REPAIR AND CLEANING OF SEWAGE LINES, MANHOLE, SEPTIC TANKS, SOAKAGE WELLS, CULVERTS AND BOUNDARY WALLS IN ZONE-IV AND ZONE-VI UNDER AGE BR-IV OF GE(S) MEERUT CANTT

Amount

Material and labour for cleaning of sewage lines,manhole by jetting and well flushing the sewage lines by mechanical means after removing of sludge including taking off the manhole cover and refixing after cleaning of manhole of any size and depth. The manhole lines to be cleaned through mechanical sludge trailor and all sludge to be removed to a distance with in of 3 km outside of the cantt area.( Note. ( a ) The contractor shall provide sufficient Men and machinery everyday to cater for all type of complaints.(b) the period of complection for each complaints shall be 24 hours .(c) it will be the responsibility of the contractor to get the complaints completed with in stipulated period the labour and machinery shall be made available during the office hours for any complaints.(d) The payment shall be made contractor on the basis of complaints slips.No payment shall be done for any incomplete work .(e) The contractor to quote the rates accrodingly complete all as specified and directed.

All as per item No 1.00 above, but cleaning the blockage of WC's, toilets, kitchen, Sink.

Cleaning of sewage lines 150mm bore including man holes gully trap, grees trap etc up to 1.50m deep by removing all silt, foreign material and other deposits what so ever completely and making the lines free from all obsticles and testing the flow of sewer line evenly, smoothely by filling water the operator will carried out in suitable length by blocking the first and last man hole of path and removing the silts/edge out of defence land completed all as specified and dircted.

Dewatering of Soak well/pit/septic tank any size/capacity by discharging the sewage water into a sealed tanker with hanze pipe system including vehicle, complaint and disposing within 3KM outside cantt area all as directed by the Engr-in-Charge.

Excavation and getting out of sludge from septic tank and soak well in any depth by any means and removing to the distance up to 3 kms out side cantt area and deposited in approved lying areas all as directed by Engr-in-Charge.

Material & labour salt glazed stone ware drain pipes laid in trenches and jointed as specified internal diameter of pipe 150 mm including demoiltion of pipe complete all as specified and directed.

Material and labour concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 for 150 mm dia pipe work in foul position complete all as specified and directed.

Material and labour PCC 1:3:6 type C-2 as in surface channel or drains complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation manholes etc and getting out in loose/soft soilcomplete all as specified and directed.

Material and labour 1:3:6 type C-2 using 40 mm graded stone aggregate as per foundation filling and mass concrete complete all as specified and directed.

Material & labour for brick work with fly ash bricks built in CM (1:6) straight or curved exceeding 6mtr mean radius complete all as specified and directed.

Material & labour for brick work with subclass ‘B’ bricks in CM (1:6) straight or curved exceeding 6mtr mean radius Except bricks including cleaning and reusing old bricks complete all as specified and directed.

Material and labour PCC 1:2:4, type B-1 (20 mm graded aggregate) as in coping and benching and the like including weathering slightly rounded or chamfered angle and throating as directed.

Material and labour rendering 15 mm thick in cm 1:6 on fair faces of brick wall finished fair and even complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

Demolition brick work built in cement mortar including all quoins arches pillars etc complete all as specified and directed.

Taking down cement plaster on brick work or stone walls etc including racking out joints hacking for key, scrubbing down with water etc complete all as pecified and directed.

Demolition cement concrete in ground floor and paving not exceeding 15 cm thickness (below of above ground level) un-reinforced as in PCC benching PCC bed etc complete all as specified and directed.

S & F mild steel TMT bars 10 mm dia ad over cut to lenth bent to shape requir including cranking banding spirally and binding with MS wire not less than 0.9 mm dia complete all as specified and directed.

All as per item No 19 above, but 6 to 8 mm dia .

Material and labour RCC type B-1 1:2:4 using 20 mm graded agg as in slabs supported on walls as in soak well/septic tank etc complete ( cast in situ) including as per requirement of form work and demolition of RCC.

Material and labour Cement concrete as in cover slabs (for manholes etc PCC 1:2:4 type B-1 (20 mm graded aggregate) set in cement mortar 1:6.including as per requirement of form work and Demolition RCC complete all as specified and directed.

Material and labour PCC 1:4:8 type D2, 75 mm thick (using 40 mm graded stone aggregate) as in as in sub base of flooring complete all as specified and directed.

Material & labour for 40mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring, surface finished even and smooth by using extra cement including demolotion of old PCC complete all as specified and directed .

Supply only 3mm thick and 38 mm wide glass strips as in floor complete all as specified and directed .

Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 110 mm bore as in waste and rain water pipes complete all as specified & directed.

Supply and fix in repair PVC bends 110 mm bore, any radius complete all as specified & directed.

S&F in repair PVC (SWR),110mm junction single, (Single T) equal or unequal complete all as specified and directed.

S&F as in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, including flushing cistern & flush pipe fixed as in repair with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

S&F as in repair vitreous china wash down water closet pan (pedestal pattern), white (flushing cistern and flush pipe) fixed with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

Supply & fix in repair white plastic seat cover for W.C.(E.T.) white including M.S. CP or aluminium hinging device complete all as specified and directed.

Returning , filling in including spreading , levelling , watering and well ramming in layers not exc 25 cm in solft/loose soil complete all as specified and directed.

Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point soil complete all as specified and directed.

S&F RCC jalli Type B-0 (using 12.5 mm graded stone aggregate) 25mm thick (measured solid) including all factory made moulding complete all as specified and directed.

Taking down existing barbed wire of any description complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Dismantling chain link fencing wire mess of any type complete all as specified and directed.

Dismantling posts and struts (wood, steel or RCC) any section, including taking out embeded portion and making good disturb ground complete

S&F Mild steel angle iron post as in fencing posts, cut to length, drilling holes, welding and embedded in concrete complete all as specified and directed.

Fixing only steel chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc. incl provision of binding wire complete all as specified and directed.

Supply only chain link fencing of any dia wire made upto into matresses complete all as specified and directed.

S&F 40x5 mm thick flat iron as in fastening of chain link fencing fixed to nuts and bolts including holes complete

S&F Mild Steel flat, round or square bar for straining, in available length, cut to length, bent to shape required Fe-410W (Gde E-250) quality 'A' complete all as specified and directed.

S&F in repair galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia bars at 75 mm spacing complete all as specified and directed.

S&F for Framed work such as grills, gratings with ends of bars shouldered and/ or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, including for ornamental and intricate design all as specified and directed.

Material and Labour for applying two coat of synthetic enamel paint over prepared old /new steel surfaces of any description, not otherwise described over 10cm width or girth and complete all as specified and directed.

Material and labour framed work as in doors, door chowkats or gates of angle iron or other section with gusset plate, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290 (Gde E-165) complete all as specified and directed.

Supply & fixing Mild Steel works (Miscellaneous) as in hold fasts etc and similar small articles confirming Fe-290 Gde-E-165 complete all as specified & directed.

S & F 1.6mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

Material and labour for 12 mm thick Granite (of any type) work (table rubbed and polished) in wall linning, Columns, Pillars, steps and like in cement mortaar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match including dismantling of old complete all as specified and directed.by Engr-in-Charge

Material and labour for coloured / Black Glazed ceramic tiles in vertical surfaces 450x350x7 mm thick, Joint free tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM (1:4) including dismantling of old tiles complete all as specified and directed. by Engr-in-Charge

Material and labour for 60 mm thick, interlocking paver block PCC type M-35 with grey cement & pigment, of shape approved by GE, in paths over & including 25 mm thick sand cushioning bed complete all as specified and directed.

Material and labour for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors With Grey Cement and pigment laid over including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Material and labour for extra for forming fair finished drain or channle 30cm inner girth in cement concrete, using extra cement, incl forms, moulds, mitred / stopped ends etc complete all as specified and directed.

Material and labour for reinforced concrete pipes, class NP2, 300mm bore with collars, laid and jointed, fixed as in repair complete all as specified and directed (Excavation & earth work and PCC shall be measured and paid for separately) complete all as specified and directed.

jitendra AND Co

YADAV CONSTRUCTION COMPANY

AR Enterprises

ATHARV CONSTRUCTION

M/S AGARWAL CONSTRUCTION CO.