Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.0 LAccepted-AOC | ₹4.0 L Quoted ₹4.1 L | L1 | Accepted-AOC Being lowest and reasonable. |
| 2 | L2₹6.9 L+₹2.8 L (68.1%)Rejected-Finance | ₹6.9 L+₹2.8 L (68.1%) | L2 | Rejected-Finance Being other than lowest. |
| 3 | L3₹14.5 L+₹10.4 L (254.8%)Rejected-Finance | ₹14.5 L+₹10.4 L (254.8%) | L3 | Rejected-Finance Being other than lowest. |
Tender Value
₹6.3 L
EMD Value
₹12,560
Closing Date
5 Sept 2024, 6:00 pmClosed
Garrison Engineer
Garrison Engineer (Project) Central, Opposite SBI, Brichgunj Military Station, Junglighat Post, Port Blair-744103
CERTAIN B/R REPAIRS TO PLASTER, FLOORING, SANITARY FITTINGS, INTERNAL WATER SUPPLY ETC AT OTM ACCN AT NEIL ISLAND (SHAHEED DWEEP) UNDER GE (P) CENTRAL, PORT BLAIR
2024_MES_663651_1
8108/E8
Open Tender
Miscellaneous Works
Item Rate
270 days
Port Blair
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹12,560
25 Oct 2024
3 Jul 2024
9 Sept 2024
3 Jul 2024
5 Sept 2024
18 Jul 2024
Amount
S&F as in repairs PTMT body health faucet (Hand Shower) with PVC pipe of length not less than 90cm and hook complete all as per sample Make Prayag/Polytuf/Shakti, complete all as specified and directed.
S&F as in repairs CP cast copper alloy body health faucet (Hand Shower) with flexible pipe of length not less than 90cm and hook complete all as per sample , complete all as specified and directed.
S&F as in repairs PVC/PTMT flexible waste pipe for WHB etc 32 mm dia of coupling and 80cm long PVC Collapsible corrugated waste pipe all as per sample Make Prayag/PolyTuf or equivalent , complete all as specified and directed.
S&F as in repairs PVC/PTMT flexible waste pipe for Sinks etc and 80cm long PVC Collapsible corrugated waste pipe all as per sample Make Prayag/PolyTuf or equivalent , complete all as specified and directed.
S&F as in repairs cast copper alloy chromium plated fancy type with crutch or butter fly bib cock screwed down for iron pipes of 15 mm bore , complete all as specified and directed.
S&F as in repairs cast copper alloy chromium plated fancy type with crutch or butter fly angle cock screwed down for pipes of 15 mm bore , complete all as specified and directed.
S&F as in repairs cast copper alloy chromium plated fancy type with crutch or butter fly Pillar cock screwed down for pipes of 15 mm bore , complete all as specified and directed.
Dismantling for corrugated steel sheeting, any gauge, thickness,including removing L-type or J-type bolts in Roof Covering.
Dismantling structural steel work including doors, gates , wind ties , gutter supports ,builtup section supports etc complete all as specified and directed .
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated/semicorrugated sheet 0.50mm thick as per approved profile, coloured, having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in ridges / framed semi circular or purpose made gutters etc complete fixed with self tapping screws all as specified and directed at site .
S & F MS Steel work in Rolled sections Fe 410 - W (Gde E-250) quality "A" as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other items, supports to existing towers etc framework for ACP sheet cladding etc and wind ties ,Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks forhanging fans; plain angle cleats for securing purlins to woodtrusses or rafters; knee pieceinserts; two way and three waystraps, plate washersincluding notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed
M & L for preparing to new steel/ Iron surfaces of any description exc 10cm Width or Girth and applying two coats of synthatic enamel paint over one coat of zinc chrome primer complete all specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc as Rain water pipes complete all as directed
S&F 110 mm bore PVC (SWR) bends any radius , complete all as specified and directed.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises, complete all as specified and directed.
M & L for 20 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded agg as in flooring finished fair and even without using extra cement, complete all as specified and directed.
M & L for first or premium quality coloured vitrified tiles 10 mm thick (square/rectangular) polished, area of each tiles n exc. 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed with coloured or white cement to match including screed bed 15mm thick in CM 1:4, complete all as specified and as directed by Engineer-in-Charge , complete all as specified and directed.
M&L for preperation of old treated surfaces and applying one coat of distemper oil emulsion , complete all as specified and directed.
S&F as in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed , complete all as specified and directed.
