Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.7 LAccepted-AOC 10 MAKHAN LAL SADHUKHAN LANE PO PS BARRACKPORE KOLKATA 700120 W B | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700120 | L1 | Accepted-AOC AOC PLACED ON L1 BIDDER WITH CONTRACT AGREEMENT NO GE/SHL/59 OF 2022-23 | |
| 2 | L2₹44.3 L+₹85,532 (1.97%)Rejected-Finance | L2 | Rejected-Finance REJECTED BEING L2 BIDDER | |
| 3 | L3₹45.0 L+₹1.6 L (3.73%)Rejected-Finance C O EROS PALA EAST LABAN ROAD SHILLONG 793004 | EAST KHASI HILLS | MEGHALAYA | 793004 | L3 | Rejected-Finance REJECTED BEING L3 BIDDER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
21 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SHILLONG
GE SHILLONG SHILLONG DIVISION PIN 793002
PROVN OF STORE ROOM AT OFFICE COMPLEX AND PROVN OF 02 X GATES OF OFFICE COMPLEX AND PROVN OF 02 X 2000 LTR WATER STORAGE TANKS ALONGWITH STAGING AND SPL REPAIR TO JCO/OR MD ACCN BLDG NO DM 10/1 DM 10/2 DM 10/3 AND DM 10/4 OF NCC DTE SHILLONG UNDER GE
2022_MES_560199_2
GE/SHL/TOKEN-55 OF 2022-2023
Open Tender
Civil Works
Item Rate
270 days
GE SHILLONG
ALL AS PER TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
Yes
GE SHILLONG
₹90,000
Yes
17 Feb 2023
7 Nov 2022
22 Nov 2022
7 Nov 2022
21 Nov 2022
7 Nov 2022
Amount
Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth and getting out in soft/loose soil, all as specified .
M & L PCC 1:4:8 type D2 (using 40 mm graded aggregate) as in Foundation filling and mass concrete complete all as specifed and as directed.
M&L for Reinforced cement concrete (nominal mix) 1:1.5:3 type A1 (20mm graded aggregate) in foundation including rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs, and mass concrete etc , all as specified.
M&L for Reinforced cement concrete (nominal mix) 1:1.5:3 type A1 (20mm graded aggregate) in columns, pillars, piers, post and struts , all as specified.
M&L for Reinforced cement concrete (nominal mix) 1:1.5:3 type A1 (20mm graded aggregate) in beams, cantilevers, lintels over 1.5 m span etc., all as specified.
M&L for Use and waste of formwormk to side of concrete foundation, footings, bases of columns, rafts and raft beams, side and soffit of foundation and plinth beams flat, for rough finished surfaces of concrete , all as specified.
M&L for Use and waste of formwork to sides of pillars, columns and stanchions, square or rectangular, for rough finished surfaces of concrete , all as specified.
M&L for Use and waste of formwork to sides and soffit of floor and roof beams, beam haunchings, girders, shelves etc flat for rough finished surfaces of concrete , all as specified.
M&L for TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding mild or securing with clips as specified.
M&L mild steel TMT 6mm to 8mm dia as in stirrups cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding mild or securing with clips as specified.
M&L for precast cement concrete block masonry with solid blocks exc 10 cm in width with PCC (1:3:6), type C-1, (using 20mm graded stone aggregate) and setting in CM(1:6) complete all as specified and directed.
M&L Rendering 15mm thick in two coats on fair finish of concrete surface of wall in CM (1:4) and finished the surface fair & even without using extra cement , complete all as specified and as directed
M&L Rendering 10mm thick on concrete surface of wall in CM (1:6) and finished the surface fair & even without using extra cement , complete all as specified and as directed
M & L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specifed and as directed.
M&L for PCC 1:3:6 type C-2(using 20 mm graded cr. stone aggr),75mm thick as in plinth protection finished even and smooth without using extra cement layed in bays not exc. 2.00m complete all as specified.
M & L for PCC 1:2:4 type B1 (Using 20 mm graded aggr) as in coping and similar works incl necessary form work all as specified.
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including distance pieces, cleats, plates, welding/rivets/bolts etc complete all as specified.
S&F plates 6mm thick (plain or chequered ) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment of Fe -410-W( Gde-E-250 quality-A)complete all as specified and as directed.
M&L for preparation of new or previously untreated surface of steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified.
S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet as in ridge of 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M&L for 4mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws as in ceiling complete, complete all as specified and directed.
S&F aluminium snap grid frame work for false ceiling incl 6mm dia GI hanger (upto 1200mm length) adjusting level fixed to roof slab/truss/purlins/rafters @ 12.m C/C complete all as specified and as directed.
Spreading and levelling in layers n exc.25cm thick , well ramming including watering as required, all as specified.
M&L for 100mm thick cement concrete type D2, 1:4:8 (40mm graded aggregate) as in sub base for floors all as specified.
M&L for 25 mm thick cement concrete 1:2:4, Type B-0 (12.5mm graded aggregate) as in floor for tiles all as specified.
M&L for Machine cut kota stone slab flooring 18-20mm thick over and incl 20mm thick cement screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.
M&L for kota stone floor 18-20 mm thick, as in skirting,set and jointed in neat cement slurry and pointed in white or coloured cement to match Complete all as specified.
M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work in steel grating drain cover all as specified.
S&F for 2nd class hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed.
S&F for 35mm thick, factory made, 2nd class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as spd.
S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 100mm complete all as specifed and as directed.
S&F Aluminium alloy, anodised sliding door bolts(250mm long) with hasp,staples( bolt type) and fixing clip of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified.
S&F Aluminium handle 150 mm long cast type anodised, complete all as specified.
S&F Aluminium tower bolt (200 mm long), anodised barrel tower bolts of extruded section complete all as specified.
S&F for 35mm thick, factory made, 2nd class hard wood, glazed and skeleton shutter open rebated and prepared to receive glass,gauze etc. without sash bars edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc complete all as specified.
S&F for 30mm thick, factory made, 2nd class hard wood, glazed and skeleton shutter open rebated and prepared to receive glass,gauze etc. without sash bars edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc complete all as specified.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as in aluminium ventilators,complete all as specified.
S&F Aluminium floor door stopper (150 mm long) of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified.
S&F M.S. rat tail helical door spring (150 mm long) including roller and roller plate complete all as specified.
S&F Sheet glass, ordinary quality 4.00 mm thk and glazing with oil putty in square not exceeding 0.5 sq m in each pane complete all as spd.
S&F figured sheet glass , ordinary quality 4.00 mm thick and glazing with oil putty in square not exceeding 0.5 sq m in each pane complete all as spd.
M&L for preparation of new or previously untreated surface of wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.
M & L for preparation of new plaster surfaces of walls including cornices, pilasters etc and applying two coats of weather coat over a coat of primer complete all as specified and directed.
M & L prepration for newly plastered surfaces and applying two coats of distemper over a coat of primer complete all as specified and directed.
Returning, filling incl spreading levelling watering and well ramming in layers n exc 25 cm thick each layer complete all as specifed and as directed.
Removing of excavated soil to a distance exc 250m but n exc 500m and deposited where directed n exc 1.5 m above the starting point complete all as specifed and as directed.
S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc, complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete in Fe-290 (Gde E-165) all as specified.
M&L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as spd.
Surface Excavation n exc 30cm deep and average 15 cm deep getting out in soft/loose soil complete all as specified.
M&L PCC, (1:2:4) Type B-0, (12.5mm graded aggregate) 40mm thick as in floor finished even and smooth using extra cement complete all as specifed and as directed.
S & F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe-290 (Gde E-165) complete all as specified.
S&F Rotational moulded polye- thylene water storage tanks of capacity 2000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position including all necessary connections all as specified in SSR Part I, complete all as specified
S&F G.I. pipe 32mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors complete all as specified
S&F G.I. pipe 20mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors complete all as specified
S&F G.I. pipe 15mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors complete all as specified
S&F 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed, complete all as specified
S&F Gun metal gate valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, suitable for following bore of pipe including taking down old existing unserviceable gate valve of dia 20 mm complete all as specified and directed by Engr-in-Charge
S&F 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified
S&F 20mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete.
Dismantling of floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specifed and as directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) and area n exc 1.5 sqm each all as specified.
Taking down chowkats but with shutters (without taking off shutters from frames) exc 1.5 Sqm but n exc 4 Sqm each complete all as specifed and as directed.
Demolition of concrete of any description in any position not otherwise specifically provided for complete all as specifed and as directed.
Demolition and breaking up drain pipes 150mmdia (salt glaged stone ware AC or reinforced concrete pipe set in cm) complete all as specifed and as directed.
S&L ,2nd class soft wood plain soild, straight chowkats and frames, wrought, framed rebated on thesolid, rounded or chamfered, put togeather with glue pinned at joints complete all as specifed and as directed.
M&L for Non Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6). complete all as specified and directed.
M&L for Non Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6). complete all as specified and directed.
M&L for Glazed ceramic colour tiles in vertical surface of size 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the tile colour including Screed bed or bedding layer of mortar 10 mm thick for vertical faces in CM (1:4) complete as specified and directed
S&F 30 mm thick 2nd class hard wood flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed
S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm complete all as specifed and as directed.
M&L for 18/19 mm thick Prelaminated particle board,interior grade, prelaminated both sides with decorative choice laminations including taking down old one completed all as specified and directed.
M&L for Tower bolt, brass, of size 75mm complete all as specifed and as directed.
M&L for Bow Handle, brass, of size 100mm complete all as specifed and as directed.
S&F Aluminium alloy, anodised, sliding door bolt with hasp staple (bolt type) 300mm size and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specifed and as directed.
S&F Extruded Aluminium, anodised, bow handles of size 150mm complete all as specifed and as directed.
S&F Continuous (Piano) hinges, brass, width of flaps 30 mm (when open) complete all as specifed and as directed.
S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in all as specified and as directed
S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 75mm complete all as specifed and as directed.
S&F Vitreous china wash down water closet pan padestal pattern white, excluding fixing bolts, flushing cistern but including flush pipe, seat and cover complete all as specified and as directed.
S & F Vitreous china squatting pan of pattern 'long pan' size 580 mm white with 'P' or 'S' trap front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) complete all as specifed and as directed.
S&F PVC valveless, 10 ltrs, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified.
S&F PVC (SWR) 110mm bore bends any radius complete all as specifed and as directed.
S&F PVC (SWR) 75mm bore bends any radius complete all as specifed and as directed.
S&F PVC (SWR) 110mm bore bends any radius with access door complete all as specifed and as directed.
S&F PVC (SWR) 75mm bore bends any radius with access door complete all as specifed and as directed.
S&F PVC (SWR) 75mm bore vent cowl complete all as specifed and as directed.
Demolition of Brickwork or stone/boulder masonry or precast concrete block walling, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework built in cement mortar complete all as specified.
Supply and fixing rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 500 ltrs in position incl float valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed including taking down old UNSV tank all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed togeather with solvent cement, fixing in the frame at site as per specification & drawing.
M&L for Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforcement with M.S square tube, supplying & fixing in openings as per specification complete all as specifed and as directed.
M&L for Cutting chases,pining in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing steps, cills, sunshades ,shelves,lintels,etc.; and cutting chases for concealed water tubing or concealed conduit,wiring,etc,and making good cutting not exceeding 10 cm girth in brick walls. complete all as spd
S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified
S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified
S&F in repair Concealed stop cock, Chromium plated, 15 mm, all as specified and directed
S&F PVC connections 15 mm size with PTMT nuts of length 450mm.
S&F in repair Bib taps, cast copper alloy fancy type , screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F Grating doom 100 mm dia of PTMT.(Minimum weight 25 gms) complete all as specifed and as directed.
M & L for PCC 1:3:6 C2 (40 mm graded aggregate) as in surface channels and drains all as specified & directed.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms,moulds,mitred/ stop ends
M & L for complete removal of existing treatment of walls including cornices, pilasters etc and applying two coats of distemper oil emulsion over a coat of 1 mm thick wall care putty and one coat of wall primer and complete all as specified and directed.
M&L for for applying two or more coats (over 1 mm thick plaster of paris wall care putty) of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surface on external surfaces including complete removal of existing treatment over wall and preparation of surfaces even and smooth complete all as specified and directed.
M&L for preparation of old wooden surfaces of any description over 10cm in width or girth and treated with one coats of synthetic enamel paint complete all as specified and directed.
Taking up or down steel tubing and connections of 15mm/bore complete all as specified and as directed.
All as per item No 105 above but 20mm or bore of pipe complete all as specified and as directed.
Taking down plastering on lathing (other than wire-netting, without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered) complete all as specifed and as directed.
M&L for Rendering 15mm thick on fair faces of concrete surface of wall in CM (1:4) in two layers with Top 5mm thick mixing with WPC @ 3 % by weight of cement over a backing coat of 10mm finished even and smooth without using extra cement all as specified and directed Note : WPC shall be measured and paid seperately as supply only.
M&L for 15mm rendering in cement mortar (1:6) on brick/concrete surfaces finished the surface even and smooth without using extra cement.
M & L for preparation of new walls surface and applying two coats of distemper oil emulsion over a coat of 1 mm thick wall care putty and one coat of wall primer and complete all as specified and directed.
M&L for for applying two or more coats (over 1 mm thick plaster of paris wall care putty) of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surface on new or previously untreated surfaces all as specified and directed.
Supply only Integral water proofing compound complete all as specified and as directed.
M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specifed and as directed.
Dismantling wall and ceilling bords of any description including cover fillets complete all as specifed and as directed.
Dismantling asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof covering complete all as specifed and as directed.
Dismantling boarding any description fixed in any position with nails complete all as specified and directed
S&F 2nd class HW boarding 20mm thick fixed with nails in eaves board plained one side with butt joint complete all as directed.
Dismantling of timber scantling 40 sqcm over in section in any position (unframed work) complete all as specifed and as directed.
M&L 2nd class hard wood in scantling clean sawn timber fixed all as specified.
Dismantling wrought Iron or mild steel work of any description not other wise described complete all as specified and directed.
M&L for Mild steel joist channel or angle or tee section,ms tube and fixed with ms flat iron cut into shape drilled and fixed with screw conforming fe 410 complete all as specifed and as directed.
M&L for chequered cement concrete tiles 20cm x 20cm x 25mm / 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with gray cement and pigment in floors over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes incl bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915x460 mm bowl size 410mmx360mmx160 mm complete all as specifed and as directed.
S&F (20mm curtain rail) harrison rails, aluminium anodised alloy, with fixing brackets, stops, rollars etc 20mm dia complete all as specified and as directed
S& F of brackets decorative (Latto) for 20 mm dia curtain rails complete all as specifed and as directed.
S&F Vitreous china wash hand, white , flat back of size 550mm x 400 mm including bracket, cutting for and pinning the ends of brackets or etecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450 mm length with PTMT nuts, complete all as specified and as directed by Engr -in- Charge.
AGE E/M SCHEDUEL PART - II Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . PVC Conduit confirming to IS 9537 part I & III Note (All chases will be cut by chase cutter only) AMke of Cable - KEI/ Havells / Kalinga
Description all as per Srl item No.127 above but for socket outlet point 5 Amp on same board.
Description all as per Srl item No.127 above but for socket outlet point 5 Amp on Independent board.
Description all as per serial item No 127 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.
Supply and fixing modular switch 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor, Vinay
Supply and fixing modular switch 1 way 16 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor .
Supply and fixing modular sockets 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed.
Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. ake : Cona , Plaza, Anchor, Vinay
Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make : Cona , Plaza, Anchor .
Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete pre wired fixed to wall with 2 nos PVC block of suitable size complete all spcifided and directed.
S & F Exhaust fan 230 volts , 300mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and making good disturbed surface of wall and outer wooden box for fan fix on wall complete all as specifed and as directed.Make Bajaj/Havell's/CG.
Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.
Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed
Supply and fix MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's complete all as specifed and as directed.
M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.
Supply and fixing LED security Building light LED 25 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete all as specifed and as directed. Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDL equivalent model as in Surya / havells .
Supply and fixing Post top 45 watt for gate and landscape lighting with IP 65 Protection n to impact and corrosion, anti glare and uniform distribution complete all as specified and directed by Engr-in-Charge Make- Crompton cat no LPTOI-45-T /Havells / Phlips
S & F Exhaust fan 230 volts , 300mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and making good disturbed surface of wall and outer wooden box for fan fix on wall complete all as specifed and as directed.Make Bajaj/Havell's/CG.
Removing excavated material/ surplus soil and depositing where directed at a distence not exceeding 50mtr.at a level not exceeding 1.5 mtr from starting point complete all as specifed and as directed.
Supply lay/spread in trenches , river sand ,clean ,including spreading ,levelling ,punning for laying /cushioning of cables all as specified and as directed.
Supply lay in trenches fly ash bricks, old size sub class “B” designation for cable protection complete all as specifed and as directed.
Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc , of size 10 Sq.mm 2 core , confirming to IS specifications complete all as specifed and as directed.
Supply and fix on pole / wall or lay in trenches under road / drain crossings etc., for drawing cables, 40mm bore GI pipe light grade , , ISI marked ,of following sizes including necessery pipe , fittings ,clamps, bolts , nuts etc complete all as specifed and as directed..
Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.
Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified.
Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, in PVC Casing capping on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately .
Description all as per Srl item No 152 above but for one bell point controled by one bell push .
Description all as per Srl item No 152 above but for socket outlet point 5 Amp on same board.
Description all as per Srl item No 152 above but for socket outlet point 5 Amp on Independent board.
Description all as per serial item No 152 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.
Supply and fix switch piano (ISI marked) Single pole 240 volts, 5Amps all as specified and directed. Make- Havells/anchor/ Legrand.
Supply and fix bell Push (ISI marked) Single pole 240 volts, 5Amps all as specified and directed. Make- Havells/anchor/ Legrand.
Supply and fix socket (ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed. Make- Havells/anchor/ Legrand.
Supply and fix switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and directed. Make- Havells/anchor/ Legrand.
Supply and fix in repairs ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make : Cona , Plaza, Anchor .
Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. Make- Havells/anchor/ Legrand.
Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one complete all as specifed and as directed.
S & F wall mounted LED batten fittings with all accessories 1X 9 Watt LED / foot light 6000K , extruded polycarbonate, integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size complete all as specified and as directed including taking down old unserviceable light fittings
S & F Wall bracket decorative LEDwith lamp 12 Watt complete with necessary connection including taking down old unserviceable one complete all as specifed and as directed.
Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric and water connection and testing after installation. Make : Havells cat part no - GHWCAMTWH025 : /LG/Ronald.
S&F heat resistant PVC connection pipe for hot and cold water 450mm long 15mm dia. Make: Prayag or equivalent in Polytuf/ Havells/ Sona.
S&F bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.
S&F angle stop valve cast copper alloy, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixing of size 15mm.
S & F Exhaust fan 230 volts , 250mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall including taking down old one complete all as specifed and as directed. Make Bajaj/Havell's/CG.
Supply and fixing LED security Building light LED 25 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light including taking down old one complete all as specifed and as directed Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDL equivalent model as in Surya / havells .
Supply and fixing single phase digital electronic meters with LCD Display 5-60 Amps Cat Part No WM101BC5DL0 Make :- L&T including taking down old unserviceable meters to store and including connection and complete all as specified and directed as specified.
Supply and fix in repairs MCCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. . (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . Note : Copper thimble shall be used for connection of cable .
Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down old one complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.
Supply and fix MCCB TPN, 240 Volts, 40 to 63 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed including taking down old one.
Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one. Make: Havells Cat part No - DHMCCDPF006-032 or equivalent in Schnieder/GE/C&S.
Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's.Make : Hager as per cat part- NCN106N, Schneider as per cat No : A9N4P32C or Indoasian as per cat No : 81195.
M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.
M & L Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Cassing capping ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC casing/capping it shall be measured as one RM.
Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc , of size 16 Sq.mm 4 core , confirming to IS specifications complete all as specifed and as directed
MS HO Shadap
S K Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .