Loading
Loading…
Loading…
Tender Value
₹1.5 Cr
EMD Value
₹3.0 L
Closing Date
18 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
TRACK
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V which ever is less ; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility criteria: (a)The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered atleast 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.
Similar Nature Of Work:- Any Railway Track Work including Track Maintenance Work.
18 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The original Bank Guarantee (in lieu of Bid Security) should be delivered in person to the official nominated (i.e.OS/Tenders/Engg/NED Division) within before closing date for submission of bids.(i.e., excluding the last date of submission of Bids).
All the instructions furnished in the Technical Compliance/ Commercial Compliance/ Custom/ Undertakings/General Instructions/Undertakings are only indicative and not exhaustive. The tenderer shall read the GCC/Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
Tender value is including escalation of (-) 10% (minus ten percent) on CPWD DSR rates Tender should note this before quoting the rates.
Proposed safety related track works under in SSE/Pway/LSR & SSE/Pway/AWB under ADEN/AWB's jurisdiction Under DEN/W/NED's Jurisdiction.
T-202627-3-022
T-202627-3-022
Open
Works - General
9 Months
Nanded, Maharashtra
₹0
₹3.0 L
18 Jun 2026
22 May 2026
4 Jun 2026
92 items across 3 schedules · ₹1,49,90,535.94 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | 1:1½:3 (1 Cement: 1½ coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size) | cum | 50.00 | 2,509.53 | 1,25,476.5 |
| 2 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) | cum | 40.00 | 2,665.18 | 1,06,607.2 |
| 3 | 300mm dia. | Metre | 50.00 | 1,561.2 | 78,060 |
| 4 | 600mm dia. | Metre | 40.00 | 3,131.43 | 1,25,257.2 |
| 5 | Dewatering of natural or accumulated water from any location. Payment to be done for Horse power of pump multiplied by pumping hours. | HP Hour | 9000.00 | 40.58 | 3,65,220 |
| 6 | Lubrication of ERCs and its liner contact area by removal of ERCs and Metal / GFN liners in rail panel, cleaning of rust / scale of ERC, Metal / GFN liners & SGCI insert by using wire brush, scrapper / sand emery paper etc supply and application of graphite grease, as prescribed by Railway for under side of liners & corresponding area of rail foot & SGCI insert with ERCs and re-fixing the same as per procedure prescribed in latest edition of IRPWM with contractors grease and all other tools & plants complete and as directed. Note: Each ERC in this item shall constitute 1 ERC and its Liner Contact area. | ERC | 42212.00 | 5.45 | 2,30,055.4 |
| 7 | Removing seized ERC from SGCI inserts of existing track by using suitable approved chemicals and re-fixing after greasing of insert eye and ERC with Contractor's grease of specified quality as per provisions of IRPWM, as directed by Engineer in-charge. Note: 1.List of Seized ERC along with location shall be prepared after inspection of SSE/P.Way and marked prior to execution of this item. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if SGCI insert is broken or sleeper gets cracked in the process. | ERC | 3500.00 | 44.66 | 1,56,310 |
| 8 | By using Railway's Grease graphite | Each | 8000.00 | 26.99 | 2,15,920 |
