PROVN OF FLOOR TILES, WHB AND SINK IN DSC QTRs and WEATHER SHED AT 6 ASC AT COOTON GREEN AREA AND PROVN OF WALL MOUNTED FILE CABINETS IN HQ BUILDING AT AFS MUMBAI UNDER GE(AF)THANE

Amount

Demolition cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) ,complete all as specified and as directed by Engr-in-charge.

M&L for cement concrete 1:4:8 type D-2 using (40mm graded stone aggregate) in floor, foundation, filling and mass concrete ,complete all as specified and as directed by Engr-in-charge.

M & L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including Screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes ,complete all as specified and as directed by Engr-in-charge.

M&L for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces ,complete all as specified and as directed by Engr-in-charge.

M & L for coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the existing surfaces ,complete all as specified and as directed by Engr-in-charge.

S&F GI tubing 15 mm with all fitting medium grade fixed complete to walls and ceilings or laying in floors ,complete all as specified and as directed by Engr-in-charge.

All as per Srl item No 6.00 above but for 20 mm dia

S&F 15mm bib taps cast copper alloy with crutch or butterfly handle secured for iron pipe ,complete all as specified and as directed by Engr-in-charge.

S&F 10 ltr capacity PVC valve less syphonic action type flushing cistern,low level, white ,with inlet ball valve, float and handle including bracket and 32 mm dia HDPE flush pipe and connected to squatt pattern water closet ( Flush shall be fixed at suitable height for smooth functioning ) ,complete all as specified and as directed by Engr-in-charge.

S&F 15mm bore stop valve fancy type, chromium plated,cast copper alloy screwed down high pressure with capstan or butter fly handle screwed both ends for iron pipe or for unions and fixed ,complete all as specified and as directed by Engr-in-charge.

S&F vitreous china wash hand basin, white flat/angle back size 450x300mm complete including necessary cutting for and pinning in ends of brackets )including brackets and 750mm long PVC waste pipe 32mm bore ,complete all as specified and as directed by Engr-in-charge.

S&F pillar tap 15mm bore cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe or for union ,complete all as specified and as directed by Engr in Charge.

Supply and fixing PVC connection 450 mm long with brass coupling on both end suitable for 15 mm bore of pipe ,complete all as specified and as directed by Engr-in-charge.

M&L for PVC (SWR) floor trap 75 mm dia of outlet with stainless steel grating including jointing to waste pipe in run led joint ,complete all as specified and as directed by Engr-in-charge.

S&F PVC (SWR) `P` or `S` trap suitable for 110mm bore pipe ,complete all as specified and as directed by Engr-in-charge.

S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring joints fixed to walls with MS flat iron clamps with 50x6mm and 16mm dia round bar stay of required shape and size inclduing drilling holes and embedded in Cement mortor 1:3 surface finished ,complete all as specified and as directed by Engr-in-charge.

S&F of vitreous china squatting pan `orissa’ pattern, size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including provision of lime concrete bedding ,complete all as specified and as directed by Engr-in-charge.

M&L for RCC cement concrete type B1 (1:2:4) using 20mm graded stone aggregate as slabs supported on walls, beams/lintel bands and columns in roofs, floors, landings, deck slabs ,complete all as specified and as directed by Engr-in-charge.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-510 ,complete all as specified and as directed by Engr-in-charge.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick flat and fair finished surfaces ,complete all as specified and as directed by Engr-in-charge.

Taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water ,complete all as specified and as directed by Engr-in-charge.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick surfaces of walls finished the surface fair and even ,complete all as specified and as directed by Engr-in-charge..

M&L for Preparing newly plastered surfaces and applying two coats of OBD over a coat of primer on walls ,complete all as specified and as directed by Engr-in-charge.

M&L for washing, rubbing down and stopping of distemper and painted surfaces of walls and apply one coat of oil bound distemper ,complete all as specified and as directed by Engr-in-charge.

M&L for preparing old plaster surfaces of walls and apply one coat of cement base paint ,complete all as specified and as directed by Engr-in-charge.

M&L for preparation of old wooden surfaces of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint ,complete all as specified and as directed by Engr-in-charge.

S&F PVC waste pipe 32 mm bore ,750 mm long ,complete all as specified and directed. .

S&F sinks with drainage board made of stainless steel of miniumum 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm ,complete all as specified and as directed by Engr-in-charge.

S&F 40mm Waste coupling of PTMT (half or full threaded). (Minimum weight 32mm- 45gms/40mm-60 gms) ,complete all as specified and as directed by Engr-in-charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in Hard/dense soil., etc complete all as specified and directed.

Excavation in trenches in hard/dense soil n exc 1.5m deep and n.exc 1.5m wide and getting out , ,complete all as specified and as directed by Engr-in-charge.

M&L for Plain Cement concrete in foundations, filling and mass concrete ,type D-2 (1:4:8) using 40mm graded stone aggregate as in foundations, filling & mass concrete ,complete all as specified and directed by Engr-in-Charge.

M & L for Pre-cast cement concrete block masonry wall with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 ,complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in bed block/coping and similar work including use and waste form work,complete all as specified and directed by Engr-in-Charge.

M&L for 10mm thick rendering in CM (1:6) on fair faces of block masonry or concrete surface finished even and smooth (without using extra lime or cement) ,complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering in CM (1:4) on other than fair faces of block masonry or concrete surface finished even and smooth (without using extra lime or cement) ,complete all as specified and directed by Engr-in-Charge.

M&L for preparing new surface of wall and applying two coat of white wash with 3mm thick wall care putty on internal wall etc ,complete all as specified and directed by Engr-in-Charge.

M&L for preparing new surface of wall and applying two coat of cement paint over a coat of alkali resistant primer on external wall etc ,complete all as specified and directed by Engr-in-Charge.

S & F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240,etc ,complete all as specified and directed by Engr-in-Charge.

S & F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted,bolted or welded attachment, Fe 410-W (Gde-E-250) quality-A,etc complete all as spd and directed.

S & F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 ,complete all as specified and directed by Engr-in-Charge

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc ,complete all as specified and directed by Engr-in-Charge

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an approved colour having tensile strength of 550 Mpa as in ridge , fixed with self tapping screws ,complete all as specified and directed by Engr-in-Charge

M & L for preparation of new or previously untreated steel surfaces n exc 10 cm in width or girth when unconnected with other painting or painted in different tint including applying 02 coats of Synthetic enamel ( ordinary tint ) paint over one coat of red oxide primer ,complete all as specified and as directed by Engr in Charge. .

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering ,complete all as specified and as directed by Engr in Charge.

M & L Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface ,complete all as specified and as directed by Engr in Charge.

M&L for PCC 75mm thick,Cement concrete type D-2,1:4:8 ( using 40mm graded stone aggregate) in sub base ,complete all as specified and as directed by Engr in Charge.

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in cement plaster 1:6 ,rubbing and polishing etc ,complete all as specified and as directed by Engr in Charge.

Returning, filling in approved earth including spreading, levelling watering and well ramming in layers n.exc 25cm in foundation in hard/dense soil complete all as specified and directed.

Removing excavated material exc. 13.50 km but n exc. 15 km and depositing soil where directed, etc complete all as specified and directed.

Providing 18mm thick Factory made 100% solid rigid PVC (poly Vinyl chloride ) foam sheet plain colour having density density of 600 kg/ Cbm manufactured by ISO 9001 - 2015 Certified Company. Termite proof, water proof and flame Reterdant PVC sheet, fixing with screws are any type of adhesive (pigment) complete.Manufactured by single layer extrusion process ,complete all as specified and as directed by Engr in Charge.

Providing 18mm thick Factory made 100% solid rigid PVC (poly Vinyl chloride ) foam sheet prelam colour having density density of 600 kg/ Cbm manufactured by ISO 9001 - 2015 Certified Company. Termite proof, water proof and flame Reterdant PVC sheet, PVC film limanate should be pasted on PVC sheet with suitable adhesive and of approved shade fixing with screws are any type of adhesive (pigment) ,complete all as specified and as directed by Engr in Charge.

S&F mild steel Fe-410-W(Gde-E-250)quality-B, Joist, channel,angle,or tee sections, fixed independently,connecting plates, etc,(cut to ordinary lengths i.e.within 20mm of the length indicated), ornamental and intricate design ,complete all as specified and as directed by Engr in Charge.

S & F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, Fe 410-W (Gde-E-250) quality-B,etc , ornamental and instricate design , complete all as spd and directed.

S & F 12 mm thick plywood,grade BWR,type BB,fixed with screws to timber frame works incl necessary cutting ,complete all as specified and as directed by Engr in Charge.

S & F 12 mm Partical board, medium density , flat pressed single layer type or three layer type with BWR type adhesive fixed with screw to timber frame work in ceiling flat or sloping ,complete all as specified and as directed by Engr in Charge.

S&F 18mm to 19 mm thick prelaminated particle board interior grade, prelaminated both sides with decorative choice laminations fixed with screws to timber frame work ,complete all as specified and as directed by Engr in Charge.

S&F Magnetic catches for cupboard of size as directed by Engr-in-charge as per site requirement.

S&F 400mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised ,complete all as specified and as directed by Engr in Charge.

S&F 100mm Parliament hinges, mild steel cold rolled ,complete all as specified and as directed by Engr in Charge.

Extra over rates for external teak wood lipping 6 mm thick fixed with nails ,complete all as specified and as directed by Engr in Charge.

M&L for (wooden ) fillet work using 2nd class hard wood exc 6 & n. exc 13 sq.cm fixed with screw, plane fillet square, rectangle in section clean swan, secuared with nails or brads ,complete all as specified and as directed by Engr in Charge.

S&F Mortice lock with two levers (vertical type), brass body 100 mm length of latch and fixed ,complete all as specified and as directed by Engr in Charge.

S K ENTERPRISES

CROSSLINE ENGINEERS AND CONTRACTORS

Vinod Enterprises

Parmatma Enterprises

M/s Shreeji Construction Co