PERIODICAL SERVICES INCLUDING EXTERNAL WHITEWASH/COLOUR WASH, CEMENT BASE PAINT AND OBD AT CERTAIN BLDGS AT N-1 AREA, KULDEEP, POWER HOUSE AND NAIR AREA AT AFS CHAKERI KANPUR

Amount

M & L for preparation of old decorated surfaces of walls, pillars and cornices including brooming down and cleaning the surfaces and applying one coat of white wash complete all as specified and directed.

Ditto all as per item No. 1.00 above but on ceiling.

M & L for complete removal of existing treatment of old internal / external wall/ceiling/chajja surfaces by means of scraping machine including filling the cracks, removing the nails, vegetations etc. and applying water proof cement based wall care putty(undiluted) @1-2 Kg per Sqm for obtaining smooth surfaces having average thickness 1 mm of approved make over the plastered/old painted surfaces as per manufacturer's instructions complete all as specified and directed. Note : Putty work will be carried out as per following steps :- (i) Mix the putty powder by adding 40-50 % water and mix it with Trucare putty mixture with minimum capacity 1400 W power having mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute. (ii) Apply the first coat with the parepared mixer with the help of fully automatic airless spray machine of putty application of Asian Trecare Graco Spray Machine (Model : EH 230 DI) or equivalent having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minute with a maximum pressure 230 bar having maximum tip size 0.041" (iii) Allow 6-8 hrs to dry the putty surface.

M & L for applying two coats of acrylic emulsion distemper over a coat of primer with using airless technology with max working pressure 3300 PSI and capable of operational single spray gun with a maximum material hose length 30.0 m. The spray shouled be of reputed make as approved by GE and accessories for applying the exterior emulsion and should be able to spray in hand to reach areas and achieve the good wounding and penetration of paint on the surface to achieve excellent application using limited manpower complete all as specified and directed.

M & L applying two coats of acrylic emulsion exterior grade weather proof paint over a coat of weather resistant acrylic primer on prepared surface of wall in one operation of each coat-wise and after application of first coat of paint surface shall be got approved by GE in token of their satisfactory application and thereafter subsequent coat shall be applied complete all as specified and directed.

M & L for preparation of surface and applying one coat exterior water based primer with airless spray technology with maximum working pressure of 3300 PSI and capable of operating single spray gun with a maximum material hose length of 30.0 m. The spray should be of reputed make as approved by GE complete all as specified and directed.

M & L for applying two coats of exterior weather proof, anti- algae 100%, acrylic smooth emulsion with silicon additives that offers anti-algae high peroformance exterior wall finish with eight years of peroformance warranty by manufacturer and applied by using air less techonology with maximum working pressure of 3300 PSI and capable of operating single spray gun with a maximum material hose length 30.0 m. The spary should be of reputed make as approved by GE and specified by paint supplier with accessories for applying the exterior emulsion and should be able to spary in hard to reach areas and achive the good wounding and penetration of paints on the surface to achive excellent application using limited manpower complete all as specified and directed.

M & L for prepation of old decorated plastered or un-plastered surfaces of wall, pillasters, cornices etc. by brooming down or by steel wire brushing, scrapping down smoke, roots, moulds, moss and efflorescence, salt and trading oil and greasy spot and applying one coat of cement base paint complete all as specified and directed.

M & L for preparation of old painted wooden / wood based surface of any description exceeding 10 cm width or girth by washing down with solution of alkaline soap to remove all loose dust/dirt and oily / grease spots and applying one coat of synthetic enamel paint complete all as specified and directed.

Ditto all as per item No. 9.00 above but on steel surfaces.

Taking down cement plaster on brick or concrete surfaces, parapets etc including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15 mm thick in CM ( 1:6 ) on the brick / concrete surfaces of wall, finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick in CM ( 1:4 ) on the brick / concrete surfaces of wall, finished even and smooth without using extra cement with mixing water proofing compound @ 3% by weight of cement complete all as specified and directed. (Note : Water proofing compound shall be measured and paid separately under relevant item).

M & L for 10 mm thick plastering in CM (1:4) on the ceiling surface finished even and smooth without using extra cement and applying three coats of white wash after preparation of new surface complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M & L for preparation of new plastered or surface of wall, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke, roots,moulds ,moss and efforehance, salt and trading oil and greasy spot and applying two coats of cement base paint over one coat cement base primer complete all as specified and directed.

M & L for re-writing letters or figures (Block roman italic or Indian ) using synthetic enamel paint of colour as approved not exceeding 30 cm height complete all as specified and directed.

M & L for cleaning of roof by getting out growing vegetations / grass & brooming down with removing it beyond the premises of MD land including repairing to damaged surface of roof by using CM (1:3) mixed with WPC @ 3% by weight of cement and sealed with 85/25 grade hot blown bitumen in patch not exceeding 2.0 Sqm each complete all as specified and directed.

M & L for repairing of damaged portion of mouth at tarrace / roof surface of rain water pipe by cleaning and repairing to mouth of RWP by using CM (1:3) including liquid WPC & sealed with 85/25 hot blown grade bitumen complete to make joint of rain water pipe and roof suface fully leak proof complete all as specified and directed.

M & L for repair to chajja area not exceeding 1.0 sqm each by using plaster in CM (1:3) or PCC (1:2:4) type B0 using 12.5 mm graded stone aggregate on top including mixing WPC as per manufacturers instruction, benching / haunching and repair to broken plaster with dubbing coat complete all as specified and directed.

M & L for repair to chajja area exceeding 2.0 Sqm but not exceeding 4.0 sqm each including dismentling of upward facia, cutting of reinforcement and applying plaster in CM (1:3) or by using PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate on top including mixing WPC as per manufacturers instruction, benching / haunching and repair to broken plaster with dubbing coat complete all as specified and directed.

M & L for repair to chajja area exceeding 1.0 Sqm but not exceeding 2.0 sqm each including dismentling of upward facia, cutting of reinforcement and applying plaster in CM (1:3) or by using PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate on top including mixing WPC as per manufacturers instruction, benching / haunching and repair to broken plaster with dubbing coat complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Providing and applying high quality acrylic modified resion based texture of Dholpur / Red sand stone pattern with anti-algae and UV resistance properties to be applied as intermeditate finish as in desiered pattern @ 43.04 Kg /10 sqm to form film of 1-1.5 mm thickness after scrapping and properly cleaning the surface to remove all loose particles from the plastered surfaces followed by top coating with premium acrylic smooth extrior paint with silicon additives of required shade by two or more coats @ 1.43 Ltrs / 10 Sqm complete all as specified and directed.

M/S KUSHWAHA BROTHERS

JEEWAN BUILDERS ENGINEERS

pk enterprises

P.N. BROTHER