SPECIAL REPAIRS FOR REPLACEMENT OF BER PUMPS SETS OF VARIOUS CAPACITY AND SUCTION SWEEPER OTHER ALLIED SERVICES AT SWIMMING POOL UNDER GE MIS MHOW

Amount

Supply, lowering, installing & testing submersible pump set of capacity 5 HP slip start synchronous run motor(S4RM/BLDC type), 7 stage pumps with SS 304 grade impeller, shaft duplex steel. casing SS 304, Pump motor SS 304 suitable for 6" bore well along with in and including pump control panel smart VFD driven with phase reversal protection, dry run protection, over & under voltage protection, fault induction alarm, energy monitoring and remote monitoring system to access through mobile or computer by manufacturer application for 5 year period by providing sim card etc complete all as specified, directed and for entire satisfaction of Engineer-in-charge. Make Shakthi or equivalent make as approved by GE.

All as per item No.1 here -in - before but of capacity 3 HP motor with 33 stage pump.

All as per item No.1 here -in - before but of capacity 7.5 HP motor with 10 stage pump.

All as per item No.1 here -in - before but of capacity 5 HP motor with 9 stage pump.

Supply, lowering, installing & testing Monoblock open well submersible pump set of capacity 10 HP slip start synchronous run motor(S4RM/BLDC type), pump made with made SS 304 impeller, SS 304 casing, shaft duplex steel, CI base frame with CED coated, for working head range between 35 - 48 Mtr and flow 10 to14 LPS, including necessary suitable control panel smart VFD driven with phase reversal protection, dry run protection, over & under voltage protection, fault induction alarm, energy monitoring and remote monitoring system access through mobile or computer by manufacturer application for 5 year period by providing sim card etc complete all as specified, directed and entire satisfaction of Engineer-in-charge. Make Shakthi or equivalent make as approved by GE.

Supply, lowering, installing & testing Monoblock open well submersible pump set of capacity 30 HP slip start synchronous run motor(S4RM/BLDC type), pump made with SS 304 impeller, SS 304 casing, shaft duplex steel,CI base frame with CED coated, for working head range between 27- 40 Mtr and flow 12 to 31 LPS. including necessary suitable control panel smart VFD driven with phase reversal protection, dry run protection, over & under voltage protection, fault induction alarm, energy monitoring and remote monitoring system to access through mobile or computer by manufacturer application for 5 year period by providing sim card etc complete all as specified, directed and for entire satisfaction of Engineer-in-charge. Make Shakthi or equivalent make as approved by GE.

Supply and fix 3 phase induction motor of capacity 3 HP (flocculator motor), 1440 RPM, 440 volts with IE-3 specification complete all as specified and directed. Make: Shakthi or other equivalent as approved by GE.

Supply and fix 3 phase induction motor of capacity 5 HP (Clarifloculator Motor), 1440 RPM, 440 volts with IE-3 specification complete all as specified and directed.

Supply and fix 3 phase induction motor of capacity 5 HP (Flash mixer Motor), 1440 RPM, 440 volts with IE-3 specification complete all as specified and directed. Make: Shakthi or other equivalent as approved by GE.

Supply and fix stainless steel vacuum head suction sweeper of 900 mm (36 inch) size complete with accessories including sewage centrifugal pump set electric driven of capacity 3.0 HP, 3 phase, 440 Volt mounted on moving stainless steel trolley heavy duty with 15 Mtr cable of existing design suitable to operate at swimming pool for sweeping the pool including all accessories such as starter and control panel 30 Mtr deluxe floating hose pipe etc. MAKE: Lyxar or other equivalent as approved by GE.

S&F in replacement of PVC insulated sheathed 1100 volt grade copper conductor cable flat multi stranded for submersible pumps in bore well of the following size Note:- Lifting & Lowering of Pump set shall be measured and paid separately under relevant item.

3 core 4 sqmm

3 core 6 sqmm

S&F in repairs Single core multi stranded copper conductor PVC insulated heavy duty cable of 35 sqmm all as specified and directed

S&F in repairs Single core multi stranded copper conductor PVC insulated heavy duty cable of 50 sqmm all as specified and directed

S&F in repairs gun metal gate valve 50 mm bore with iron wheel head, screwed both ends for iron pipe including necessary GI fittings and testing complete all as specified and directed.

Supply and fix including dismantling the old foot valve ball type with rubberised steel ball and CI body flanged/screwed at the end of the suction line for the following sizes:- (Make : NORMEX or other equivalent make as approved by GE.)

150 mm dia

200mm dia.

Supply and fix cast iron non return valve of 150mm size, swing Horizontal type foot valve with rubberised steel ball and CI body flanged fixed between exit of the pump and delivery pipe line including dismantling old unserviceable one:- (Make : NORMEX or other equivalent as approved by GE.)