| 9 | Renewal of seized Plate/Rail screws on PSC Sleepers by using gas or any approved methods, duly drilling holes in broken screw and removing existing screw pieces from the holes along with existing dowels and fixing new contractor's dowels (procured from RDSO approved sources) and grouting around dowel with Epoxy materials of approved specification and refixing new Railway's rail/Plate screws duly greasing the s c r e w w i t h specified grease with all contractor's materials, consumables, tools & plants, labour with all lead, lift. Note: 1.Seized screws shall be identified and marked by JE/P.Way and verified at minimum SSE/P.Way In charge) level. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if sleeper gets damaged in the process. | Each | 4000.00 | 250.56 | 10,02,240 |
| 10 | Boxing and profiling of ballast as per procedure prescribed in latest edition of IRPWM including cess dressing on both sides of track. The work will include removing excess ballast from track and putting the same in crib and shoulder by leading to a maximum of 50m including crossing of track, deweeding on ballast section etc and as directed by Engineer-In charge. | TRM | 24440.00 | 22.66 | 5,53,810.4 |
| 11 | In-situ reconditioning of MCI insert of points & crossings sleeper by reclaiming the worn- out portion to the desired height, grinding of the finished profile for regaining the toe load lost. The reconditioning to be done by using TERRA C I-94 - Electrodes of make L & T, Advani Oerlicon, Diffusion, SHARP - 650, or equivalent approved by RDSO for reconditioning of Cast iron alloys. removing and refixing the required fittings for reconditioning in traffic condition. The cost includes all labour, lead lift, transportation of men and material, cost of consumables, hiring of machinery required etc, complete and as directed by the Engineer-in -charge. | Each | 1100.00 | 266.29 | 2,92,919 |
| 12 | For PSC Sleeper | TRM | 11818.00 | 77.12 | 9,11,404.16 |
| 13 | 1 in 8½ PSC layout | Set | 18.00 | 9,887.36 | 1,77,972.48 |
| 14 | 1 in 12 PSC layout | Set | 18.00 | 12,857.58 | 2,31,436.44 |
| 15 | With Contractor's hard wood block. | Each | 80.00 | 2,239.07 | 1,79,125.6 |
| 16 | Cleaning of side drains along the track including disposing of muck beyond Railway boundary as per instructions of Engineer in- charge to keep drains clean and clear in cuttings etc. | RM | 6000.00 | 27.86 | 1,67,160 |
| 17 | 1 in 12 Turnout | Set | 63.00 | 1,110.71 | 69,974.73 |
| 18 | 1 in 8½ Turnout | Set | 33.00 | 717.27 | 23,669.91 |
| 19 | Derailing Switch | Set | 35.00 | 358.63 | 12,552.05 |
| 20 | Kilometre & Gradient post | Each | 350.00 | 85.27 | 29,844.5 |
| 21 | LWR / SEJ Board | Each | 60.00 | 150.25 | 9,015 |
| 22 | Level Crossing Boards including Road Sign Boards | Each | 50.00 | 170.99 | 8,549.5 |
| 23 | Level Crossing Post | Each | 55.00 | 169.17 | 9,304.35 |
| 24 | Curve Post | Each | 70.00 | 90.22 | 6,315.4 |
| 25 | Curve Board | Each | 90.00 | 150.25 | 13,522.5 |
| 26 | Bridge Board | Each | 31.00 | 150.25 | 4,657.75 |
| 27 | Bridge Tablet | Each | 36.00 | 42.99 | 1,547.64 |
| 28 | Bridge Height Gauge | Each | 48.00 | 2,553.45 | 1,22,565.6 |
| 29 | HFL, FSL & DL on Bridge Pier / Abutment | Each | 200.00 | 640.87 | 1,28,174 |
| 30 | Miscellaneous General Boards, Jurisdiction Boards, Structures etc. | Sqm | 80.00 | 116.55 | 9,324 |
| 31 | Extraction of jammed ERC by Heavy Duty Hydraulic Extractor with contractor's tools & plants, equipment, consumable with all lead & lift etc. complete, as directed by Engineer in-charge. Heavy Duty Hydraulic Extractor for jammed ERCs (10 Ton capacity) shall be used as per RDSO's Specification No. TM/SM/6, dated 8.05.1991. | Each | 2000.00 | 30.44 | 60,880 |
| 32 | Level crossings with asphalted road surface | Sqm | 500.00 | 491.79 | 2,45,895 |
| 33 | Level crossings with concrete blocks road surface | Sqm | 50.00 | 447 | 22,350 |
| 34 | Level crossings with any other type of road surface | Sqm | 50.00 | 402.22 | 20,111 |
| 35 | 80mm thick blocks of M-35 grade for medium traffic. | Sqm | 20.00 | 999.79 | 19,995.8 |
| 36 | Provision of one Asphalt Speed Breaker Rumble Strip on each side of the approaches of manned level crossings as per approved drawing including painting two coats with paint of approved quality and colour. | RM | 100.00 | 680.74 | 68,074 |
| 37 | Manufacture & supply of tested GI wire rope of 6mm dia. and 6 ply to suit lifting barrier gates at nearby P.Way Stores / Depot / Level Crossing gate, as directed. | Kg | 160.00 | 468.28 | 74,924.8 |
| 38 | Manufacturing, supplying and fixing Wicked Gate of size 1025mm x 1025mm x 1000mm at manned level crossings, as per approved drawing including painting with 2 coats of specified enamel colour paint over 1 coat of primer including earthwork in excavation etc. complete, as per specifications and as directed. | MT | 7.00 | 1,08,917.07 | 7,62,419.49 |
| 39 | With Contractor's hard wood block | Each | 90.00 | 2,736.89 | 2,46,320.1 |
| 40 | Providing Rail Barricading with rails supplied by Railways with verticals provided at every 1.5m interval, height of barricade being up to 1.5m above ground / termination level and one or more row of horizontal rail, duly cutting rails and drilling holes as required, assembling necessary accessories to required length, including earthwork excavation for foundation, fixing posts in cement concrete 1:3:6 base of size 0.45m x 0.45m x 0.60m and one coat of red oxide painting of steel work. Note: 1. Excavation and concrete work will be paid separately. 2. Rail shall be made available within 250 metres | MT | 40.00 | 1,386.19 | 55,447.6 |
| 41 | Providing and fixing of flared portion of guard rails of any rail section over PSC sleepers including fixing of with all fittings, including leading of rails and fittings, squaring and adjusting spacing of sleepers as required, providing nose blocks duly cutting wooden blocks supplied by railways and fixing it with bolts of 16mm dia as directed complete and finished as per RDSO's approved drawing. Note: 1.One set consists of LH & RH side rails of one end. 2.Required P.Way fittings will be supplied at SSE stores depot. | Set | 64.00 | 3,189.64 | 2,04,136.96 |
| 42 | Manufacturing and supply of circular STOP Disc of 600mm dia for fixing on emergency chains at level crossings as given in IRPWM including providing Retro reflective sheet fully covered over board confirming to type- IV of ASTM-D4956 in red back ground colour and text "STOP" of white colour over back ground. The circular board shall consists of 2mm thick Aluminium sheet fixed to 1.5mm thick MS Sheet of 600mm dia with suitable sized aluminium alloy rivets @ 20 cm c/c to back-support .Retro reflective sheet is to be pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of ASTM- D-4956-01.A vertical holding stand of 1000 mm length x15mm thick to be jointed to back side of board along with a hook for fixing emergency chain as directed by Engineer In charge. | Each | 26.00 | 3,565.1 | 92,692.6 |
| 43 | Caution Indicator Board of size 1400mmx400mm with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of 3650 mm long | Each | 35.00 | 6,231.22 | 2,18,092.7 |
| 44 | Speed Indicator Board of equilateral triangular shape having each side of 1000mm with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of 3650 mm long | Each | 40.00 | 5,388.98 | 2,15,559.2 |
| 45 | Termination Indicator Board of Circular shape having diameter of 1000mm with back support frame welded to vertical post of MS angle of size 50mmx50mmx6mm of 3950 mm long | Each | 60.00 | 7,524.7 | 4,51,482 |
| 46 | Supply and fixing in position pre-cast cement concrete Fouling Mark as per approved drawing at station yard, duly painting the top surface and slopes with white enamel paint in two coats and inscribed letters with black of Fouling Mark, complete in all respects with all labour, materials including cement, tools and plants etc. | Each | 50.00 | 417.41 | 20,870.5 |
