutting , bending , placing in position and binding all complete .

Brick work with common burnt clay F.P.S ( non modular ) bricks of class designation 75 in foundation and plinthin cement mortar 1:6 ( 1 cement :6 coarse sand )

Brick work with common burnt clay F.P.S ( non modular ) bricks of class designation 75 in foundation and plinthin cement mortar 1:4( 1 cement :4 coarse sand )

Extra for brickwork in superstructure above plinth level upto floor level V ( by manual means )

Hand packing/Stone packing of Stones behind the walls

Hand packing of stones in wire crates excluding the cost of crates incl. the cost of stones

Consolidation of subgrade with power road roller 8 to 10 tonne capacity incl. making good the undulation etc with earth or quarry

Providing and laying W.B.M with crushed stone aggregate 63to 45 mm size binding material incl. 13.2 mm screening & stone dust etc and consolation with power road roller 8 to 10 tonne capacity

Providing and laying W.B.M with crushed stone aggregate 53to22.4 mm size binding material incl. 11.2 mm screening & stone dust etc and consolation with power road roller 8 to 10 tonne capacity

Berm filling by way of providing and laying watering & compacting in layer 200mm thick 8-10 tonne capacity etc complete Job

Providing & laying 25 mm thick open garded oremix carpet as per specification confirming to clause of MOST for road and bridge work 1995 with hot mix plant .& paver finisher including preparation of surface and laying of tack coats and laying of 6mm thick premix seal coat eyc complete job

Providing and laying 80 mm thick paver Block precast cement concrete tiles over the layer of crusher dust incl. compacting the surface & filling the joint with crusher dust etc complete

Labour for refilling of earth in septic tank and soakage pit

labour for refilling of bricks bats into soakage pit

Supply of stone Boulders

Supply of brick bats

20 mm thick cement plaster 1:6 mix

15 mm thick cement plaster on the rough side of single or half brick wall of mix 1: 6( 1 cement : 6 fine sand )

1: 6( 1 cement : 6 fine sand )

1: 4( 1 cement : 4 fine sand )

6mm cement plaster ceiling of mix 1:3

Provide and applying white cement based puttyof 1 mm thickness over plastered surface to prepare the surface even and smooth complete

Provide and applying white cement based puttyof 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface.

Finishing walls with textured exterior paint of required shade on new work ( 2 or more coats applied @ 3.28 l /10 sqm over and including base coat of water proofing cement paint applied @2.20 kg /10 sqm . Complete job including scaffolding , cost of all materials , leads , lifts and all carraiages complete.

Wall painting with plastic emulsion of approved brand and manufacture to give an even shade . Two or more coats on new work .

Providing and laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) Somany premium kajaria Nitco with water absorption less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades , laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand )including grouting the joints with white cement and matching pigments etc complete , size of tile 60 x 60 cm .

Providing and fixing 1st quality ceramic glazed tiles conforming to IS: 13753 of NITCO , ORIENT ,SOMANY ,KAJARIA ,or equivalent make in all colours , shade except begundy , bottle green ,black of any size as approved by engineer i/c in skirting , risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg / sqm including pointing in white cement mixed with pigment of matching shade complete .

Providing and laying cement concrete flooring 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20mm nominal size of Agg.

Providing & fixing Glass strips in jointsof Terazo/ Cement concrete floor 40mm x 40mm thick.

Providing and fixing white vitreous china pedestal tupe water closet (European type W.C pan) with seat and lid, 10l low level white PVC flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS : 7231 with all fittings and fixtures, complete including cutting and making good the walls and floors wherever reqd. WC pan with ISI marked white solid plastic seat and lid of make Hindware / Parryware / Cera / Jaguar.

Providing and fixing wash basin with C.I / M.S brackets, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever reqd. including 15mm C.P brass pillar taps. While vitreous China wash basin size 630 x 450mm with single 15mm C.P brass pillar taps of make Hindware / Parryware / Cera / Jaguar.

Providing and fixing Wash Basin mixer of approved quality and make, weighing 1.97 kg 15mm nominal bore of make Jaguar / ESSCO / CERA.

Providing & Fixing of Pvc pipes

Providing & fixing of kitchen stainless steel sink

Providing and fixing stainless steel bib cock of approved quality conforming to IS ; 8931, short body type, 15mm nominal bore of make Jaguar / CERA / ESSCO

Providing and fixing towel rail C.P brass complete with brackets fixed to wooden clats with CP brass screws complete 600mm towel rail with total length of 645mm, 78mm wide and effective height of 88mm weighing not less than 190 grms.

Providing and fixing Soap dish Holder C.P brass with brackets and necessary screws complete. 138mm length, breadth 102mm & height 75mm, wt 106 grm

Providing and fixing mirror of superior bevelled glass (of app. Quality) of 5.5 mm thick and of required shape and size, with moulded frame of approved make and shade, or with spacers.

Providing and fixing G.I pipes complete with G.I fittings and clamps including cutting and making good the walls etc. Medium of make JINDAL / Prakash Surya

b) 20mm dia G.I Pipe

c) 25mm dia G.I Pipe

Providing & Fixing glazing in aluminum doors & windows doors etc with EPDM rubber neoprene gasket etc complete with float glass panes 5.50mm wt. not less 13.50kg/sqm

Providing and laying of clay roofing (Kaprah) red tiles chanelly type fixing in mortar 1:3 mix with 10mm thick mortar including scaffolding charges

Providing & fixing ISI marked flush doors shutters confirming to IS 2202 part decorative type core of block board construction with frame of Ist class hard wood and well matched teak wood 3ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked ms pressed bright finished butt hinges etc

Providing wood work in frames of doors and windows etc of Sal wood

Providing /Applying Construction of Expansion joints with Sukandar combi flex system of 200mm ×1mm duly fuced as per manufacturer standard with epoxy etc all complete job

Providing and fixing of 2mm ×200mm aluminum strips to cover the expansion joints in the building which includes cost of 2mm thick plate cutting the strips & drilling holes in plates etc complete job

Providing & laying water proofing treatment in sunken portion of WC bathroom etc by apply cement slurry mixed with water proofing complete job as per specification standard laid down.

Providing and laying integral water proofing treatment including preparation of surface required for treatment of roofs balconies terraces consisting of following operations .(.a) Clean the surface( b) Applying slurry coat.(c) laying of bricks bats complete (d) After two days of curing apply second coat etc all complete (d) Finishing the surface with neat cement etc all complete (e) The whole surface is cured

Providing and fixing of

Flat iron hold fast

Butt hinges

Tower bolts

Doors stoppers

Eye hooks

Handle

Providing & laying of crates in position etc. incl. all lifts & carriage complete job (Size 6×1.2×1.2 with mesh size 100mm)

Carriage of material by mechanical transport

Sand 20km

Stone 20km

Bricks 135 km

Aggregate 50 km

Supply and Installation of Fire extinguishers

Supply and Installation of 4 Kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Discharge time minimum 8 Secs, Controllable discharge mechanism, Range minimum 3 Meters, Applicable on Class A,B,C and electrically started Fire, A Rating-1A, B Rating-13B, Leak Detection Tested, ISI and CE Approved with Manufacturer’s standard Warranty. Approved Makes:- Ceasefire/ Getech/ Minimax/ Winmex/ Firelion/ Safeguard/ Tyco/ Safepro

Supply and Installation of 4.5Kg, Gas Type Fire Extinguisher, Easy Weight Management, Used Unused Mechanism, Wheel Type Discharge, Discharge time minimum 8 Secs, Controllable discharge mechanism, Range minimum 1 Meter, Applicable on Class B,C & electrically started Fire, B Rating 13B, ISI & CE Approved with Manufacturer’s standard Warranty. Approved Makes:- Ceasefire/ Getech/ Minimax/ Winmex/ Firelion/ Safeguard/ Tyco/ Safepro

Supply and Installation of 2 Kg Fire Extinguisher Clean Agent HCFC 123 OR Equivalent , Stored Pressure Type, Pressure Gauge, Discharge time minimum 8 Secs, Controllable discharge mechanism, Range minimum 2 Meters, Applicable on Class A,B,C and electrically started Fire, B Rating-21B, Leak Detection Tested, ISI & CE Approved with Manufacturer’s standard Warranty Approved Makes:- Ceasefire/ Getech/ Minimax/ Winmex/ Firelion/ Safeguard/ Tyco/ Safepro

Supplying a set of GI fire bucket with round bottom as per IS standards. Each set comprising of 4 nos buckets each of 9 ltrs capacity including fixing suitable brackets in the hook for holding buckets painted with red paint & filled with sand in 2 buckets of each set

TECHNICAL SPECIFICATIONS Fire Extinguishers :- (Approved Makes:- Ceasefire/ Getech/ Minimax/ Winmex/ Firelion/ Safeguard/ Tyco/ Safepro ) makes confirming to the following technical specifications :- 1. Dry chemical powder fire extinguishers, stored pressure type, made of high pressure steel cylinder with valve, internal discharge tube, high pressure wire braided discharge hose, pressure gauge and fully charged with controllable discharge mechanism, applicable on class A,B and C Fires, IS and CE approved with manufacturer’s standard warranty. 2. The extinguishers should be operative in the temperature ranging from -10 degree C to +55 Degree C. 3. Should be designed in compliance with latest IS standards with CE certification.

Supply and Installation of LPG Pipeline

Manifold(2 X3)with manifold valve for (6 No of Cyclinders) without cyclinders

Adopter (NRV)xST

Cyclinder Pigtail Flexible

DBC Special

Regulator (2nd Stage)

Main Line valve(Ist Stage),MECV X BSPTM

Main Line valve (2nd Stage)

HP Adopter X NRV

M. S. Pipe0.5"C Class with all fittings like ETS,welded,clamped and painted (ERW/SL)

20mm BSPPF-HP Adopter

Needle Control Valve 3/8"BSPPM X 3/8"BSPTM

Burner Pigtail 3/8"X BSPPF X 3/8"BSPPF

Terminal block

Taps 1/4"BSPTM X Nozzle

Bush 1/8"BSPTM X 1/8"BSPPF

Bunsen Burner(LPG)

FECV X MECV X BN

Rubber Pipe ISI

Coupling

Carriage and Installation charges

Note:- The measureable quantities shall be allowed as per actuals at the time of actual execution of work within the estimated amount.

TECHNICAL SPECIFICATIONS Supply and Installation of LPG Pipeline :- Approved makes:-United/HPC/Star/Sakha/Vanaz/KMD/Jyoti.

Note:- An amount of Rs. 6.70 Lacs on account of department material available at site as well as water proofing work already executed shall be deducted at the time of payment. The details of departmental material available at site amounting to Rs. 3.00 Lacs (Approx.) is as under; 1) Vitrified Floor Tiles 2) Bathroom Floor Tile 3) Bathroom Wall Tile 4) Red Tile Clay roofing 5) PVC Pipes 6) G.I. Pipes

M/S KOUSHAL SHARMA