PROVN OF TOILET BLOCK NEAR BLDG NO.FET-12 INCLUDING CERTAIN MINOR WORKS

Amount

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m deep in soft/loose soil and getting out complete all as specified and directed.

Excavating over areas, not exc 1.5m deep & getting out in soft/loose soil complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers not exc. 15cm thick spread, levelled & rammed including watering complete all as specified and directed.

M&L for broken stone or boulders hard core of gauge not exc 63mm deposited spread and levelled in layers not exc 15cm thick watered and rammed to a true surface complete all as specified and directed.

Removing excavated soil exc. 50m but not exc 100m & depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.

M&L for damp proof course to horizontal or vertical surfaces in cement concrete 1:2:4, type B-0, 40 mm thick, with WPC including necessary formwork complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and directed. .

M&L for PCC 1:3:6, type C-2 (using 20 mm graded aggregate) as in sub base all as specified and directed

M&L for 25 mm thick PCC (1:2:4), type B1 (using 20 mm graded stone aggregates) as in sub base of floor to receive tiles complete all as specified and directed.

M&L for RCC M-25 design mix (using 20mm graded stone aggregates) as in foundation, column footings and plinth beams complete all as specified and directed.

M&L for RCC M-25 design mix (using 20mm graded stone aggregates) as in columns complete all as specified and directed. .

M&L for RCC M-25 design mix (using 20mm graded stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC M-25 design mix (using 20mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. .

M&L for RCC M-25 design mix (using 20mm graded stone aggregates) as in chajjas complete all as specified and directed.

M&L for mild steel "TMT" bars 10mm dia and over in reinforcement, cut to length, bent to shape required including crnaking, bending sprially for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with chips complete all as specified and directed.

M&L for mild steel "TMT" bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed. .

M&L for mild steel "TMT" bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

M&L for form work as use and waste to sides & soffits of plinth beam and sides of footings getting rough finished surfaces of concrete complete all as specified and directed. .

M&L for form work as use and waste to sides of columns getting rough finished surfaces of concrete complete all as specified and directed. .

M&L for formwork as use and waste to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. (fair finished surfaces of concrete flat) complete all as specified and directed.

M&L for formwork as use and waste to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; n exc. 200m thick (Horizontal or sloping fair finished surfaces of concrete flat) complete all as specified and directed.

M&L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. .

M&L for brickwork with subclass `B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 5mm thick on fair faces of concrete surfaces in CM (1:3) in ceiling complete all as specified and directed.

M&L for two coat cement plaster, first coat 10mm thick in CM 1:6 and second coat 5mm thick in CM 1:4 mixed with WPC finished even and smooth without using extra cement complete all as specified and directed Note:-WPC shall be measured and paid seperately under respective item

Supply only integral water proofing compound complete all as specified and directed

M&L for applying three coats of white wash on new wall surface including preparation of surface complete all as specified and directed.

M&L for coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.11 sqm and not exc. 0.18 sqm (400mm x 400 mm joint free (rectified) ) as in floor set & jointed in neat cement slurry and pointed in white /coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for glazed ceramic tiles of size 600mmx300mmx7 mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match laid over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed

S&F GI tubing, medium grade 15mm bore with all fitting & fixed complete to walls & ceilings or laid in floors of complete all as specified and directed

S&F GI tubing, medium grade 20mm bore with all fitting & fixed complete to walls & ceilings or laid in floors of complete all as specified and directed

S&F CP bib tap 15mm bore, cast copper alloy fancy type with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type complete all as specified and directed.

S&F 15mm bore stop cock CP fancy type with butter fly handle, screwed down, high pressure for iron pipes or for unions (weight not less than 400gms) complete all as specified and directed..

S&F stop valve/angle valve 15 mm bore fancy type, CP with long shank & cup (conncealed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F ball PVC valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed..

S&F CP pillar taps 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position, three layered wall construction, 1000 Ltrs capacity complete all as specified and directed.

S&F PVC connection pipe 15 mm dia, 450mm long with PTMT nuts and bolts suitable for cold and hot water coupling nut of brass, heavy duty, complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with adhesive joints fixed to walls with mild steel clamps of suitable size complete all as specified and directed..

S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed..

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with adhesive joints laid in trenches or in floors complete all as specified and directed.

S&F PVC bends any radius 110mm dia provided with access door complete all as specified and directed.

S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia complete all as specified and directed..

M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed..

S&F soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F CP fancy type tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F 125 mm size brass chormium plated shower rose with long body including fixing to steel pipe or union complete all as specified and directed.

S&F vitreous China bowl urinal angle back of size 430mm x 370mm x 340mm white (min.), with grating & union for discharge pipe including waste pipe (excluding flushing cistern, flush pipe ) complete all as specified and directed.

S&F vitreous China wash basin, white, flat back, size 550mmx400mm including 32 mm brass waste coupling, waste pipe and brackets complete all as specified and directed.

S&F vitreous China squatting pan, 'Orissa' pattern, size 580mmx440mm white, with integral foot rests incl flush pipe, provn of lime concrete bedding complete all as specified and directed.

S&F PVC valveless, syphonic action type, flushing cistern (dual 5/10ltr capacity), low level, white, with intel, ball valve, float , handle and flush pipe 32mm bore,and brackets complete all as specified and directed.

M&L for reinforced concrete pipes 150mm bore ,class NP2 ,laid and jointed complete with socket and spigot joint and sealed complete all as specified and directed.

M&L for concrete bed of PCC 1:3:6, type C2 (using 40mm graded stone aggregates) for NP2 150mm bore, bedding and hanching completely after pipes are laid, jointed and tested complete all as specified and directed.

M&L for cutting chases, pinning in, in brick/ stone wall making good to facings where required and pointing in cement mortar 1:3 or PCC 1:2:4 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring insert sheet in wall. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.

S&F factory made Solid PVC prelam Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet single side prelam PVC sheet wood grain printed used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 4mm thick moulded PVC sheet prelam on the front face & 4mm prelam PVC sheet on back face, supplying & fixing in frame centre core will be PVC battern complete all as specified and directed.

S&F mild steel door shutter with MS angle iron shutters frame 35 mm X 35 mm X 5 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia 300 mm long with locking arrangement, 2 Nos of tower bolt of 200 mm longincluding MS angle iron frame 40mm x40mmx 5mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm and 100 mm size 4 Nos butt hinges including necessary cutting, welding, binding as required with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and as directed. [Single shutters of approx width0.8 to 1.2 m and ht 1.9 to 2.10 M.]

M&L for applying two coats of synthetic enamal paint over a coat of red oxide primer on steel surfaces over 10cm width or girth incl preparation of new surfaces complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section, length of bolt in 150mm complete all as specified and directed.

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed.

S&F butt hinges of 100 mm size, medium weight, stainless steel and fixed complete all as specified and directed.,

S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frusted glass and half portion will be fixed with louvers with 4mm thick frusted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }

M&L for precast reinforced cement concrete 1:2:4, type B1, (using 20 mm graded stone aggregates) set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed..

M&L for PCC in surface channels and drains 1:2:4, type B1 (using 20 mm graded stone aggregates) complete all as specified and directed..

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregates) laid in panels incl finished even and smooth with using extra cement as in plinth protection incl necessary form work to edges and filling of joints with bituminous sealing compound complete all as specified and directed. .

M&L for machine pressed precast cement concrete coloured chemically treated interlocking paver block any shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment etc over and incl 40 mm thick uniformly levelled surface of stone dust cushioning including PCC 1:2:4 type B-0 as in coping all around of size 150mmx100mm thick complete all as specified and directed.

M&L for cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregates) as in coping ,benching in man holes or similar work complete all as specified and directed.

M&L for applying three coats of white wash on new ceiling surface including preparation of surface complete all as specified and directed..

M&L for provn of water proffing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm comprising with following items and all as specified as under:-

(a) The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed. (b) M&L for rendering 10mm thick in cement mortar 1:4 mixed with and including water proofing compound @ 3% by weight of cement applied over roof slab complete all as specified and directed. Note:-WPC shall be measured and paid separately (c) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated. (d ) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm (e) Laying of water proofing teratment of weight not less than 3 Kg / sqm APP modified polymeric water proofing membrane composed of 100 micron (+10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc. (f) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane (g) Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed at site .

S&F vitreous Chinaware EWC pedastal type closet with white seat & cover with flat bottom with hinging device complete all as specified and directed.

S&F chromium plated bib taps two ways cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore and fixed complete all as specified and directed.

S&F chromium plated plated brass health faucet suitable for EWC including CP chord and brass nozzle and fixed to pipe complete all as specified and directed.

S&F chromium plated brass toilet paper holder fixed to wall with brass screws complete all specified and directed.

S&F glass shelf assembly 60 cm long, 5mm thick glass , CP guard and fixed to wooden plug with CP screws and cup washer complete all specified and directed.

M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FR insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement with all fittings such as tees, bends, elbows, etc. of external dia 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and directed :-

For one light, fan point controlled by one switch

For 5Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board

All as per Srl item No.78 here in before but for power point wiring using with 2.5 sqmm PVC-FR insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed.

S&F modular switch, one way, 6 Amp 230, 1 module complete all as specified and directed

S&F socket modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed

S&F switch modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed

S&F socket modular 6/16 Amp, 2/3 pin combined, 2 module 230 Volt complete all as specified and directed

S&F ceiling rose, surface backlit,three terminal complete all as specified and directed

S&F modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed

S&F testing and commissioning of MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

All as per Srl item No.86 above but SPN 40 Amps, 240 V

S&F sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar of suitable size complete all as specified and directed

M&L LED TL fitting 20/18 watt for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness complete all as specified and directed. Make:- Havells Cat Part No LHEXBLP7PN1W020, 4 feet/Bajaj cat part No BCLSB 20 WH/ CG Cat par No LCTC-18-CDL

S&F LED Bulk head fitting 13/10 watt designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed. Make:- Havells cat part No LHEXCGP7UN5W013/BAJAJ cat part No BIBWP10WLED /CG cat part No LBH-10-CDL.

S&F electric water heater (Geyser) ISI marked 25 Ltrs capacity AC 230V, 5 star rating branded heavy duty automatic cutoff and including electric connection lead of suitable size and length and all accessories, grouting of nut bolt/fastner on wall and making good disturbed surface complete all as specified and directed. Make:- Racold(Andris-R)/ Havells cat part No GHWAMJSWH025/Bajaj(Calenta)

S&F exhaust fans AC single phase 230/240 V of size 300 mm sweep metallic body with all accessories including making hole in stone /brick wall grouting & making good in all aspects complete all as specified and directed. Make:-Bajaj frehee 300/CG Trans Air 12"/Havells Ventil Air-DS

Supply and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 16 sqmm, 2 core complete all as specified and directed

Excavation in trenches n. exc 1.5 mtr wide and not exc 1.5 mtr depth for laying of cable as the case may be and getting out in any type of soil complete all as specified and directed.

M&L for sand cushioning in trenches for the cable complete all as specified and directed

M&L for kiln burnt sub class 'B' bricks laid in trenches for cable protection complete all as specified and directed

S&F in replacement of GI pipe light grade 40 mm dia ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers) complete all as specified and directed

M&L for earthing complete with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25m deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs.

S&F ceiling fan 1200 mm sweep metallic white colour with BEE rated, single phase connected with suitable wire complete all as specified and directed.

S&F GI tubing of 25 mm bore, medium grade, ISI marked with all GI fittings (medium grade) incl laid in trenches, floor, etc., complete all as specified and directed .

Excavation in trenches in hard/dense of soil not exceeding1.5 meter wide and not exceeding 1.5 metre wide and not exceeding 1.5m in depth and getting out complete all s specified and directed..

S&F Gun metal Gate valve iron wheel head both end screwed of size 25 mm bore for iron pipe complete all s specified and directed..

Cutting existing GI tubing for alterations ,screwing existing tube of any bore for new connection including earth work and clamp, neccessory fitting as per site required complete all s specified and directed..

Supply and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 6 sqmm 2 core complete as specified and directed.

S&F air termination single pointed copper rod 12 mm dia 300mm long complete all as specified and directed

S&F test point terminal block made of gun metal or phosphorus bronze fixed on wall with PVC junction box complete all as specified and directed

S&F earth continuity conductor or main earthing lead fixed to wall & roof top in grid connection with air termination rod of size 25X3mm aluminium strip complete all as specified and directed

S&F earthing continuityconductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25X4mm galvanised iron or steel wire complete all as specified and directed

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 Mtr below ground level) with top edge of earth plate not less than 1.5 Mtr below ground level connected to galvanized iron strip 25x4mm by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber) 1:2:4 type B-1 using 20mm graded stone aggregate copy shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4 funnel wiht wire gauge of 22 gauge (0.68mm) 8 mesh per liner inch, 50 mm thick cover of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with 8 mm four MS bars @ 80mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No 5 of MES SSR Part-I (1991) and specified including provision of earth wire protected by 15mm dia medium grade pipe and watering pipe shall be 20mm bore medium grade, all excavation and earth work & connectiing the earthing to an earthing test point as specified and testing on completion complete all as specified & directed

S&F GI pipe 25mm dia medium grade confirming to ISI marked all fittings supports of air termination in grid lighting conductor, including suitable clamps, nuts & bolts complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregates) for coping of pole using extra cement for smooth finish incl form work complete all as specified and directed

M&L for grouting of fasterns of suitable size 8 mm dia, 150 mm long by drilling wall and making good to the disturbed surface and matching with existing surface complete all as specified and directed.

Supply, installation , testing and commossioning of solar hot water system (Evacuated tube collector) with and including back up electric supply, stainless steel hot water tank duly instaled with inlet & outlet , based on indirected transfer of heat of capacity 500 LPD complete all as specified and directed

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position, three layered wall construction, 500 Ltrs capacity complete all as specified and directed.

Supply, fixing, testing of hot water pipe medium grade duly insulated with glass wool & aluminium cladding 15mm bore complete all as specified and directed

M&L for screwing existing steel tubing for altration or additions or lengthening screw on pipe to form conectors of any size GI tubing complete all as specified and directed

M&L for frame work as in staging/stand for water storage tank complete all as specified and directed

Supply, Laying, joining and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 25 sqmm 3.5 core laid in trenches, ducts, pipes, etc complete all as specified and directed

M&L for sheet metal enclosure made out of 3.15mm CRCA sheet powder coated weather proof wall mounting type front opening shutter with proper locking arrangements suitable for wall mounting totally enclosed complete with fixing arrangements with nuts, bolts or grounting including neccessary PCC work as required on site comprising of the following:- Incoming: (a) MCCB TPN 63 Amps, 415 Volts, 10KA - 01 Nos (b) Copper bus bar four strip of rating 100 Amps for minimum 3 out going -01 Set (c ) Space and provn of dinrail for 06 Nos MCB SPN (d) Indicator lamps (RYB)-01 Set Out going: (a) S&F MCB SPN 20 Amps 240 volts, 10KA - 05 Nos

M&L for submain wiring in replacement with 2 run of single core 4 sqmm PVC insulated copper conductor multi stranded wire along with 4 sqmm PVC insulated single core multi stranded copper conductor as earth wire in and including suitable size heavy duty PVC conduit complete all as specified and directed

siddhant construction