S&F Sluice valves of 150mm size, cast iron body, double flanged, ISI marked (IS-14846), heavy duty, class PN-1.6 gun metal, with rising spindle of solid forged bronze and operating handle, including rubber gaskets, nuts, bolts, washers etc including removing old unserviceable valves all as specified and as directed by Engineer-in-Charge. Make "Kirloskar/Upadhaya/Zoloto"

M&L for MS Pipes of size 200mm dia with double flanged including bends and fittings complete including making necessary cutting, welding /forging to connect with existing header all as specified and directed. Make : Jindal / TATA or other equivalent as approved by GE.

Supply, fixing, laying & jointing galvanised iron water tubes 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc. laid in trenches, lowering in bore wells etc. and testing complete all as specified and directed of following sizes

25 mm bore

50 mm bore

Supply, install testing and commissioning DECRIN DOSING PUMP MODEL 96NGQ51 Reciprocating pump feeder for injecting Chlorine solution employing motor-driven reciprocating chemical pump having output of 2 U.S GPD to 4 US GPD and adjustable high pressure of upto 100 PSI with the following specifications:- (i) High Pressure Single Head Gear Motored Adjustable dosing pump. (ii) Adjustable High Pressure 0 to 100 PSI (iii) Power 230 Volts, 50 Hz (iv) RPM-44 (v) HP- 1/30 Fractional (vi) The following accessories as per Manufacturer's Instructions:- (a) Lead Tubing (b) Connecting nuts (c) Injection Check Valve (d) Clay Weight (e) Ferrules Note:- (a) Liquid end of the Dosing Pump and accessories (b) Length of Lead Tubing shall be as per ground requirement. The bidder requested to visit the sites before quoting the rates and to quote rates accordingly. (c) Boring of CI/DI delivery lines for fixing of ferrules and all other connection including connecting the chlorine injector to delivery line and making it leak proof including adjusting the flow rate to achieve 2 ppm residual chlorine at existing delivery line all as specified and directed. Rate quoted shall deemed to be inclusive for above provision. (d) The complete system shall tested to entire satisfaction of Engineer-in- charge.

Supply, installing, testing and commissioning of Altoch Dosing System consisting of 100 Ltrs capacity FE/FRP MOC with PE/ FRP Lid & Level gauge along with Single Phase Electric Motor and Agitator with Shaft and blade in Plastic, mounted on tank, Lid with port hole for pouring chlomine chemical water and provision for mounting dosing pump on the lid/ wall etc complete.

M&L for providing brick masonry basement for Dosing System of size 1.2 x 1.2 x 0.6 M with cement concrete 1:4:8 type D2 using 40mm graded stone aggregate in foundation including necessary excavation and plastering and suitable iron grill shelter for protection of Dosing System with angle iron Frame with 12 mm square bar @15 cm c/c including necessary locking arrangements, welding and grouting etc. complete all as specified and as directed by Engr-in-Charge.

M&L for point wiring for one 3 pin socket outlet 5 Amps on same board with other switches along with PVC insulated sheathed stranded copper conductor cable of size 2 x 1.5 Sqmm with PVC insulated sheathed stranded copper conductor cable of size 1.0 Sqmm for earth continuity wire, to be drawn in and including FR PVC heavy duty casing capping not less than 20 mm width including MS sheet metal switch / terminal box 1.2 mm thick and Hylum sheet switch including all necessary wall cutting for sinking's of boxes and making good disturbed surface all as directed and specified .

M&L switch socket combination 2 in 1, 5 Amps flush type including connection complete all as specified and directed by Engr-in-Charge

Supply and fix Sheet Metal enclosure single door, 2 way, single pole and neutral complete all as specified and as directed.

Supply and fix MCB 6-32 Amp SPN, 'C' Series 240/ 415 V, 50 Hz, 10 KA, suitable for motor and other induction loads complete all as specified and as directed.

Supply, lay or fixing or passing through pipe, 1100 volts graded heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed stranded conductor 2 core of size 4.00 Sqmm nominal cross section for service connection complete all as specified and as directed by Engr-in-Charge

S&F mild steel angle iron framed work as in grills grating for valve chambers, to protect motors and gears & LT panels from rain on scrapper unit and ladder etc using angle iron of size 50 mm x 50mm x 6 mm thick and 6 mm thick MS plate, framed guard bars including necessary locking arrangement and applying two coat of synthetic enamel paint over a coat of primer complete.

Supply and fix Gun metal water meter with Screwed ends of size 25 mm bore Make : KRANTI/KUSHAL

Supply and fix cast iron Bulk water meter enclosed type (metallic gears) with flanged ends of size 50mm bore Make : KRANTI/KUSHAL

Earthing complete with galvanised steel earth plate electrode of size 600mm×600mm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less 'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron including 20 mm dia light grade GI tubing for protection of earth lead, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm dia, charcoal or coke and common salt in alternative layer of 15 cm compacted thickness all around the electrode and concrete earth pit with PCC 1:3:6 type CI, 50 mm thick precast RCC (1:2:4) type BI pit cover reinforced with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar including GI strip of size 32 mm x 6 mm for extension of earth lead including necessary excavation, earth work, in any type of soil and disposal of spoils to a distance not exc 50 mtr and necessary connection and testing complete all as shown in electrical plate No. 3 all as specified and directed.

NIDHI CONSTRUCTION