ADDN/ALT AND IMPROVEMENT TO QTR NO 9/3, 10/1, 10/2 AND 10/3 THIMMAYA MARG AND PROVN OF VEH PARKING AND FENCING AT CCSD UNDER GE (WEST) LUCKNOW

Amount

Demolition of Concrete concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

Demolition of cement concrete (reinforced) such as beam, roof, shelves, manhole cover, chajjas and similar suspended work complete all as specified and directed.

Demolition of old brick work or stone/boulder masonary built in cement mortar including all quoins, pillars etc but excluding ashlar facings, dressed stone work and precast articles complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

Dismantling of wall and ceiling board (fibre, pulp,insulation etc ) any thickness including cover fillets complete all as specified and directed

Dismantling stone slab and tiles of any description or thickness laid bedded & pointed in any mortar complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but not exc 4.0 Sqm each complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each, complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) exc 1.5 n. exc 4 sqm each and refixing in the same opening complete all as specified and directed.

Taking down shutter exc 1 Sqm but not exc 2 sqm each complete all as specified and directed.

Taking down steel door of size exc. 5 Sqm but n exc 7.5 sqm and refixing in the same opening after removing of dents including welding and complete overhaulling incl resizing easing etc. complete all as specified and directed.

Material and Labour cutting V shaped grooves and grouting the same with using cement slurry in CM 1 : 3 with and including mixed with water proofing compound as per manufacturer instrcutions complete all as specified and directed.

Taking down steel tubing and connection 15mm bore incl cleaning for refixing or removing from site and Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.

Taking down steel tubing and connection 20mm bore incl cleaning for refixing or removing from site and Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.

M&L for brick work with old size fly ash bricks of class designation 75, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L Brick work, with sub class 'B' burnt bricks, straight or curved on plan to any radius as in half brick thick walls built in CM. 1:4 using old size brick complete all as specified and directed.

Taking down cement plaster from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L 15 mm thick rendering in CM (1:6 ) on brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and Labour for rendering 15 mm thick cement plaster in CM 1:4 with water proofing compound (@ 3% by weight of cement) on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement all as specified and directed. (Note:- Water proofing compound shall be measured and paid seprately.)

M&L 10mm thick rendering in CM (1:3 ) on any faces of brick wall or concrete surfaces in ceiling finished fair and even complete all as specified and directed.

Supply only integral water proofing compound conforming to IS 2645 complete all as specified and directed.

Material and Labour for preparation of newly plastered surface of wall applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over over a coat of 1mm thick wall putty new surfaces complete all as specified and directed.

Material and Labour for preparing of new plastered surface of walls and applying two coats of distemper oil emulsion over a coat of primer over a coat of wall care putty 1mm thick all as specified and directed.

M & L for preparation of new plastered surface of walls by washing rubbing and applying two coats of cement based paint over a coat of white cement primer complete all as specified.and directed. .

Material and Labour for preparing of new plastered surface of wall and applying two coats of white wash complete all as specified and directed.

Material and Labour for preparing newly plastered surface of ceiling & applying two coats of white wash complete all as specified and directed.

Material and Labour for complete removal of existing surface including preparing old treated surfaces of walls and applying two coats of distemper oil emulsion over a coat of wall care putty 1mm thick complete all as specified and directed.

Material and Labour for complete removal of existing surface including preparation of old treated surfaces of ceiling and applying two coats of white wash complete all as specified.

Material and Labour for complete removal of existing surface including preparation of old treated surfaces of wall and applying two coats of white wash complete all as specified.

Material and Labour for complete removal of existing surface including preparation old treated surface of wall and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and all as specified.

Material and Labour for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

Material and Labour for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and Fixing floor door stopper two legged and tongue with hard drawn steel spring, 140mm all as specified and directed.

Material and Labour for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) 25mm thick as in sub base all as specified and directed.

Material and labour for coloured vitrified tiles of size 600x600x10mm thick as in floor set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including screed bed or bedding layer of 15mm thick in CM 1:6 complete all as specified and directed.

Material and labour for coloured vitrified tiles of size 600x600x10mm thick in vertical surfaces such as dado/skirting with and incl 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

Material and Labour for Coloured Non -Skid Ceramic tiles 7 to 8 mm thick, area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc set and jointed in neat cement slurry & pointed in colour cement to match the surface over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and Labour for Coloured Non -Skid Ceramic tiles 7 to 8 mm thick, area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry & pointed in colour cement to match the surface over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and Labour for Coloured Non -Skid Ceramic tiles 7 to 8 mm thick, area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in skirting etc set and jointed in neat cement slurry & pointed in colour cement to match the surface over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

Material and Labour for coloured glazed ceramic tiles 350 x 250 x 7 mm/ 450 x 350 x 7mm thick on vertical surfaces such as skirting/dado including 10mm thick backing coat in CM (1:4) complete all as specified

M & L for Machine cut kota stone slab 20-25mm thick in risers of steps, skirting, dado and pillar etc over and including 10 mm thick rendering in cement mortar 1:4 laid and jointed with grey cement slurry and pointed in grey cement mixed with pigment to match the shade of the slab including rubbing and polishing all as specified and directed.

M & L for Machine cut kota stone slab 20-25mm thick in floors over cement screed base 15mm thick in cement mortar 1:6 laid and jointed with grey cement slurry and pointed in grey cement mixed with pigment to match the shade of the slab including rubbing and polishing all as specified and directed.

M & L for rounding and polishing edges of kota stone slabs as in treads, cills, platforms etc all as specified and directed.

Supply and fixing in repair for 15mm bore CP central hole basin mixer for WHB mixer complete all as specified and directed. Make:- Jaquar,Plumber,L&K

S&F Vitreous China squatting pan, 'Orissa pattern', size 580x440mm, white, with integral foot rests including PVC 'P' or 'S' trap, excluding flushing cistern and flush pipe, including connection to trap and flushing pipe etc. and making good to floor complete all as specified and directed.

S & F in repair vitreous china Water closet pedestal pattern with seat cover white and flushing pipe 32mm dia for low level flushing cistern (excluding fixing bolts, flushing cistern and flush pipe) including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc complete all as specified and directed.

S & F in repair PVC low level flushing cistern 10ltrs capacity, syphonic action type, white with inlet ball valve, float and handle including brackets with 32mm dia flush pipe of polythelene of low or high density complete all as specified and directed.

S & F in repair hand shower (health faucet) with 1 m long flexible tube suitable for hot and cold water supply including wall hook, bracket etc complete set of superior quality complete all as specified and directed.

Supply and Fixing in repair stainless steel kitchen plate rack made out stainless steel of not less than 1mm thick sheet of size 900mm x 7500mm x 250mm of approved pattern.

Supply and Fixing in repair Wall Mixer 3 in 1 system for mixing hot and cold water, connecting legs, wall flange with provision of both hand shower and overhead shower complete with 115mm long bend pipe complete all as specified.

Supply and Fixing in repair CP stop/angle valves 15mm bore, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle complete all as specified and directed.

Supply and Fixing in repair CP bib taps long body type, 15mm bore, fancy type Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified.

Supply and Fixing in repair PVC connection pipe 15mm bore, 600mm long with PTMT nuts complete all as specified and directed.

Supply and Fixing in repairs rotational moulded triple layered white coloured polyethylene water storage tank, cylindrical, hoisted & fixed in position all as specified, capacity 500 ltrs including dismantling old water tanks of same capacity complete all as specified and directed.

Supply and Fixing 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball and fixed complete all as specified and directed.

S&F in repair Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

Supply and Fixing in repair WHB vitreous China white flat back size 550 x 400mm incl brackets, brass CP waste coupling and PVC waste pipe including cutting for and pinning in ends of brackets or erecting stand all as specified and directed.

Supply and Fixing chromium plated cast copper alloy fancy type pillar tap 15mm bore all as specified and directed.

Supply and Fixing in repair 15mm bore concealed stop valves, brass chromium plated, long shank with capstan head and cup screwed both ends for iron pipe or for union all as specified.

Supply and Fixing in repair Gun-metal, globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron pipe all as specified .

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc complete all as specified and directed.

Supply and Fixing in repair 100mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with lead joints laid in trenches or in floors complete all as specified. Lead joint will be measured and paid saperately.

Material and labour lead joints for 100 mm dia cast iron pipes and fittings complete all as specified and directed

Supply and Fixing in repair 75mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with cement joints and fixed to walls complete all as specified.

Supply and Fixing for cast iron bends (any radius) diminishing pieces or tapers for 100mm dia complete all as specified and as directed.

Supply and Fixing for cast iron bends (any radius) diminishing pieces or tapers for 75mm dia complete all as specified and as directed.

Material and Labour 100 mm dia cast iron floor trap, with grating including jointing to waste pipe, fixed in plain cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate complete as directed.

Supply and Fixing in repair CP brass tubular towel rail 20 mm dia 'D' type, 60 cm long between flange complete all as specified and directed.

Supply and Fixing kitchen sink with drainage board, made out of 1mm thick stainless steel sheet with plug, washer, stainless steel waste coupling, PVC waste pipe including bedding in cement mortar, connection to union and drain pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repair PVC coloured bath cabinet overall size 560 x 410mm decorative design with looking mirror including all fittings complete all as specified and directed.

S & F in repair Glass corner shelf fancy type 250x250 and 10mm thick fixed on brass bracket and screwed complete all as specified and directed. Make : Jaquar Cat No 7771 or equivalent of Marc/ESS

S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. Make : Jaquar Cat No 7771 or equivalent of Marc/ESS

S & F Factory made single extruded WPC (Wood Polymer composite) solid door/window/ceosetory windows and other frames / chowkhat of size 65 x 125mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade) Calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (Max toxicity index 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having min frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) & 1100N (Edge), min compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fasts / lugs/ stainless steel dash fasterners of required dia and length complete as per the direction of Engr-in-charge. (MS hold fasts / lugs / SS dash fasterners shall be paid seprately.) Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Returning, filling in, trenches including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft/ loose soil complete all as specified and directed.

Removing surplus excavated material soils exc 500 m but n.exc 1000m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

M & L for factory made rubber moulded, machine pressed precast 80mm thick PCC inter locking paver blocks M-40 grade conforming to IS-15658-2006, glossy finish, design & pattern as approved by GE as in hard standing over and including 25mm thick sand cushioning with fine sand and filling of joints with fine sand or coloured pigment complete all as specified and directed:

S & F Factory made single extruded WPC (Wood Polymer composite) solid door/window/ceosetory windows and other frames / chowkhat of size 65 x 100 comprising of virgin PVC polymer of K value 58-60 (Suspension grade) Calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (Max toxicity index 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws havinf min frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) & 1100N (Edge), min compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof water / moisture proof and fire retardant and fixed in position with MS hold fasts / lugs/ stainless steel dash fasterners of required dia and length complete as per the direction of Engr-in-charge. (MS hold fasts / lugs / SS dash fasterners shall be paid seprately.) Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S & F Factory made single extruded WPC (Wood Polymer composite) solid door/window/ceosetory windows and other frames / chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade) Calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (Max toxicity index 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws havinf min frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) & 1100N (Edge), min compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof water / moisture proof and fire retardant and fixed in position with MS hold fasts / lugs/ stainless steel dash fasternersof required dia and length complete as per the direction of Engr-in-charge. (MS hold fasts / lugs / SS dash fasterners shall be paid seprately.) Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded prelaminated PVC sheet of desinged approved by engineer-in-charge ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheets for feathered top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of approved prelaminated colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed & skelton shutters ,open rebated, prepared to receive glass, gauze etc,without sash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specifed in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chowkhats all as specified.

S & F 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face supplying of approved designed and colour & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F Stainless steel steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.18mm and fixed with stainless steel wire staples complete all as specified.

S & F 18mm thick factory made 100% solid WPC flush shutter (for cupboard and vanity etc) made from co-extruded three layer rigid foam sheet Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400kg/cum and density of center core not less than 600kg/cum, with prelamination on both front and back side manufactured by and ISO 9001/2015 certified company complete all as specified and directed.

S & F 8 to 10 mm dia dash through bolts (anchor fastner) of length exc 75mm but n. exc 150mm including drilling holes in concrete/masonary walls/structure using electrically operated drill machine complete all as specified and directed at site. Note : Rate quoted includes cost of one 3 mm thick GI washer and one hexagonal GI nut per bolt.

S & F 18/19 mm thick commercial plywood interior grade both side fixed with screws to timber frame work edge chamfered including beading/battens as required as directed by Engineer-in-Charge complete all as specified and directed.

S & F 0.9 mm thick Decorative laminate (sunmica) type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructionas directed by Engineer-in-Charge complete all as specified and directed.

Supply and Fixing 30 mm width of flaps continuous piano hinges mild steel bright finish all as specified and directed.

Supply and Fixing Magnet Catcher heavy duty for cupboard door shutter complete all as specified and directed.

S & F 50 mm dia, cupboard knobs polished, hard wood knobs fixed with screws for kitchen cabinet & below platform complete all as specified and directed..

S & F 100mm size aluminium handle fabricated type anodised complete all as specified and directed.

S & F 100mm size aluminium anodised hasp and staple, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F 150 mm MS ordinary rat tail pattern spring including roller & roller plate complete all as specified and directed.

Material and Labour for PCC type B-1 (1:2:4) (20mm graded aggregate) as in benching and coping incl necessary formwork complete all as specified and directed.

Material and Labour for Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion exc. Half brick but n exc one brick in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

Material and Labour for Cutting chases, pining in making to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting exceeding 20 cm girth in brick walls etc complete all as specified and directed.

S & F stainless steel Butt hinges "medium weight" steel 100mm size all as specified and directed.

Supply and Fixing Cloth hanger rod 18-20mm dia steel chromium plated for hanging the clothes in wardrobe including suitable brackets complete all as specified and directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note:- For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 0.75 sqm.) comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note:- For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

Supply and Fixing sheet glass 5.5mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed.

Supply and Fixing 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

Supply and Fixing aluminium anodized barrel tower bolts, 200 mm of extruded section and fixed complete all as specified and directed.

Material and Labour for preperation of concrete/plastered surface of floor/wall/chajja and applying a coat of acrylic polymer modified cementitious slurry consisting of one part of TAPECRETE P-151 manufactured by CICO or CemCrete/Raintite manufactured by Sika and two parts of cement by weight complete all as specified and directed.

Material and Labour for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

S&F Exterior tiles of superior quality 10-12mm thick of approved size design and shade and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed. Make:- Duracrete / Pivot / Johnson/NITCO

Material and Labour for 75 mm thick PCC 1:3:6, type C-2 using 40mm stone aggregate as in plinth protection finished even and smooth without using extra cement and forming dummy joints complete all as specified and directed.

Supply and Fixing in repair 25mm dia fancy type drapery curtain rod made out of stainless steel side brackets and other necessary fittings complete all as specified and directed.

M&L for 18-20mm thick Granite stone slab, machine cut and polished as in cooking platform in full lenght,and window cills bedded and jointed with grey cement slurry and pointed to match the shade of granite sotne, laid over and including 20mm thick screed bed in cement mortar 1:4, including rubbing, grinding, making hole for gas pipe line and including making sandwitch moulding to edges complete all as specified and directed.

M&L 18-20mm thick granite stone slab, machine cut and polished in shelves and partition in cupboards, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shades of granite stone, including rubbing, grinding, polishing including making sandwitch moulding to edges complete all as specified and directed.

M & L for obliterating building number plaque and painting background using black synthetic enamel paint and building number with white synthetic enamel paint, overall area of building number plaque exc 0.10 sqm but not exc 0.40 sqm each complete all as specified and directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.

Material and labour treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

Supply and Fixing framed work as in doors or gates of angle or tubular or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe 290 Gde E-165. complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F in repairs multi-rib TM profile, tensile strength 550 Mpa, colour coated 0.50mm thick pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet, having maximum pitch of 250mm c/c and minimum 30mm crest depth in length as per site requirement, the feed material manufactured out of 0.50mm (TCT) with coating of 18-20 microns top coat over 5 microns primer and 8-10mm alkaline back of zinc aluminium alloy of AZ-150, including the sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium 55% and silicon 1.5% with total mass coating of 150 gms/sqm on both sides having covered width 1020mm and return leg for proper side lap as in roof covering/ cladding and fixed with self tapping screws with EDPM seal complete all as specified and directed.

S & F 8mm Uv resistance Polycarbonate sheets fixed with the relevant aluminium section with the help of screws and support rods, or can be easily welded etc of specified colour and curvature as specified and directed by Engineer-in-Charge.

Material and Labour rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates Fe 410-W(Gde- E- 250) quality-A Complete all as specified

Material and Labour for rendering 15 mm thick cement plaster in CM 1:4 with water proofing compund (@ 3% by weight of cement) on concrete surface as on roof top before rooftreatment and finishing the surface even and smooth using extra cement all as specified and directed. (Note:- Water proofing compound shall be measured and paid separately.)

Demolition of PCC in padding above ground floor and paving n. exc 15cm thick complete all as specified and directed.

M & L cement concrete type B-0 (1:2:4) (12.5mm graded stone aggregate) as in roof padding for levelling / maintaining slope etc complete all as specified and directed.

M & L for PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete all as specified and directed.

M & L for PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete all as specified and directed.

Supply and Fixing mild steel flat iron fillets for hold fasts and similar small articles conforming to Fe 290 Gde E-165 complete all as specified and directed.

S & F framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framed work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M&L mild steel framed work such as posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting and/or welding etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply of 3mm dia GI wire chain link fencing with 50x50mm mesh size and fixed to any type of strandard rails straining bolts etc including provision of binding wire complete all as specified and directed..

Fixing only chain link fencing including line wires, any mesh, size and type fixed to any type of standards rails, straining bolts, etc.including provision of binding wire complete all as specified and directed.

Material and Labour for form work to sides and soffits of floor or roof beam, beam haunchings, girders, bresummers, lintels, cantilevers, shelves including support overhang etc also splays in floor and beam etc complete all specified and directed.

Material and Labour for RCC 1:1.5:3 type A1 using 20mm graded stone aggregate as in slab supported on wall, lintel, shelves etc complete all as specified and directed.

Material and Labour 10mm dia and over mild steel TMT bar, cut to length, bent to shape required including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.

M & L for 100 mm thick cement concrete 1:2:4 type B2 (using 40mm graded stone aggregate) at roof top for bed of water tank complete all as specified and directed.

M & L for 100 mm thick cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring and finishing the surface even and smooth using extra cement complete all as specified and directed.

M & L for provision of roof treatment with polymeric water proofing membrane all as given below :- (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.25 Iitres/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non oven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) M & L for two coats of aluminium paint on membrane surface all as specified and directed.

Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. M & L for providing water proofing treatment to sunken floors all as given below :- (a) Making fillet of size 25mm x 25mm at corner of slab and wall with polymer modified cementitious (PMC) mortar consisting of one part of tapecrete P-151, two parts of cement and 6 parts of fine sand by weight. (b) Sealing of joints of pipe with epoxy putty CICO POXY LC or epoxy mortar CICO POXY 2125. (c) Cleaning the concrete surface by brushing & watering and applying a coat of tapecrete P-151 Acrylic Polymer Modified cementitious slurry consisting of one part of TAPECRETE P-151 and two parts of cement by weight. The coating shall be carried out upto 300mm above FFL and shall be allowed to dry for 4-6 hours. (d) Appying a coat of TAPECRETE brush topping 1.5mm thick consisting of one part of TAPECRETE P-151, two parts of cement and two parts of silica sand by weight and cured to 2 days. (e) Applying 15mm thick plaster in CM 1:4 mixed with CICO super @ 100ml per 50 Kg cement on treated surface.

Surface excavation not exceeding 30cm deep and average 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed.

M&L for hard core of broken stone/bolder of gauge n.exc 63mm depositd, spread and levelled in layers n. exc 15cm thick including filling ineterstices using fine material as approved watered and rammed to a true surface complete al as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in haunching, kerb/fillets including necessary excavation earth work all as specified and directed.

Excavation in post holes in (or similar holes) each n.exc 0.5 cum, getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth arround in layers n.exc 25 cm thick and removal of surplus soil complete all as specified.

S&F mild steel framed work as in rectangular purlins, rafters and similar item circular tubes, square tubes complete including cutting, grinding, welding etc as required and fixing conforming to Fe-290 (Gde E-165) complete all as specified and directed. Note :- The quoted rates shall deemed to include for specific curvature/design for steel tubes and other similar steel sections.

S&F mild steel framed work as in joist, channel, angle or tee sections, circular tubes, square tubes fixed independently as in post, pillars, stanchions etc complete including cutting, grinding, welding etc as required and fixing conforming to Fe-290 (Gde E-165) complete all as specified and directed. Note :- The quoted rates shall deemed to include for specific curvature/design for steel tubes and other similar steel sections.

Supply and fixing 1.0mm thick mild steel plain black sheet in hearth covering to door shutters covering to door chowkhats (frames) chullahoods, watertanks, water troughs, ducts, urinal troughs and funnel etc cut to size edges beaded if directed holes punched including round headed screws clout nails or rivets and fixed to wood or steel members etc with plain 40mm lap joints or welded / riveted seams including bending , turning up, mitred angles stoped ends outlets etc as required complete all as specified and directed.

Supply and fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but not exc 10cm long, dia of neck 5 to 10mm as required complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per item no 150 above but for one 5 pin 5 Amp socket outlet point on an independent board.

All as per item no 150 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per item no 150 above but for one bell/buzzer point on an independent board.

All as per item no 150 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.

S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.

S&F Switch bell push flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 5/6 Amp, 230 volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 15/16 Amp, 230 volts complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.

S&F Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S & F in repairs call bell AC single pole 240 volts complete all as specified and directed

S&F ceiling fan regulator, electronic, rotary step up socket type, 230 volts suitable for 1200/1400 mm sweep ceiling fan including necessary connection complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 4 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB, single pole & neutral 40 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&Fin replacement of sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amps all as per specified and directed

S&F sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4sqmm nominal cross sectional area and one run of 4sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

S&F sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 6sqmm nominal cross sectional area and one run of 6sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as specified and directed by Engr-in-charge. Make Phillips Smart brite cat no BN 021 LED 22S 6500 PSU GR/SI or/Havells Endura linear neo cat no enduralinear neo BS22WLED865SPCWH/ Bajaj LED batten BCLAB 20W WH LED P

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.Make:Phillips smart brite cat no BN 021 LED 12S 6500/4000 PSU GR/SI or/Havells Endura linear neo cat no enduralinear neo BS10WLED865SPCWH/ HPL Neptune plus 10 w HLPT51510CW

S& F Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish, ( B-22/E27 base), with 01 No. 7/9 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements all as specified and as directed. Make Phillips Model Grace or Jaquar lighting cat no JNL-NKL-WLBPGG001E27/ Havells decorative model Floretine WL 1LS B22 SS cat no LHFOAJE1TZ1I060 ( Note: Rates incl 01X 7/9 W LED Bulb with each fitting)

S&F in repair LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts. Make philips Green line smart cat noBRP042 LED 25 CW R1 S1 PSU GR/ Bajaj Edge nxt LED cat no ENXT P 24L WH CR PC SD/ Eveready Mini might cat no LED SL025157-02

Taking down existing electric meter of any type and capacity and fixing back to location as directed including making all electric connections complete all as specifed and directed.

Supply and fixing in repair exhaust fan 250 mm sweep (white) plastic body with louvers including provn of flexible three core cable from ceiling rose to terminal for making connection, fitting on wall including all necessary fixing accessories complete all as specified and as directed . Make CG/Havells/Usha/Bajaj. Note :- Old fan shall be deposited in MES store yard of AGE E/M

Supply and fixing exhaust fan single phase 230/240 volt heavy duty of 300 mm sweep, 1400 RPM with suitable louvers including provn of flexible three core cable from ceiling rose to terminal for making connection, fitting on wall including all necessary fixing accessories complete all as specified and as directed . Make CG/Havells/Usha/Bajaj.

R K CONTRACTOR AND SUPPLIERS