| 47 | Providing and fixing Trolley Refuge of size 3.0m x3.0m on cess, placing with released unserviceable PSC sleepers and keeping them at all four sides of refuge and also placing as matting inside the refuge by keeping them in upside down position with a minimum of 14 sleepers including levelling with earth, excavation, all lead and lift, crossing of tracks, leading the sleepers with in a free lead and lift, handling etc., with all contractor's men material complete and as directed by the Engineer-in-charge. Note: Earth-work will to be paid separately under relevant item. | Each | 90.00 | 3,471.5 | 3,12,435 |
| 48 | Supplying and spraying in specified proportion Weedicide Chemical, capable to kill entire weed on track / cess / embankment with all labour, material, tools & plants etc. complete job in all respect. Scientific name of the chemical is Isopropylamine Salt of Glyphosate, in which active ingredient is Glyphosate (41%), colour is light amber to brownish, very low in toxicity and has favourable environmental characteristics. It will be ensured that no weed growth occurs up to six months period, otherwise re-spraying shall be done by the contractor free of cost. | Sqm | 1340000.00 | 0.58 | 7,77,200 |
| 49 | 1 in 8½ Switch Assembly | Set | 40.00 | 753.26 | 30,130.4 |
| 50 | 1 in 12 Switch Assembly | Set | 70.00 | 1,036.23 | 72,536.1 |
| 51 | JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity | Hour | 1100.00 | 870.14 | 9,57,154 |
| 52 | Hydra or similar tyre mounted Pick-n-Carry crane of 12T capacity for misc. works of handling of material | Hour | 700.00 | 836.21 | 5,85,347 |
| 53 | Tractor with Trolley for local transportation or other misc. works. | Hour | 650.00 | 200.69 | 1,30,448.5 |
| 54 | Arranging labour as and when required by the Engineer in charge, for various works under SSE/P.Way, with contractor's T&P, equipments, hand signal flags, etc. as per specifications, special conditions and detailed scope of work as furnished in the tender and as directed by the Engineer in charge. Note: Item shall be operated with prior approval of concerned Sr. DEN / DEN in charge. | Day | 4020.00 | 606.09 | 24,36,481.8 |
| 55 | Supplying and filling 50 kg size empty cement polythene bags with Rly. Ballast/moorum/earth/Sand/quarry dust etc. placing the filled bags on the high banks /bridge approaches/nominated place etc. dumping and spreading at the nominated locations to profile under block period with all contractor's labour, tools, plants, loading, unloading, filling, spreading including all lead/lift etc. complete and as directed by the Engineer in charge at site including crossing of track where necessary. | Each | 1300.00 | 13.7 | 17,810 |
| Schedule total | ₹1,34,66,785.86 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TechnicalspecificatinsRailwayEnggdepartment.pdfSECURED.pdf Technical Condition
ATTACHMENT
HQGuidelineWorks15.09.23PDF.pdfSECURED.pdf
ATTACHMENT
ACS1to6.pdf
ATTACHMENT
AdvanceCorrectioSlip7-10forGCC.pdf
ATTACHMENT
PVC condition
ATTACHMENT
RevisedApprovedBrandlist-SCR.pdf
ATTACHMENT
CoSignedSplConditinFortranspotationItems.pdfSECURED.pdf
ATTACHMENT
InstructiontoMSE.pdf
ATTACHMENT
QtyLSRAWbQty.pdf
ATTACHMENT
SQSQ3CessSplCondition2026.pdf
ATTACHMENT
TenderBookletNEDNEW1.pdf
ATTACHMENT
TenderBookletNEDNEW2.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_11GCC2022.pdf
ATTACHMENT
PVC-forthevalueoftheworkdoneincludingvariationinquantities._1.pdf
ATTACHMENT
TechnicalspecificatinsRailwayEnggdepartment.pdfSECURED.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .