INTEGRATED COMPREHENSIVE REPAIR / MAINT ALONGWITH WELCOME MAINT OF OFFICERS MD ACCN FOR AREA UNDER AGE B/R-I AT GE(N) AHMEDNAGAR

Amount

Taking down cement plaster on brick or concrete surfaces on wall/ceilling/stone/block etc including racking out joint, hacking for key, scrubbing down with water etc all as specified and as directed.

Demolition of brick work or stone/ boulder masonry/PCC block, built in cement mortar or cement lime mortar including all quoins, pillars etc., all as specified and as directed.

M&L for Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, all as specified and as directed.

M&L for Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded granite stone aggregate) in copings, kneelers, including weathering, slightly rounded or chamfered angles and throating including necessary form work, all as specified and as directed.

M&L for special treatment to sunken portion with 10mm thick plaster in CM 1:4 with WPC liquid conplast x 421 IC of FOSROC or equivalent and applying one coat Each of Nittoproof 120 of FOSROC or equivalent on plastered surface rendering again 10mm thick in CM 1:4 mixed with complast - 421 filling the sunken floor with PCC 1:5:10 using brick bat area of floor upto 3.00 Sqm including 40 mm dia 0.60 m pipe etc complete all as specified and directed by Engineer-in-Charge. Note : Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 , finished even and smooth without using extra cement, all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:6 over brick surfaces, finished even and smooth without using extra cement all as specified and as directed.

M&L for rendering 5 mm thick in CM 1:3 on ceillng, finished even and smooth all as specified and as directed.

M&L for applying two coats of OBD over a coat of primer on newly plastered wall surfaces over 2 coat of wall care putty preparation of surfaces all as specified and as directed.

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash., all as specified and as directed.

M&L for preparing new plastered surfaces and applying Two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls. all as specified and as directed.

Supply only integral water proofing compound.

M&L for preparing old surfaces of walls by brooming down or by steel wire brushing and applying one coat of white wash including scafolding at any height complete all as specified and directed by Enggineer-in-charge.

M&L for preparing old surfaces of ceilings by brooming down or by steel wire brushing and applying one coat of white wash including scafolding at any height complete all as specified and directed by Enggineer-in-charge.

M&L for preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of walls including scafolding at any height complete all as specified and directed by Enggineer-in-charge.

M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint including scafolding at any height complete all as specified and directed by Enggineer-in-charge..

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) including scafolding at any height complete all as specified and directed by Enggineer-in-charge..

M&L for complete removal of existing treatment and prepartion of surfaces including filling the cracks if any on surfaces of walls and applying two coat of acrylic distemper over a coat of primer over a coat of putty including scafolding at any height complete all as specified and directed by Enggineer-in-charge.

M&L for preparing old painted surfaces by washing, rubbing down and stopping of painted surfaces and applying a coat of cement base paint on surfaces of walls including scafolding at any height complete all as specified and directed by Enggineer-in-charge.

M&L for repair to cracks including cutting of V groove along cracks removing all dust and loosely laid particles using a blower wetting the crack using water and filling the crack using crack seal compound paste as per manufactures instructions and finishing using putty blade complete all as spd and as directed at any height including necessary scaffolding. Make : Fosroc renderoc CS / Sika cracksil/ Pidilite Dr fixit 217 crack x shrinkfree

Demolition of Cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including floor finishes, all as specified and as directed.

Demolition floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removal of debries to a distance not exceeding 100m all as specified and as directed.

S&F light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6, all as specified and as directed.

S&F light shade vitrified ceramic tiles 8 to 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in vertical surfaces such as skitings, dado set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed.

S&F Non-skid Coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) size of each tiles 400x400 mm in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6, all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350*250*7 /450x350x7mm to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in backing of skirting and dado including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed.

M&L for machine cut kota stone flooring 18-20 mm thick over Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc as directed by Engineer-In-Charge.

M&L for machine cut kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors aprons etc., all as specified and as directed.

M&L for machine cut cudappah stone 18-20 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for Rounding to edges of stone slabs one edge ,such as in steps cooking platform and other similar situations, all as specified and as directed.