S&F as in repairs powder coated aluminium sections like glazing clips decogrill etc fixed to aluminium doors and windows complete all as directed and specified .
S&F 5 mm thick sheet glass fixed to aluminum windows and shutters as in repairs including hacking out old glass from metal frames etc , complete all as specified and directed.
S& F 25 micron Solar control film reflective type sticked to glass panes, complete all as specified and directed.
Dismantling of False Ceiling etc of any description, fixed in any position complete all as specified and directed
Refixing of old ceiling board incl aluminum grid and panels all as directed
M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long , complete all as specified and directed.
M&L for 12 mm thick Seamless calcium silicate ceiling board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screw having phillips head with under head cutter at 200 mm centre to centre,incl finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish and providing two coats of distemper acrylic emulsion of approved shade complete all as ditected. Note :- The false ceiling shall be provided in one or more levels incl providing space in between for fixing LED Tape Lights /cob lights etc. The pattern of False ceiling shall be all as approved by GE and directed by Engineer-in Charge
Taking down cement plaster from walls incl racking out joints all as specified and directed.
M&L for rendering 15 mm thick in CM 1:6 finished even & smooth with out using extra cement , complete all as specified and directed.
M&L for rendering on external surfaces in two layers , first layer of 10 mm thick in CM1:6 and second layer on top 5 mm thick in CM 1:4 finished even & fair w/o using extra cement , complete all as specified and directed.
M&L for preperation of new plastered surfaces and applying two coats of distemper oil emulsion over a coat of chalk whiting and primer , complete all as specified and directed.
M&L preperation of new plastered surfaces and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces , complete all as specified and directed.
S&F as in repairs Water closet Orissa Pan ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests , complete all as specified and directed.
S&F as in repairs Vitreous China wash down water closet pan (pedestal pattern), white incl seat cover and refixing of old flushing cistern , complete all as specified and directed.
S& F as in repairs PVC flushing cistern 9 Ltr cap dual flush type incl HDPE Flush pipe complete , complete all as specified and directed.
S&F as in repairs PVC connection 15 mm size with flexible pipe and PTMT nuts complete 450mm long , complete all as specified and directed.
S&F as in repairs PVC water closet seat , white, closed pattern with flat bottom, and cover and PVC hinging device , complete all as specified and directed.
S&F as in repairs LED Lumanaries 600x600mm ,35/36 Watt 220V recessed type with high efficiency PMMA diffusers soft glare free lighting complete with all drivers holders incl LED lamp suitable for roof ceiling incl connection with drivers connecting up with three core flexible copper conductor of suitable size Make Philips/Wipro/Havels/Bajaj , complete all as specified and directed.
S&F as in rep LED Strip indoor type12 Volts 14.6 Watts of colour Blue Green and Red WH.WW,NW complete with drivers and all acessories all as specified and as directed Make Luker Loro indoor strip Product Code LS5050 or equivalent in Philips/Wipro etc , complete all as specified and directed.
Taking down of existing partitions of aluminium alloy sections with glass panels and removal from site , complete all as specified and directed.
M&L for 10 mm thick frosted toughened glass with SS patch fittings as brackets cleats etc as in partitions , complete all as specified and directed.
S&F as in repairs Handle lock for doors Make Dorset with a set of 3 keys Backset 60mm complete all as per sample , complete all as specified and directed.
S&F as in repairs Dorset DC 65CO concealed type door closer with in built hold open arm feature for doors of weight upto 65Kg silver finish all as specified and directed.
S & F as in repairs Glass Shelf Model Jaquar ACN-1171N or Techno commercial equivalent 600 mm long , complete all as specified and directed.
S & F as in repairs Stainless Steel Towel Rack Model Jaquar ACN-1181FHS 600 mm size or equivalent , complete all as specified and directed.
S & F as in repairs Toilet Roll Holder Model Jaquar ACN-1155S Stainless Steel or equivalent , complete all as specified and directed.
S & F as in repairs Double Coat Hook Model Jaquar ACN-1161N or equivalent , complete all as specified and directed.
S & F as in repairs Model Jaquar ACN-1193N Double Arm Wall Mounted Reversible Plain / Magnifying (X3) Pivotal Mirror or equivalent , complete all as specified and directed.
S & F as in repairs Towel Ring Model Jaquar AKP-35721P or equivalent , complete all as specified and directed.
NIAMAT ALI (BID ID -3086468)
KBR CONSTRUCTIONS (BID ID -3072916)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .