GE/863/EWS-T-59 OF 2023-24

Amount

Dismantling floor hearth and wall tiles including cement mortar bedding (but not backing) and removing from site, complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level), complete all as specified and directed by Engr-in-Charge.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm gradded stone aggreggate as in levelling course of flooring, complete all as specified and directed by Engr-in-Charge.

M&L for Vitrified tiles Light shade of 10mm thick (square/Rectangular), polished area of each tiles n.exc 0.36 Sqm as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed by Engr-in-Charge.

All as per Item No. 04 above, but as in skirting/dados over and including 10mm thick rendering in CM 1:3, complete all as specified and directed by Engr-in-Charge.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1:4) complete all specified and directed.

M&L for glazed clolour ceramic tiles of size 300x450x6-7 mm thick as in dado/skirting including / laid over rendering in 10mm thick back coat in CM 1:3 etc. set and jointed in neat cement slurry and pointed in coloured cement with pigment, complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick PCC (1:4:8) type D2 (using 40mm gradded stone aggreggate) as in sub base of path, complete all as specified and directed by Engr-in-Charge.

M&L for laying plain cement concrete type C-1 (1:3:6) (using 20mm graded stone aggregates) as in plinth protections, 50 mm thick , finished even and smooth without using extra cement , with joints 10 mm wide and in full depth at corners and @ 3.0 metre centre to centre, filled with mastic mortar, complete all as specified and directed by Engr-in-Charge.

M&L for coloured Chequered cement concrete tiles 30cmx 30cmx25 mm / 20cm x20cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors including / laid on 15 mm thick in CM (1:4) screed bed or bedding layer with grey cement and pigment, complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats with shutters (without taking off shutters from the frame), area not exceeding 1.5 Sqm each, complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats with shutters (without taking off shutters from the frame), area exceeding 1.5 Sqm but not exceeding 4 Sqm each, complete all as specified and directed by Engr-in-Charge.

Taking down of shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each, complete all as specified and directed by Engr-in-Charge.

S&F 1.25 mm thick pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and directed by Engr-in-Charge.

S&F 1.25 mm thick pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and directed by Engr-in-Charge.

M&L for providing cement concrete type C-0 1:3:6 (12.5 mm graded agg) as for pressed steel chowkhats, complete all as specified and directed by Engr-in-Charge.

S&F 35mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed by Engr-in-Charge.

S&F 2nd class hard wood 35 mm thick plain, framed, panelled shutters (any no of panels) with panels of timber flat on both sides (feather edge) or of veneered partical boaed medium density, wood pertical board with commercial face veneers; supply and fix to chowkat, complete all as specified and directed by Engr-in-Charge.

S&F 2nd class hard wood 35 mm thick Glazed and sketon shutters, open rebeated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SS Part-I, section 8, clause 8.24 (a) supplied and fitted to chowkat, complete all as specified and directed by Engr-in-Charge.

S&F solid PVC door frame of size 50 mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, in opening as per specification & drawing, complete all as specified and directed by Engr-in-Charge.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail on either side and as gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to this stiles and rails with suitable PVC sheet beading and joined together with solvent cement, S&F in the frame at site as per specification and drawing all as specified in SSR Part-II 2020 section 8, complete all as specified and directed by Engr-in-Charge.

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and directed by Engr-in-Charge.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m incl. necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each doors, hinges, anodiesed aluminium snap beading screw etc., complete all as specified and directed by Engr-in-Charge.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.), complete all as specified and directed by Engr-in-Charge.

S&F Mortice brass lock vertical type size 100mm with 4 levers, complete all as specified and directed by Engr-in-Charge.

S&F in repairs Mortice brass lock vertical type size 100mm with 4 levers, complete all as specified and directed by Engr-in-Charge.

S&F aluminum (extuded section) body door closer hydraulically regulated designation No 3 universal type, suitable fo door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg., complete all as specified and directed by Engr-in-Charge.

S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete glazing bars dovetailed or welded, complete all as specified and directed by Engr-in-Charge.

S&F 100mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed by Engr-in-Charge.

S&F in repair 100mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed by Engr-in-Charge.

S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed by Engr-in-Charge.

S&F 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws, complete all as specified and directed by Engr-in-Charge.

S&F 150 mm Aluminium handles, cast type, anodised, complete all as specified and directed by Engr-in-Charge.

S&F 140mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, complete all as specified and directed by Engr-in-Charge.

S&F mild steel 300mm ordinary rat tail rod pattern springs including roller, roller plate, complete all as specified and directed by Engr-in-Charge.

S&F in repairs mild steel 300mm ordinary rat tail rod pattern springs including roller, roller plate, complete all as specified and directed by Engr-in-Charge.

S&F galvanised mild steel wire cloth 0.5 mm nominal dia of wire and average width of aperture 1.4 mm, complete all as specified and directed by Engr-in-Charge.

S&F in repairs galvanised mild steel wire cloth 0.5 mm nominal dia of wire and average width of aperture 1.4 mm, complete all as specified and directed by Engr-in-Charge.

M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engr-in-Charge.

M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass (any thickness size quality or description) from Wdn or steel frames glazed with putty or fixed with beads, complete all as specified and directed by Engr-in-Charge.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares area not exceeding 0.5 Sqm in each pane, complete all as specified and directed by Engr-in-Charge.

S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in squares area not exceeding 0.5 Sqm in each pane, complete all as specified and directed by Engr-in-Charge.

S&F 4 mm thick Aluminium composite Panel for door including necessary joining cleats, glazing clips, ruber neoprene packing, anodised aluminum snap beading screws etc., complete all as specified and directed by Engr-in-Charge.

Taking up or down 15 mm bore GI tubing and connection including cleaning for refixing or removal, complete all as specified and directed by Engr-in-Charge.

Taking up or down 20 mm bore GI tubing and connection including cleaning for refixing or removal, complete all as specified and directed by Engr-in-Charge.

Refixing old steel tubing and connection 15 mm bore in wall, ceiling and floor etc. using GI pipe retrieved from Srl Item No.45 here-in-before, complete all as specified and directed by Engr-in-Charge.

Refixing old steel tubing and connection 20 mm bore in wall, ceiling and floor etc. using GI pipe retrieved from Srl Item No.46 here-in-before, complete all as specified and directed by Engr-in-Charge.

S&F 15mm bore medium grade GI steel tubing including all fittings and fixed complete to wall ,ceiling and laid in floor etc., complete all as specified and directed by Engr-in-Charge.

S&F 20mm bore medium grade GI steel tubing including all fittings and fixed complete to wall ,ceiling and laid in floor etc., complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm dia stop cock of cast copper alloy but fancy type chromium plated screwed down high presser with crutch or butter fly handle on both ends for iron pipe or for union fixed, complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm bore bib taps, cast copper alloy, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms), complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed by Engr-in-Charge.

S&F in replacement brass CP mixer tap 15 mm bore, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered 'Hot or cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white with trap (excluding flushing cistern and flush pipe) including connection to drain and to flushing pipe etc, including plastic water closet seat black closed pattern with flat bottom cover, CP jet spray and mild steel chromium plated hinging device incl all joints, complete all as specified and directed by Engr-in-Charge.

S & F in repairs Chromium plated health faucet (hand spray) with 1mtr long PVC flexiable pipe 15mm bore and fixed to in position etc., complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs, first quality , water closet (squatt pattern) including foot rest, vitreous china (white) ,first quality water closet, Orissa pattern size 580x440mm with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet, complete including fixing of flush pipe with seat and making good the disturbed floor surfaces with the provision of lime concrete bedding to match with existing and making connections serviceable, complete all as specified and directed by Engr-in-Charge.

Supply only 10 ltr capacity PVC valve less symphonic action type flushing cistern, white ,with inlet ball valve, float and handle including bracket and 32 mm dia HDPE flush pipe and connected to squat pattern /pedestal pattern water closet (Flush shall be fixed at suitable height for smooth functioning ), complete all as specified and directed by Engr-in-Charge.

S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern, white ,with inlet ball valve, float and handle including bracket and 32 mm dia HDPE flush pipe and connected to squat pattern /pedestal pattern water closet (Flush shall be fixed at suitable height for smooth functioning ), complete all as specified and directed by Engr-in-Charge.

S&F in repairs sinks with drainage board made of stainless steel of 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl 40 mm PVC waste pipe (Minimum weight 32mm45gms/40mm-60 gms)&40mm PTMT coupling, complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC connection 15mm bore with PTMT nuts and 450mm long, complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china wash hand basin, white flat back size 550x400mm complete including necessary cutting for and pinning in ends of brackets ) including brackets, one pillar tap, 750mm long PVC waste pipe 32mm bore & waste coupling 32mm dia of PTMT (half or full threaded), complete all as specified and directed.

S&F in repairs 19/20 mm dia curtain rails mild steel chromium plated with fixing brackets, stops, roller etc., complete all as specified and directed by Engr-in-Charge.

Dismantling water tanks and removing to store exc 250 and n.exc 500 ltrs, complete all as specified and directed by Engr-in-Charge.

Dismantling water tanks and removing to store exc 500 but n. exc 1000 ltrs, complete all as specified and directed by Engr-in-Charge.

S & F 500 ltr capcity rotational moulded polyethylne tripple layer water storage tanks(cylindrical vertical with closed top) duly provided with necessay fittings/fixtures for connecting inlet, outlet, washout and overflow pipes, noisted incl ball brass valve, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule 20 mm bore and fixed in position, complete all as specified and directed by Engr-in-Charge.

All as per item No 67 above but 1000ltr capacity, complete all as specified and directed by Engr-in-Charge.

S&F 2000 Ltrs capacity, rotational moulded polyethylene tripple layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I, including 20mm ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20 mm bore steel tube and including dismantling existing water tank and removing, complete all as specified and directed by Engr-in-Charge.

S&F in repairs ball brass valves, high pressure, with polythene float and fly nut complete screwed for 25mm bore pipe, complete all as specified and directed by Engr-in-Charge.

S&F in repairs ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore pipe, complete all as specified and directed by Engr-in-Charge.

S&F in repairs ball brass valves, high pressure, with polythene float and fly nut complete screwed for 15mm bore pipe, complete all as specified and directed by Engr-in-Charge.

Taking down cement plastering at any description on brick or stone wall etc. including raking out joints hacking for key scrubbing down with water etc. and removal of debries and depositing where directed, complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering in CM (1:4) on external surfaces of brick work or concrete surface finished fair and even, complete all as specified and directed by Engr-in-Charge.

M&L for 10mm thick rendering in CM (1:6) on internal surfaces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat of cement primer, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over 1 mm thick wall care putty on walls, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plastered surface of walls and applying one coat of white wash, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plastered surface of walls and applying one coat of cement base paint, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plastered surface of walls one coat of old bound distemper, complete all as specified and directed by Engr-in-Charge.

M&L for 1 mm thick wall care on platered/unplastered surfaces, complete all as specified and directed by Engr-in-Charge.

M & L in repair 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber/aluminurm frame work, complete all as specified and directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting (Roof covering) of any description or any gauge or thickness, complete all as specified and directed by Engr-in-Charge.

Dismantling wall and ceiling boards of any description or any thickness including cover fillets, complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engr-in-Charge.

S&F rolled mild steel Fe -290(Gde E-165) for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., complete all as specified and directed by Engr-in-Charge.

S&F Mild steel work as in compound girders and stanchions, latticegirders, aerial masts, staging for water tanks and like including caps bases, splices etc. built up from two or more beam or channel sections or angles with plates or pipe section including all lattice bars, stiffeners, gusset plates etc. (Fe-410-W(Gde E-250)Quality-A), complete all as specified and directed by Engr-in-Charge.

S & F Steel work in tubular trusses, vertical posts, purlins etc including special shaped washer etc., complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, complete all as specified and directed by Engr-in-Charge.

S&F mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, complete all as specified and directed by Engr-in-Charge.

S &F Galvanised, corrugated mild steel sheeting, 0.63 mm thick, with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in roofs etc. with grade of zinc coating 150, complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering with self tapping screws, complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering with self tapping screws as in ridge, complete all as specified and directed by Engr-in-Charge.

S &F Plain, galvanised, mild steel sheeting, 0.80 mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 150, complete all as specified and directed by Engr-in-Charge.

Dismantling plain or corrugated fibre glass reinforced (Roof covering) of any description or any gauge or thickness, complete all as specified and directed by Engr-in-Charge.

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with srew, complete all as specified and directed by Engr-in-Charge.

S&F 2mm thick fibre glass reinforced translucent plain sheeting lap fixed with srew, complete all as specified and directed by Engr-in-Charge.

S&F powder coated GI snap grid of size 605 X 605mm frame work for false ceiling including hangers 2mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long where ever required or tie on structural steel, complete all as specified and directed by Engr-in-Charge.

S&F Exposed metal frame ceiling with 8mm thick decorative laminated calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mmX600mm grid (frame work for ceiling shall be measured and paid seprately), complete all as specified and directed by Engr-in-Charge.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification, complete all as specified and directed by Engr-in-Charge.

S&F Solid PVC Wall Lining consisting of 5mm thick Wood Grain printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications, complete all as specified and directed by Engr-in-Charge.

S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors after dismantling old one, complete all as specified and directed by Engr-in-Charge.

S&F in repairs 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors after dismantling old one, complete all as specified and directed by Engr-in-Charge.

S&F in repairs 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed by Engr-in-Charge.

S& F in repair for 110mm PVC (SWR) bends, complete all as specified and directed by Engr-in-Charge.

S& F in repair for 110mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed by Engr-in-Charge.

S& F in repair 110mm PVC (SWR) vent cowl, complete all as specified and directed by Engr-in-Charge.

S& F in repair 75mm /110mm PVC (SWR) reducer, complete all as specified and directed by Engr-in-Charge.

S& F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, complete all as specified and directed by Engr-in-Charge.

S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed by Engr-in-Charge.

Schedule of Credit

M/S SHIV NATH ENTERPRISES

M/S Shamsher Negi Dewa

R B TRADERS