M&L for 18 to 20mm thick granite (of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like in cement (1:4) including pointing in wihte cement (1:2) using marble dust with admixture of pigment ot match with shade of granite., all as specified and as directed.

M&L for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base all as directed.

M&L for rough dressed shahabad stone, 25 mm to 40 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), laid and jointed and pointed in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge.

Providing and laying rubber moulded glossy finish 60 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

M&L for 75 mm thick cement concrete type C-2, 1:3:6 (Using 20 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and as directed.

Taking down of chowkat with shutter without taking off shutters from the frame exceeding 1.5sqm each but not exceeding 4 sqm all as specified and as directed.

Taking down of shutters of any description not exceeding 1 sqm each all as specified and as directed.

Taking down of chowkat with shutter without taking off shutters from the frame, not exceeding 1.5sqm each all as specified and as directed.

Taking down of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each all as specified and as directed.

M&L for re-fixining same opening of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each all as specified and as directed.

Re-securing or easing & adjusting, without taking down shutters of any description not exceeding 1 Sqm each. all as specified and as directed.

Re-securing or easing & adjusting, without taking down shutters of any description exce 1.Sqm and not exceeding 2 Sqm each.

S&F IInd class hard wood plain solid, straight ,chowkats and frame, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints all as specified and as directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board coare supplying & fixing in frame at site as per specification & drawing on sl. page no. 181 of SSR part II 2020

S&F Aluminium framed windows any pattern, fixed/side hung/silding ( three track) using powder coated alluminium sections, of approved make with or with out sash bars suitable for 4mm thick glazing including necessary jointed cleats, glazing all as specified and including Powder Coating (minimum thickness of 50 micron) Note-: (glazing shall be measured and paid separatly) Note:- (glazing shall be measured and paid separatly)

S&F 30mm thick flush door shutter soild core construction with block board core and plywood face panels commercial type on both sides, all as specified and as directed.

S&F second class hardwood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass gauge etc with sash bar divided into squares edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass or gauze etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.20 (a) fitted to chowkats .

Hacking out old broken glasses any thickness, size, quality or description from wooden frames glazed with putty or fixed with bead all as specified and as directed.

Ditto all as per Sr item No. 51 above but from metal frame including punching out or drilling out old glazing pins/spring clips and providing and fixing new all as specified and as directed.

S&F sheet glass ordinary quality 4 mm thick with oil putty not exceeding 0.5 sqm in each pane all as specified and as directed.

Ditto all as per item No. 53 above but pin head type

S&F tinted sheet glass ordinary quality 4.8 mm thick with oil putty exceeding 0.5 sqm in each pane all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and as directed.

Ditto all as per Sr item No. 56 above but fixed in repair to steel/wooden shutters, all as specified and as directed.

S&F in repair butt hinge, stainless steel 100mm long all as specified and as directed.

S&F in repair butt hinges stainless steel 75mm long all as specified and as directed.

S&F in repairs Continuous (Piano) hinges, stainless bright finished or electro galvanized, width of flaps (When open) 30 mm, all as specified and as directed.

S&F aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed.

S&F Floor door stopper of aluminium alloy body double and tongue anodised with rubber shoe and fixed of size 150 mm all as specified and as directed.

S&F aluminium anodised barred tower bolt of extruded section 200 mm long and fixed all as specified and as directed.

Ditto all as per Sr item No. 63 above but 150mm long.

S&F extruded aluminium alloy handle fabricated type anodised 150 mm long.

Ditto all as per Sr item No. 65 above but 100mm long.

S&F hasp and staple, safety type aluminium anodised with hinge pin including bolt to hing plate and fixed with screw 125 mm long all as specified and as directed.

M&L for mild steel frame work such as grills with ends of bar shouldered, welded or forged into spikes conforming to Fe 410-0 or Fe 310-0 and taking down old one, all as specified and as directed.

M&L for preparing new surfaces of wood of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Ditto all as per Sr item No. 69 above but on steel surfaces over red oxide primer, all as specified and as directed.

S&F 300 mm long, mild steel ordinary rat rail springs including roller and roller plate complete and taking down old one all as specified and as directed.

S & F of stainless steel curtain rods of dia 20mm and thickness of 1mm including brackets etc as in repair all as specified and as directed.

Taking down and re-fixing of Harrison/curtain rails, any type anodised aluminium alloy brackets, stops, rollers etc, all as specified and as directed.

M&L for welding in repairs n exc 2.5cm in length n exc 6mm thick all as specified .

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges shall be paid separately) including taking down old one.

Taking down aluminium doors/windows shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixng the handles & mortice looks in existing postiion with and includig new screws including refixing the door shutters in same opening etc complete all as specified and directed by Engineer-in-Charge Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.

M&L for 18/19 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work in partitions and fixed in repairs. all as specified and as directed.

S&F Block board, grade 1 quality, exterior grade, commercial type with one side decorative face 18/19mm thick, all as specified and as directed.

S&F Pressed steel frames for doors with one or more rebates of size 125 x 60mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, all as specified and as directed.

Dismantling of particle board,any thickness including cover fillets, all as specified and as directed.

M&L for 25mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with ccrews to timber frame work all as specified.

M&L for 1.5 mm thick Decorative laminate type 1 of surface finish ,colour and pattern as approved, all as specified and as directed.

M&L for 6mm thick Cover fillets of standard hard board 40mm wide and fixing with screws, all as specified and as directed.

S&F in repair aluminium extruded Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, all as specified and as directed.

Dismantling boarding, any description, fixed in wall or ceiling, any position with nails, all as specified and as directed.

S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

M&L for 4mm thick non asbestos fibre cement building boards of make 'E Board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework complete all as specified and directed .

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

S&F Wall / Ceiling Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

S&F in repair vitreous china wash basin, white back, size 500 X 400 mm x 190 mm , errecting on existing CI brackets including taking down old one alll as specified and as directed. Note: If the mentioned size is not available in the market, the next immediate higher size shall be provided by the contractor without any extra cost.

Supply and fixing in repair Table top wash hand basin size 480 x 480x 2000 excluding taps, waste, chain and plug but including brackets,necessary 32/40 mm brass chromium plated bottle traps with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed and cutting for bottle trap and pinning in ends of brackets or erecting stand.

S&F in in repair vitreous china squatting pan of orrisa pattern, size 580X 440x300 mm white, with integral foot rest 'P' or 'S' trap, including taking down old one complete all as specified and as directed.

S&F Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified.in repairs including seat cover with brass screws and excluding flush pipe and flushing cystren.

S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and taking down old one complete all as specified and as directed

S&F in repair PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including taking down old one all as specified and as directed.Make of parryware Code :Flair white E8094 Regular or others equvelent in jaquar and Hindware

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long., all as specified and as directed.

S&F in repair Soap dish, vitreous China white of approximate size 160 x 160 x 90 mm. Make of parryware or others equvelent in jaquar and Hindware.

S&F decorative Towel Ring of chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms). Make of parryware or others equvelent in jaquar and Hindware

S&F in repair tubular towel rail, chromium plated 20mm dia, C type, 60cm long between flanges. Make of parryware or others equvelent in jaquar and Hindware

S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. Make of parryware or others equvelent in jaquar and Hindware

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F 40mm low density polyethene pipe (LDPE) of pressure rating 6 Kg F/Sqcm fixed complete in wall, floor etc including taking down old one all as specified and as directed.

S&F in repairs 32/40 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed., all as specified and as directed.

Taking up or down steel tubing 15mm dia and connections, including cleaning for re- fixing or removal to store, all as specified and as directed.

Taking up or down steel tubing 20mm dia and connections, including cleaning for re- fixing or removal to store, all as specified and as directed.

Taking down and refixing old steel tubing of 15/20 mm bore and connections in new or old position after repair (walls, ceilings, floors etc.)

S&F for 15mm dia tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floor

S&F for 20mm dia tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floor

Supplying and laying 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including connecting to existing GI pipe line complete all as specified

Supplying and laying 20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including connecting to existing GI pipe line complete all as specified

Supplying and laying 25mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including connecting to existing GI pipe line complete all as specified

Disconnecting existing tanks,exc 500 n.exc 1000 Ltrs capacity setting aside for repairs, cleaning etc. and hoisting if required reconnectiong and re-fixing in position., all as specified and as directed.

Dismantling existing PVC water tanks of capacity exc 500 litres & n.exc 1000 litres all as directed and removed from site. NOTE:-Dismantled water tank shall become the contractors property as per Sch of credit.

S&F 500 litres rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed .

All as per Sr item No. 115 above but of capacity 1000 ltrs.

S&F Ball brass valve 20 mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule, all as specified and as directed.

S&F in repairs Fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. Make of parryware Code :G1951A1 or others equivalent in jaquar and Hindware

S&F in repair 15 mm bore Fancy type sink taps (Swan neck), Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Make of essco Code :TQT-523S or others equivalent in parryware and Hindware

S&F 15mm dia Chromium plated fancy type Bib taps long shank cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair all as specified and as directed.

S&F 15mm dia Chromium plated fancy type Bib taps cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair all as specified and as directed.

S&F in repair Brass chromium Brass CP wall mixer 3 in 1 system with provision of hand shower/overhead shower for mixing hot & cold water screwed down for iron pipe and fixed as all specifed and as directed.

S&F in repair Brass chromium Brass quarter turn CP hole washbasin mixer without popup for mixing hot & cold water screwed down for iron pipe and fixed as all specifed and as directed.

S&F bib tap 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms).

S&F pillar taps 15mm dia of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-110gms)

S&F nipple 20mm dia suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms)

Cutting existing steel tubing for alterations or additions (Each cut measured) without taking down steel tubing, all as specified and as directed.

S&F Nipple suitable for HDPE water tank. (Minimum weight 15mm-38gms/20mm- 45gms /25mm- 65gms)

S&F waste coupling of PTMT 40mm (half or full threaded) sutable for kitchen sink. (Minimum weight 32mm- 45gms/40mm-60 gms)

S&F in repair Brass chromium plated bottle traps of 32/40 mm dia for wash asins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, all as specified and as directed.

S&F grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms)

S&F in repair Chromium plated shower roses 125 mm dia size with or without swevel joints and size including fixing to steel pipe or union., all as specified and as directed.

S&F shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour.(Minimum weight 40gms

S&F PVC connections 15mm size with PTMT nuts of length 450mm

S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls.

S&F 110 mm bore PVC (SWR) bends of any radius.

S&F 110 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door.

S&F PVC (SWR) pipes single socketed, 75mm dia in any length with rubber ring joints, laid in trenches or in floors. all as specified and as directed.

S&F PVC (SWR) bends any radius 75mm bore.

S&F PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement, all as specified and as directed.

S&F PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement, all as specified and as directed.

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size mini 815mm x 455mm bowl size 355mm x 355mm x 185mm

S&F PVC mirror cabinet of size 400x920 mm with napkin rail in white colour etc complete all as specified and directed by Engineer-in-charge. Make of parryware Code :C881887 or others equvelent in jaquar and Hindware

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulationg pipe, etc. of exc. 500 n.exc. 1000 Ltrs capacity.

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulationg pipe, etc. of exc. 1000 n.exc. 2000 Ltrs capacity.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

S&F Rolled Mild Steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410 - W (Gde E-250) quality-A,

Dismantling of asbestos cement sheet (corrugated semi corrugated) any gauge, thickness, including ridge all as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified specified etc all as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified all as directed.

Taking down carefully copper/aluminum point wiring (light/fan/bell/socket, power point etc) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors etc complete all as specified and directed Engineer-in-Chage

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable drawn in and incl PVC Casing and capping ISI Marked with its accessories PVC boxes (upto 18 module suitble for Mylinc series of Legrand including white plates with frame upto 18 module of make suitable for Mylinc Series ) for fixing switches/socket/regulators etc incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable as earth continuity conductor to common earth & connecting to earth dolly for the following, all as specified and directed. Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2.Wiring shall be done as per complaints recd from user only on required basis it is not necessary to do whole wiring of any whole bldg 3. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc

One light point controlled by switch 5 Amp single pole one way

One fan point controlled by switch 5 Amp single pole one way

One bell point controlled by one switch 5 Amp single pole, one way on independent board

One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch

One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board

All as per Sr Item No 154 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase , Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board

M&L for point wiring complete concealed type with two runs of 1.5 Sqmm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable drawn through and including PVC rigid conduit not less than 20 mm dia with its accessories with Flush mounting modular metal boxes (upto 18 module suitble for Mylinc series of Legrand with and including white plates with frame upto 18 module of make suitable for Mylinc Series) for fixing switches/socket/regulators etc with and including 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable as earth continuity conductor to common earth & connecting to earth dolly for the following, etc complete all as specified and directed by Engineer-in-Charge. Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Wiring shall be done as per complaints received from user 3. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc

One light point /fan point/bell point controlled by one switch with cables 1.5 sq. mm size

One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch

One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board

One light point controlled by switch 5 Amp single pole two way

All as per Sr Item No 155 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase , Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board

S&F switch piano flush type single pole, one way 5/6 Amp etc complete all as specified and directed by Engineer-in-Charge

S&F bell push piano flush, single pole, one way 5/6 Amp etc complete all as specified and directed by Engineer-in-Charge

S&F bell ding dong elelctric 230V AC single pole etc complete all as specified and directed by Engineer-in-Charge

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required etc complete all as specified and directed by Engineer-in-Charge.

S & F electronic dimmers,as per existing wattage, 250V flush type on the exiting phenolic laminated sheet etc. as required etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Switch, 6 Amp, one way, one Module as per existing. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Switch, 6 Amp, two way, one Module. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Switch, 16 Amp, one way, one Module as per existing. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Socket Outlet 6 Amp, 3 pin, combined two module etc complete all as specified and directed by Engineer-in-Charge.

S&F Modular Socket Outlet 6 Amp / 16 Amp - 2/3 pin combined two module complete all as specified and directed by Engineer-in-Charge

S&F Modular Bell push, 6 Amp, one module etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge

M&L ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge

S&F Socket outlet 3 Pin ,6 A etc complete all as specified and directed by Engineer-in-Charge

S & F in replacement double door Sheet metal enclosures factory made DBs 4 way SPN, 240 volts ,Concealed in wall protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand / Simens/ L&T/Havells

Supply & fixing MCB , SP, AC, 240 Volts of 06 to 32 Amp capacity 16KA, 'B' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing MCBs, TPN, AC, 415 volts of 63 Amps capacity 10 KA, 'B' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing MCBs, SPN, AC, 240 volts of 40 Amps capacity 10 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing MCBs, SPN, AC, 240 volts of 63 Amps capacity 10 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Taking out old PVC/Wooden/metal switch board ,wire connection from the wall and fix new PVC Modular box including connecting wire suitable for fixing switch/ Socket/ fan regulater of following sizes. (Note.Damaged Switch/Socket/regulator will be measured and paid Sepereately)

Supply and fix square profile LED lighting fixture , environmental friendly, energy efficient ready to use pack LED Tube light fitiing 22 Watt aluminium housing with LED light source 6500 K,input voltage 140V-270V with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge.

S&F square profile LED lighting fixture with extruded aluminium housing, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 12 Watt input voltage 140V-270 V with LED light source 6500 K with uniform light output, with all accessories including its connection with 2 core seathed cable of size 0.5 Sqmm with etc complete all as specified and directed by Engineer-in-Charge.

S&F environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit 10 W LED ,IP65 ,IK 08 rated product luminaire comprising of high brightness LEDs complete with all accessories prewired and including connecting up with & including twin core twisted flexible copper conductor cable of suitable size etc complete all as specified and directed by Engineer-in-Charge

Supply & fix replacement industrial type switch socket for Geysers with 20 Amp MCB etc complete all as specified and directed by Engineer-in-Charge

S&F sub main wiring with two single core PVC insulated,unsheathed, FRLS stranded copper conductor cable 4 Sqmm with 4 Sqmm PVC insulated, unsheathed, FRLS stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 4 Sqmm cable i.e for one run for phase, one run for neutral with one run of 4 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit.

Taking out/down carefully and opening of existing water Geysers of 25 Ltrs capacity,from any position, of any make etc & refixing after reassembling and after repair /replacement of spare parts/ material/items ( such as outer and inner tank) at the desired location and making necessary water inlet, outlet & electric connections to make it functional with including using material/parts of minor nature such as screws, insulation tape, nuts, bolts, washers etc including cleaning to required gloss with white synthetic enamel paint on complete body & writing MES No with black synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement element 2 KW, rubber gasket type with & including rubber gasket complete suitable for 25 Ltrs Geysers of any Make as installed at site etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement PVC insulated cable 40/0.0076, 3 core copper conductor cable for connection from geyser to top plug etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement indicator lamps(set of two -green & red) AC, 220 volts suitable for 25/50 ltrs capacity vertical type geyser etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement thermostat switch , pointer type with adjustable knob, suitable for 25/50 ltrs capacity vertical type geyser & etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix PVC connection pipe for Geysers complete with brass end terminal size 300 mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix PVC connection pipe for geysers complete with brass end terminal size 450 mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement thermal cut out suitable for 25/50 ltrs capacity vertical type geyser etc complete all as specified and directed by Engineer-in-Charge.

Taking out/down existing ceiling fans upto 1400 mm sweep,from any position, of any make etc and handover to user to deposit E/M Store yard & refixing Serviceable fan at the desired location making electric connection by replacing PVC insulated unsheathed cable of copper conductor of size 1.50 Sqmm upto 0.50 Mtr length with & including using material/parts of minor nature such as screws, lugs, insulation tape, nuts, bolts, washers etc after cleaning the metal surface, greasing/lubricant etc to make it functional etc complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement capacitor 2.5 mfd, 250 volts , AC etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of rubber reel, bolt, nut including pin etc complete all as specified and directed by Engineer-in-Charge.

Supply only conopy (top and bottom) of ceiling fan , of any sweep, any make etc complete all as specified and directed by Engineer-in-Charge.

S & F for modular plates white colour with frame of 3 module including removal of old unserviceable one complete complete all as specified and as directed

S & F for modular plates white colour with frame of 6 module including removal of old unserviceable one complete complete all as specified and as directed

S & F for modular plates white colour with frame of 10/12 module including removal of old unserviceable one complete complete all as specified and as directed

S & F for plastic body exhaust fan, AC single phase, 240 V of size 150 mm sweep including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed.

S & F for plastic body exhaust fan, AC single phase, 240 V of size 200 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed

S & F blanking plates round/square in wall for fixing Ceiling roses,etc as specified and as directed

Preparing the old painted surfaces of following steel furniture by removing old paint & touching up with Red oxide primer where necessary & denting where necessary & preparing the surfaces & spray / mannualy painting with two coat of synthetic enamel paint as per existing colour of articles all as specified & directed. NOTE : Spray painting shall be carried out mechanically.

Almirah med steel W/S

Almirah large steel W/S

Book Case steel (Glass door)

Teapoy varandah

Charpoy IP Steel Hardtop

Table 900 x 600 W/O drawer

Table 900 x 600 with drawer

Chair Varandah

Shoe Rack Steel

Bed Hard Steel

M&L One coat of french polish on wooden surface of any width or girth incl scrapping and cleaning all as per drg and as directed by Engineer-in-charge. Polishing to following wooden furniture items shall be carried out in occupied quarters.

Almirah large with shelves

Almirah medium 1/2H 1/2SH

Almirah medium with shelves

Bed with plywood top

Book shelf open large

Book case small

Book case various type

Chair Easy

Chair Dining cushioned

Chair writing

Chair Dining

Hat stand W/M

Peg Table

Table bed side w/o drawer

Teble centre (FD)

Table Dinning 6 persons

Table dressing ladies W/M

Table dressing gents W/M

Teapoy FD

Table writing

Table 3' x 2' W/O drawer

Table 3' x 2' with drawer

Table Dining 04 Person

Table Dining 08 Person

Sofa Set 05 Seater

Sofa Set 04 Seater

M/s AG PATHAN

M/s IBEX Engineers and Contractors

Ms. M.D. Auty

MS. G.A. CONSTRUCTION